Multilayer Ceramic Chip Capacitors IHHEC C0805X221K102T compatible with lead free soldering processes

Price Negotiable

Price: Negotiable

MOQ: Negotiable

Delivery Time: Negotiable

Product Description

Multilayer Ceramic Chip Capacitors (MLCC) HVC-008-0807

This specification applies to Multilayer Ceramic Chip Capacitors (MLCC) designed for use in electric equipment with voltage ratings from 100V to 5KV. These MLCCs are compatible with Lead-Free wave and reflow soldering, maintaining their electrical characteristics and reliability. This product is RoHS compliant.

Product Attributes

Brand: Not specified
Origin: Not specified
Material: Ceramic
Color: Not specified
Certifications: RoHS compliant

Technical Specifications

Part Number Code	Product Code	Chip Size (mm)	Temperature Characteristics	Nominal Capacitance (pF)	Capacitance Tolerance	Rated Voltage (Vdc)	Tapping Code
C0805X472K501T	C (MLCC)	0805 (2.00x1.25)	X7R	472 (4,700.0)	K ( 10.0 %)	501 (500)	T (Tape & Reel)

Class	Characteristic	Temperature Range	Reference Temp.
	NPO	-55~+125	25
	SL	-25~+125	25
	X7R	-55~+125	25
	X5R	-55~+85	25
	X6S	-55~+105	25
	Y5V	-30~+85	25
	Z5U	+10~+85	25
	Y5U	-30~+85	25
Other	Not specified	-25~+85	25

Item	Specification	Test Condition
Visual	No abnormal exterior appearance	Visual inspection
Dimension	See Page 3	Visual inspection
Insulation Resistance	10,000Mor 500/C (Whichever Is Smaller)	V500V, Rated Voltage; V500V, Applied 500Vdc; Charge Time60sec.
Capacitance	Within The Specified Tolerance	Class : NPO/SL; Class : X7R/X5R/X7E
Tan	Class (NPO/SL): More Than 30pF : Q 1000; 30pF & Below: Q 400; Max X7R: 2.5%; Class (Z5U/Y5U): 4.0%	C 20C (C : Capacitance , pF)
Withstanding Voltage	No dielectric breakdown or mechanical breakdown	V500V : 200% Rated Voltage; 500VV1000V: 150% Rated Voltage; 1000V :120% Rated Voltage for 1~5 sec. Current is limited to less than 50mA.
Temperature Capacitance Coefficient	NPO: 30 ppm/; SL: +350~-1000ppm; X7R: 15%; Y5U: +22% ~-56%; Z5U: +22% ~-56%	Class : [C2-C1/C1(T2-T1)] 100%; Class : (C2-C1)/C1 100%; T1: 25; T2: Test temperature; C1:Capacitance at 25; C2: Capacitance at test temperature (T2)
Adhesive Strength of Termination	No indication of peeling shall occur on the terminal electrode.	A 5Nf ( 0.5Kgf) pull force shall be applied for 10 1 second.
Resistance to Flexure of Substrate	NPO/SL: 5.0%; X7R: 12.5%; Y5U/Z5U: 30.0%	Bending shall be applied to the 1.0 mm with 1.0 mm/sec.
Solderability	More than 90% of the terminal surface is to be soldered newly, so metal part does not come out or dissolve.	Solder Temperature : 245 5; Dip Time : 5 0.5 sec.; Immersing Speed : 2510% mm/s; Solder : H63A; Flux :Rosin; Preheat : At 80~120 for 10~30sec.
Resistance To Soldering Heat	Cap. Change: Class (NPO/SL): Within 2.5% or 0.25pF (whichever is larger of initial value); X7R: Within 10%; Class Z5U/Y5U: Within 20%	Preheat : At 150 10 For 60~120sec.; Dip : Solder Temperature of 260 5; Dip Time : 10 1sec.; Immersing Speed : 2510% mm/s; Solder : H63A; Flux :Rosin; Measure at room temperature after cooling for Class: 24 2 Hours; Class: 48 4 Hours
Temperature Cycle	Cap. Change: Class (NPO/SL): Within 5.0% or 0.5pF (whichever is larger of initial value); X7R: Within 15%; Class Z5U/Y5U: Within 30%	Capacitor shall be subjected to five cycles of the temperature cycle as following: Step Temp.() Time(min) 1 Min Rated Temp. +0/-3 30 2 25 3 3 Max Rated Temp. +3/-0 30 4 25 3
Humidity	Cap. Change: Class (NPO/SL): Within 3.0% or 0.3pF (whichever is larger); X7R: Within 15%; Class Z5U/Y5U: Within 30%	Temperature : 40 2; Relative Humidity : 90 ~ 95%RH; Test Time : 500 +12/-0Hr; Measure at room temperature after cooling for Class :24 2Hrs Class :48 4Hrs
High Temperature Load (Life Test)	Cap. Change: Class (NPO/SL): Within 2.5% or 0.25pF (whichever is larger); X7R: Within 7.5%; Class Z5U/Y5U: Within 20%	Temperature : max. operation temperature; Test Time : 1000 +12/-0Hr; Applied Voltage : 120% rated voltage (for capacitance more than 1.0uF in 1210/100V); Current Applied : 50 mA Max.
Vibration	Insulation Resistance: To satisfy the specified initial value	Vibrate the capacitor with amplitude of 1.5mm P-P changing the frequencies from 10Hz to 55Hz and back to 10Hz in about 1 min. Repeat this for 2 hours each in 3 perpendicular directions.