load life performance capacitor HYNCDZ E2331M6R3C080HY with 2000 hours rating at 105 degrees Celsius

Price Negotiable

Price: Negotiable

MOQ: Negotiable

Delivery Time: Negotiable

Product Description

Product Overview

The E2 Series Solid Electrolyte Aluminum Electrolytic Capacitor (E-CAP) from Hyncdz offers low ESR and high ripple current capabilities. Designed for a load life of 2000 hours at 105, these capacitors are RoHS compliant and suitable for various electronic applications requiring reliable performance.

Product Attributes

Brand: Hyncdz
Series: E2 Series
Type: (Lead pin type)
Certifications: RoHS Compliant

Technical Specifications

Series	Capacitance (F)	Capacitance Tolerance (%)	Rated Voltage (VDC)	Surge Voltage (VDC)	Dissipation Factor (Max.) (120Hz/+20)	Leakage Current (Max.) (2min, +20)	ESR (Max.) (100KHz, +20) (m)	Ripple Current (Max.) (100KHz) (mArms)	Load Life (Hrs)	Diameter (mm)	Length (mm)	Pitch (mm)	Wire Diameter (mm)	Color
E2	330	20 (M)	6.3	7.2	0.08	416 (I0.2CV or 500A)	15	3100	2000	6.3	8	2.5	0.6	(Red)

Detailed Specifications

Category Temperature Range

-55 ~ +105

Rated Voltage Range

2.5 ~ 25V

Low Temperature Characteristics

Z(-25)/Z(+20) 1.25 (100KHz)
Z(-55)/Z(+20) 1.25 (Max.Impedance Ratio)

Endurance (105, 2000 hours)

Appearance: No significant damage
Capacitance change: 20% of the initial value
D.F.(tan): 150% of the specified value
ESR: 150% of the specified value
Leakage current: The specified value

Damp Heat (Steady State) (60, 90%~95% RH, 1000 hours)

Appearance: No significant damage
Capacitance change: 20% of the initial value
D.F.(tan): 150% of the specified value
ESR: 150% of the specified value
Leakage current: The specified value

Surge Voltage (105)

Surge Voltage = Rated voltage 1.15(V)

1000 cycles (charge 30s, discharge 5m30s)
Appearance: No significant damage
Capacitance change: 20% of the initial value
D.F.(tan): 150% of the specified value
ESR: 150% of the specified value
Leakage current: The specified value

Dimensions (mm)

D	5	6.3	8	10
P	2.0	2.5	3.5	5.0
d	0.5	0.6	0.6	0.6
(L16)	1.0	(16L22)1.5	(L22)2.0

Ripple Current Correction Coefficient

Frequency (Hz)	120HzF1KHz	1KHzF10KHz	10KHzF100KHz	100KHzF500KHz
Coefficient	0.05	0.30	0.70	1.00

Explanation of Parts Numbers

Series Code	Nominal Capacitance Code	Voltage Code	Diameter Code	Color Code	Length Code	Tolerance Code	Lead Forming Type Code
E2	471 (470F)	6R3 (6.3V)	C (6.3)	H (Red)	080 (8)	M (20%)	Y ( - Long lead)

Operating Precautions

Polarity: Hyncdz capacitors are polarized and must not be reversed to prevent shortened lifespan due to increased leakage current or short circuits.
Prohibited Circuits: Not suitable for high impedance, coupling, time constant circuits, series connection for higher withstand voltage, or circuits sensitive to leakage current variations. Contact Hyncdz for specific applications like time constant circuits or series connections.
Over voltage: Exceeding rated voltage, even momentarily, can cause short circuits.
Sudden Charge and Discharge: Avoid sudden charge/discharge. Use protection circuits if rush current exceeds 10A or 10x allowable ripple current. A 1k resistor is recommended for leakage current measurement.
Operating Temperature and Ripple Current: Operating above the upper temperature limit or with excess ripple current can shorten lifespan or cause failure.
Leakage Current: May slightly increase after soldering but can self-repair with DC voltage application.
Applied Voltage: Recommended to operate below 80% of rated voltage. Peak DC and AC voltage should not exceed rated voltage.