Durable Electric Components Multilayer Ceramic Chip Capacitors IHHEC C1812X103K202TFP RoHS Compliant

Price Negotiable

Price: Negotiable

MOQ: Negotiable

Delivery Time: Negotiable

Product Description

Product Overview

The HVC-019-2005 series Multilayer Ceramic Chip Capacitors (MLCC) are designed for electric equipment operating at voltages ranging from 1.5KV to 5KV. These MLCCs support Lead-Free wave and reflow soldering, maintaining their electrical characteristics and reliability. The product is compliant with RoHS & HF standards.

Product Attributes

Brand: IHHEC (a trademark of Holy Stone Enterprise Co., Ltd)
Certifications: RoHS & HF compliant

Technical Specifications

Item	Specification	Test Condition
Visual	No abnormal exterior appearance	Visual inspection
Dimension	See Page 2	Visual inspection
Insulation Resistance	10,000Mmin.	V500V, Applied 500Vdc Charge Time60sec. Is applied less than 50mA current.
Capacitance	Within The Specified Tolerance	Class
D.F.	X7R: 2.5% max.	Class Char. Maximum
Withstanding Voltage	No dielectric breakdown or mechanical breakdown	1000V :120% Rated Voltage Voltage ramp up rate500v/sec for 1~5 sec. charge/discharge Current is less than 50mA. Withstanding voltage testing requires immersion of the element in a isolation fluid prevent arcing on the chip surface, at voltage over 1000Vdc.
Temperature Capacitance Coefficient	15%	Class : X7R -55 ~+125 C1:Capacitance at standard temperature(25 ) C2: Capacitance at test temperature (T2) (C2-C1)/C1 100%
Adhesive Strength of Termination	0603----5N( 0.5 Kgf) 0603----10N(1.0 Kgf)	Pull force shall be applied for 10 1 second.
Resistance to Flexure of Substrate	No mechanical damage shall be occur.	Bending shall be applied to the 1.0 mm with 1.0 mm/sec. The duration of the applied forces shall be 5 1sec
Solderability	More than 90% of the terminal surface is to be soldered newly, so metal part does not come out or dissolve .	Solder Temperature : 245 5 Dip Time : 5 0.5 sec. Immersing Speed : 2510% mm/s Solder : Lead Free Solder Flux :Rosin Preheat : At 80~120 for 10~30sec.
Resistance To Soldering Heat	Cap. Change Class X7R Within 10% D.F. Class To satisfy the specified initial value Insulation Resistance To satisfy the specified initial value Withstand Voltage To satisfy the specified initial value	Preheat : At 150 10 For 60~120sec. Dip : Solder Temperature of 260 5 Dip Time : 10 1sec. Immersing Speed : 2510% mm/s Flux :Rosin Measure at room temperature after cooling for Class: 48 4 Hours
Temperature Cycle	Cap. Change Class X7R Within 7.5% D.F. Class To satisfy the specified initial value Insulation Resistance To satisfy the specified initial value	Capacitor shall be subjected to five cycles of the temperature cycle as following: Measure at room temperature after cooling for Class :48 4 Hrs Solder the capacitor on P.C. board shown in Fig 2. before testing.
Humidity	Cap. Change Class X7R Within 15% D.F. Class Char. Maximum X7R: 5.0% max. Insulation Resistance 1,000Mmin.	Temperature : 40 2 Relative Humidity : 90 ~ 95%RH Test Time : 500 +12/-0Hr Measure at room temperature after cooling for Class : 48 4Hrs Solder the capacitor on P.C. board shown in Fig 2. before testing.
High Temperature Load	Cap. Change Class X7R Within 15% D.F. Class Char. maximum X7R: 5.0% max. Insulation Resistance 1,000Mmin.	Class capacitors applied DC voltage (following table) is applied for one hour at maximum operation temperature 3 then shall be set for 484 hours at room temperature and the initial measurement shall be conducted. Voltage Conditioning : 100% Rated Voltage meet MIL-PRF-49467(Group A/B) Current Applied : 50 mA Max. Measure at room temperature after cooling for Class: 48 4 Hours
Vibration	Cap. Change Class X7R Within 7.5% D.F. Class To satisfy the specified initial value Insulation Resistance To satisfy the specified initial value	Solder the capacitor on P.C. Board shown in Fig 2. before testing. Vibrate the capacitor with amplitude of 1.5mm P-P changing the frequencies from 10Hz to 55Hz and back to 10Hz in about 1 min. Repeat this for 2 hours each in 3perpendicular directions.

Part Number Code Example

C 1812 X 103 K 202 T

(1)	(2)	(3)	(4)	(5)	(6)	(7)
Product Code	Chip Size Code	Temperature Characteristics Code	Capacitance unit	Capacitance Tolerance Code	Rated Voltage Code	Tapping Code
C	1812 (4.60 3.20 (.181 .125))	X (X7R, -55~+125, 15%)	103 (10,000.0 pF)	K ( 10.0 %)	202 (2,000 Vdc)	T (Tape & Reel)