Product Overview

The H2 Series Solid Electrolyte Aluminum Electrolytic Capacitor (E-CAP) by Hyncdz offers low ESR, high ripple current, and high voltage capabilities. Designed for a load life of 2000 hours at 105, these RoHS Compliant capacitors are suitable for a wide range of applications requiring reliable performance in demanding conditions.

Product Attributes

• Brand: Hyncdz
• Series: H2 Series
• Type: (Lead Pin Type)
• Certifications: RoHS Compliant
• Color: (Red)

Technical Specifications

Key Characteristics

• Category Temperature Range: -55 ~ +105
• Rated Voltage Range: 35 ~ 160V
• Low Temperature Characteristics: Z(-25)/Z(+20) 1.25 (100KHz), Z(-55)/Z(+20) 1.25 (Max. Impedance Ratio)
• Endurance: 2000 hours at 105 with rated voltage. Capacitance change 20%, D.F.(tan) 150% of specified value, ESR 150% of specified value, Leakage current specified value.
• Damp Heat (Steady State): 1000 hours at 60, 90%~95% RH with rated voltage. Capacitance change 20%, D.F.(tan) 150% of specified value, ESR 150% of specified value, Leakage current specified value.
• Surge Voltage: Rated voltage 1.15(V)

Operating Precautions

• Polarity: Do not reverse polarity.
• Prohibited Circuits: Avoid high impedance, coupling, time constant, series connection for higher withstand voltage, and circuits sensitive to leakage current.
• Over Voltage: Do not exceed rated voltage.
• Sudden Charge and Discharge: Restricted. A protection circuit is recommended if rush current exceeds 10A or 10x allowable ripple current.
• Operating Temperature and Ripple Current: Exceeding limits can shorten life or increase leakage current.
• Leakage Current: May increase slightly due to soldering, but self-repairs with DC voltage.
• Applied Voltage: Recommended less than 80% of rated voltage. Peak DC and AC voltage should not exceed rated voltage.

Marking

• Series and trademark
• Capacitance
• Rated voltage
• Negative polarity