Multilayer Ceramic Chip Capacitors IHHEC C1210X223K152TGF with Stable Capacitance and RoHS Certification

Price Negotiable

Price: Negotiable

MOQ: Negotiable

Delivery Time: Negotiable

Product Description

Product Overview

Multilayer Ceramic Chip Capacitors (MLCC) for electric equipment with voltages ranging from 1.5KV to 5KV. These MLCCs support Lead-Free wave and reflow soldering, maintaining their electrical characteristics and reliability. The product is compliant with RoHS & HF.

Product Attributes

Brand: IHHEC (a trademark of Holy Stone Enterprise Co., Ltd)
Certifications: RoHS & HF

Technical Specifications

Item	Specification	Test Condition
Visual	No abnormal exterior appearance	Visual inspection
Dimension	See Page 2	Visual inspection
Insulation Resistance	10,000Mmin.	V500V, Applied 500Vdc Charge Time60sec. Is applied less than 50mA current.
Capacitance	Class Within The Specified Tolerance
D.F.	Class Char. Maximum X7R: 2.5% max.
Withstanding Voltage	No dielectric breakdown or mechanical breakdown	1000V :120% Rated Voltage Voltage ramp up rate500v/sec for 1~5 sec. charge/discharge Current is less than 50mA. Withstanding voltage testing requires immersion of the element in a isolation fluid prevent arcing on the chip surface, at voltage over 1000Vdc.
Temperature Capacitance Coefficient	Class Char. Temp. Range Cap. Change(%) Class : (C2-C1)/C1 100% C1:Capacitance at standard temperature(25) C2: Capacitance at test temperature (T2) X7R -55 ~+125 15%
Adhesive Strength of Termination	No indication of peeling shall occur on the terminal electrode. Pull force shall be applied for 10 1 second.	0603----5N( 0.5 Kgf) 0603----10N(1.0 Kgf)
Resistance to Flexure of Substrate	Appear-ance No mechanical damage shall occur. Bending shall be applied to the 1.0 mm with 1.0 mm/sec. The duration of the applied forces shall be 5 1sec	C-Meter Capacitance Change Char. Cap. Change X7R 12.5% Class Frequency Voltage X7R 1KHz10% 1.00.2Vrms
Solderability	More than 90% of the terminal surface is to be soldered newly, so metal part does not come out or dissolve .	Solder Temperature : 245 5 Dip Time : 5 0.5 sec. Immersing Speed : 2510% mm/s Solder : Lead Free Solder Flux :Rosin Preheat : At 80~120 for 10~30sec.
Resistance To Soldering Heat	Appear-ance No mechanical damage shall occur. Class capacitor shall be set for 484 hours at room temperature after one hour heat treatment at 150 +0/-10 before initial measure.	Preheat : At 150 10 For 60~120sec. Dip : Solder Temperature of 260 5 Dip Time : 10 1sec. Immersing Speed : 2510% mm/s Flux :Rosin Measure at room temperature after cooling for Class: 48 4 Hours
Capacitance Change (Resistance to Soldering Heat)	Class X7R Within 10%
D.F. (Resistance to Soldering Heat)	Class To satisfy the specified initial value
Insulation Resistance (Resistance to Soldering Heat)	To satisfy the specified initial value
Withstand Voltage (Resistance to Soldering Heat)	To satisfy the specified initial value
Temperature Cycle	Appear-ance No mechanical damage shall occur Class capacitor shall be set for 48 4 hours at room temperature after one hour heat treatment at 150 +0/-10 before initial measure. Capacitor shall be subjected to five cycles of the temperature cycle as following: Measure at room temperature after cooling for Class :48 4Hrs Solder the capacitor on P.C. board shown in Fig 2. before testing.	Step Temp.() Time(min) 1 Min Rated Temp. +0/-3 30 2 25 3 3 Max Rated Temp. +3/-0 30 4 25 3
Capacitance Change (Temperature Cycle)	Class X7R Within 7.5%
D.F. (Temperature Cycle)	Class To satisfy the specified initial value
Insulation Resistance (Temperature Cycle)	To satisfy the specified initial value
Humidity	Appear-ance No mechanical damage shall occur Class capacitor shall be set for 48 4 hours at room temperature after one hour heat treatment at 150+0/-10 before initial measure. Solder the capacitor on P.C. board shown in Fig 2. before testing. Measure at room temperature after cooling for Class :48 4Hrs	Temperature : 40 2 Relative Humidity : 90 ~ 95%RH Test Time : 500 +12/-0Hr
Capacitance Change (Humidity)	Class X7R Within 15%
D.F. (Humidity)	Class Char. Maximum X7R: 5.0% max.
Insulation Resistance (Humidity)	1,000Mmin.
High Temperature Load	Appear-ance No mechanical damage shall occur Class capacitors applied DC voltage (following table) is applied for one hour at maximum operation temperature 3 then shall be set for 484 hours at room temperature and the initial measurement shall be conducted. Voltage Conditioning : 100% Rated Voltage meet MIL-PRF-49467(Group A/B) Current Applied : 50 mA Max. Measure at room temperature after cooling for Class: 48 4 Hours
Capacitance Change (High Temperature Load)	Class X7R Within 15%
D.F. (High Temperature Load)	Class Char. maximum X7R: 5.0% max.
Insulation Resistance (High Temperature Load)	1,000Mmin.
Vibration	Appear-ance No mechanical damage shall occur Solder the capacitor on P.C. Board shown in Fig 2. before testing. Vibrate the capacitor with amplitude of 1.5mm P-P changing the frequencies from 10Hz to 55Hz and back to 10Hz in about 1 min. Repeat this for 2 hours each in 3perpendicular directions.
Capacitance Change (Vibration)	Class X7R Within 7.5%
D.F. (Vibration)	Class To satisfy the specified initial value
Insulation Resistance (Vibration)	To satisfy the specified initial value
Dimensions (1210)	L: 3.20 0.30mm, W: 2.50 0.20mm, T: 2.40 0.20mm, B (min): 1.60mm, BW (min): 0.30mm
Packing (Tape & Reel)	1210 T1.25mm: 3,000 pcs/Reel (Plastic Tape)
Cover Tape Reel Off Force	5 gf Peel-Off Force 70 gf