Switchmode Stack Capacitor Commercial Size IHHEC SMC17JX474K631T with RoHS Compliance and Reliability

Price Negotiable

Price: Negotiable

MOQ: Negotiable

Delivery Time: Negotiable

Product Description

Product Overview

The IHHEC SMC-003-1910 is a Commercial Size Switchmode Stack Capacitor designed for use in electric equipment with voltage ratings from 50V to 1000V. These MLCCs support Lead-Free reflow soldering and are RoHS compliant, offering the same electrical characteristics and reliability as previous versions.

Product Attributes

Brand: IHHEC (a trademark of Holy Stone Enterprise Co., Ltd)
Certifications: RoHS compliant

Technical Specifications

Part Number Code Breakdown	Description
Product Code	SMC (Commercial Size Switchmode Stack Capacitor)
Stack and Size Code	(e.g., 17 for 2220 chip size)
Temperature Characteristics Code	N (NPO), X (X7R)
Nominal Capacitance (pF)	(e.g., 103 = 10,000.0 pF, 474 = 470,000.0 pF, 885 = 8,800,000.0 pF, 106 = 10,000,000.0 pF)
Capacitance Tolerance Code	F (1.00%), G (2.00%), J (5.00%), K (10.0%), M (20.0%)
Rated Voltage Code	050 (50V), 101 (100V), 251 (250V), 501 (500V), 631 (630V), 102 (1000V)
Lead Configuration Code	J, L, N, P, S (various styles and heights)
Packaging Code	T (Tape & Reel), B (Bulk), W (Waffle Pack)
Test Code	Blank (Normal Type), H (Hi Reliability Type)
Special Requirement Code	Blank (Standard), 01~99 (Customer Special Requirement)

Characteristic	Specification	Test Condition
Insulation Resistance	100Mmin.	V500V, Rated Voltage; V500V, Applied 500Vdc; Charge Time: 60sec.
Capacitance	Within The Specified Tolerance	Class (NPO): C1000pF 1MHz10% 1.00.2Vrms; C1000pF 1KHz10% 1.00.2Vrms. Class : C10uF 1KHz10% 1.00.2Vrms; C10uF 120Hz20% 0.50.2Vrms.
Q Factor	Class Char. NPO 1000; Class Char. X7R 350 (Humidity, High Temp. Load)	Class Char. Max.; Class Char. Max. 2.5% (Standard)
Withstanding Voltage	No dielectric breakdown or mechanical breakdown	V500V : 200% Rated Voltage; 500VV1000V: 150% Rated Voltage; 1000V :120% Rated Voltage. Voltage ramp up rate500v/sec for 1~5 sec.
Temperature Capacitance Coefficient	NPO: 30 ppm/; X7R: 15%	Class: -55~+125 ; Class: -55~+125
Adhesive Strength of Termination	No indication of peeling	A 10Nf (1.0Kgf) pull force applied for 10 1 second.
Strength of metal terminal	Termination not to be broken or loosened.	A static load of 10N using a pressure jig applied to the center.
Solderability	More than 90% of the terminal surface is to be soldered newly	Solder Temp: 245 5; Dip Time: 5 0.5 sec.; Solder: Lead Free.
Resistance To Soldering Heat	Appearance: No mechanical damage. Capacitance Change: NPO Within 2.5% or 0.25pF; X7R Within 10%.	Preheat: 150 10 for 60 5 sec.; Dip: Solder Temp. 260 5; Dip Time: 10 1sec.
Temperature Cycle	Appearance: No mechanical damage. Capacitance Change: NPO Within 2.5% or 0.25pF; X7R Within 7.5%.	100 cycles of temperature cycle.
Humidity	Appearance: No mechanical damage. Capacitance Change: NPO Within 5.0% or 0.5pF; X7R Within 15%. Insulation Resistance: 10Mmin.	40 2, 90 ~ 95%RH, 500 +12/0Hr.
High Temperature Load	Appearance: No mechanical damage. Capacitance Change: NPO Within 3.0% or 0.3pF; X7R Within 15%. Insulation Resistance: 10Mmin.	Applied DC voltage at max. operation temperature for 1000 +12/-0Hr.
Vibration	Appearance: No mechanical damage. Capacitance Change: NPO Within 2.5% or 0.25pF.	Amplitude of 1.5mm P-P, 10Hz to 55Hz and back to 10Hz, for 2 hours each in 3 perpendicular directions.