Multilayer Ceramic Chip Capacitor IHHEC C1210X103K202TEF MLCC with 10 percent capacitance tolerance K

Price Negotiable

Price: Negotiable

MOQ: Negotiable

Delivery Time: Negotiable

Product Description

Product Overview

This specification applies to Multilayer Ceramic Chip Capacitors (MLCC) designed for electric equipment operating within a voltage range of 2KV to 5KV. These MLCCs are compatible with Lead-Free wave and reflow soldering, maintaining their electrical characteristics and reliability. The product is compliant with RoHS & HF standards.

Product Attributes

Product Type: Multilayer Ceramic Chip Capacitor (MLCC)
Series: HVC-017-1810
Certifications: RoHS & HF compliant

Technical Specifications

Item	Specification	Test Condition
Scope	MLCC for electric equipment, voltage 2KV to 5KV. Supports Lead-Free wave and reflow soldering.
Class
Characteristic	X7R
Nominal Capacitance Tolerance	K ( 10.0 %)
Operation Temperature Range	-55 ~ +125	Reference Temp. 25
Storage Condition	Temperature: 5 to 40, Relative Humidity: 20 to 70 %	Storage Time: 12 months max.
Insulation Resistance	10,000Mmin.	V500V, Applied 500Vdc, Charge Time60sec.
Capacitance	Within The Specified Tolerance
Tan	X7R: 2.5% max.
Withstanding Voltage	No dielectric breakdown or mechanical breakdown	1000V :120% Rated Voltage, Voltage ramp up rate500v/sec for 1~5 sec. charge/discharge Current is less than 50mA. Withstanding voltage testing requires immersion of the element in a isolation fluid prevent arcing on the chip surface, at voltage over 1000Vdc.
Temperature Capacitance Coefficient	X7R: 15%	Class : , Temp. Range -55 ~+125 , C1:Capacitance at 25, C2: Capacitance at test temperature (T2)
Adhesive Strength of Termination	0603----10N(1.0 Kgf)	Pull force shall be applied for 10 1 second.
Resistance to Flexure of Substrate	No mechanical damage shall be occur.	Bending shall be applied to the 1.0 mm with 1.0 mm/sec. The duration of the applied forces shall be 5 1sec
Solderability	More than 90% of the terminal surface is to be soldered newly, so metal part does not come out or dissolve.	Solder Temperature : 245 5, Dip Time : 5 0.5 sec., Immersing Speed : 2510% mm/s, Solder : Lead Free Solder, Flux :Rosin, Preheat : At 80~120 for 10~30sec.
Resistance To Soldering Heat	Capacitance Change: X7R Within 10%, Tan : To satisfy the specified initial value, Insulation Resistance: To satisfy the specified initial value, Withstand Voltage: To satisfy the specified initial value	Preheat : At 150 10 For 60~120sec., Dip : Solder Temperature of 260 5, Dip Time : 10 1sec., Immersing Speed : 2510% mm/s, Flux :Rosin, Measure at room temperature after cooling for 48 4 Hours
Temperature Cycle	Capacitance Change: X7R Within 7.5%, Tan : To satisfy the specified initial value, Insulation Resistance: To satisfy the specified initial value	Five cycles of temperature cycle. Measure at room temperature after cooling for 48 4 Hrs. Solder the capacitor on P.C. board shown in Fig 2. before testing.
Humidity	Capacitance Change: X7R Within 15%, Tan : X7R: 5.0% max., Insulation Resistance: 1,000Mmin.	Temperature : 40 2, Relative Humidity : 90 ~ 95%RH, Test Time : 500 +12/-0Hr. Measure at room temperature after cooling for 48 4Hrs. Solder the capacitor on P.C. board shown in Fig 2. before testing.
High Temperature Load	Capacitance Change: X7R Within 15%, Tan : X7R: 5.0% max., Insulation Resistance: 1,000Mmin.	Voltage Conditioning : 100% Rated Voltage meet MIL-PRF-49467(Group A/B), Current Applied : 50 mA Max. Measure at room temperature after cooling for 48 4 Hours
Vibration	Capacitance Change: X7R Within 7.5%, Tan : To satisfy the specified initial value, Insulation Resistance: To satisfy the specified initial value	Vibrate the capacitor with amplitude of 1.5mm P-P changing the frequencies from 10Hz to 55Hz and back to 10Hz in about 1 min. Repeat this for 2 hours each in 3 perpendicular directions. Solder the capacitor on P.C. Board shown in Fig 2. before testing.
Dimensions (1210)	L: 3.200.30mm, W: 2.500.20mm, T: 1.600.20mm, B (min): 1.60mm, BW (min): 0.30mm
Part Number Code Example	C1210X103K202T	C: Product Code, 1210: Chip Size, X: Temperature Characteristics Code, 103: Nominal Capacitance (10,000pF), K: Capacitance Tolerance (10.0%), 202: Rated Voltage (2000Vdc), T: Tapping Code (Tape & Reel)