Product Overview

The Hyncdz E2 Series solid electrolyte aluminum electrolytic capacitors (E-CAP) are designed for high performance and reliability. They feature low ESR, high ripple current capability, and a load life of 2000 hours at 105. These capacitors are RoHS compliant and suitable for a wide range of electronic applications requiring stable and efficient power delivery.

Product Attributes

• Brand: Hyncdz
• Series: E2 Series
• Type: (Lead Pin Type)
• Certifications: RoHS Compliant

Technical Specifications

Key Features and Performance

Category Temperature Range:

-55 ~ +105

Rated Voltage Range:

2.5 ~ 25V

Endurance:

2000 hours at 105 with rated voltage. Capacitance change 20%, D.F.(tan) 150%, ESR 150%, Leakage current specified value.

Damp Heat (Steady State):

1000 hours at 60, 90%95% RH with rated voltage. Capacitance change 20%, D.F.(tan) 150%, ESR 150%, Leakage current specified value.

Surge Voltage:

Surge Voltage = Rated voltage 1.15(V). Tested for 1000 cycles at 105.

Dimensions

Operating Precautions

• Polarity: Hyncdz capacitors are polarized and must not be reverse connected.
• Prohibited Circuits: Avoid use in high impedance, coupling, time constant, or series connection circuits where leakage current is critical. Contact Hyncdz for specific applications.
• Over voltage: Do not exceed the rated voltage, even momentarily.
• Sudden charge and discharge: Avoid sudden charge/discharge. A protection circuit is recommended for rush currents exceeding 10A or 10x allowable ripple current.
• Operating temperature and ripple current: Exceeding temperature limits or ripple current can shorten life and increase leakage.
• Leakage current: May slightly increase after soldering but can self-repair with applied DC voltage.
• Applied voltage: Recommended to operate below 80% of rated voltage for reliability. Peak DC and AC voltage should not exceed rated voltage.

Marking

Each unit is marked with series, trademark, capacitance, rated voltage, and negative polarity.