Durable alloy patch resistor JIERR RE2512F3R004 rated power 3W suitable for automotive electronics
Product Overview
High-power alloy patch resistors designed for current sensing applications. Featuring ultra-low resistance values, excellent temperature coefficient characteristics, and high power ratings up to 3W. Compliant with AEC-Q200 and RoHS/REACH certifications, these resistors are ideal for demanding automotive electronics, power supplies, and consumer electronics.
Product Attributes
- Type: Alloy Resistor, Patch Resistor
- Certifications: RoHS, REACH, AEC-Q200
- Material: MnCu, CuNi, Kama (specific to resistance range)
Technical Specifications
| Size | Type | Rated Power (W) | Resistance Tolerance | Resistance Range (m) | Material | TCR (ppm/) | Operating Temperature Range | Insulation Resistance |
| 2512 | Large Electrode | 2W/3W | F:1%, G:2%, J:5% | <0.45m (R000) | MnCu | 350ppm/ | -55~+170 | 100M |
| 2512 | Large Electrode | 2W/3W | F:1%, G:2%, J:5% | 0.5mR<1m (R0005 to R0009) | MnCu | 350ppm/ | ||
| 2512 | Large Electrode | 2W/3W | F:1%, G:2%, J:5% | 1mR4m (R001 to R004) | MnCu | 50ppm/ | ||
| 2512 | Small Electrode | 3W/4W | F:1%, G:2%, J:5% | 1mR1.5m (R001 to 1R5m) | MnCu | 350ppm/ | ||
| 2512 | Small Electrode | 3W/4W | F:1%, G:2%, J:5% | 2mR20m (R002 to R020) | MnCu | 50ppm/ | ||
| 2512 | Small Electrode | 2W/3W | F:1%, G:2%, J:5% | 20mR150m (R020 to R150) | MnCu | 50ppm/ | -55~+170 | 100M |
| 2512 | Small Electrode | 2W/3W | F:1%, G:2%, J:5% | 150mR220m (R150 to R220) | CuNi | 50ppm/ | -55~+170 | 100M |
| 2512 | Small Electrode | 2W | F:1%, G:2%, J:5% | 220mR400m (R220 to R400) | CuNi | 50ppm/ | -55~+170 | 100M |
| 2512 | Small Electrode | 2W | F:1%, G:2%, J:5% | 400mR500m (R400 to R500) | Kama | 50ppm/ | -55~+170 | 100M |
| 1206 | N/A | 1W | F:1%, G:2%, J:5% | N/A | N/A | N/A | N/A | N/A |
| 0805 | N/A | 1/2W | F:1%, G:2%, J:5% | N/A | N/A | N/A | N/A | N/A |
Product Features & Applications
Features: High power rating up to 3 watts, ultra-low resistance values with excellent temperature coefficient characteristics, AEC-Q200 compliance, RoHS and REACH certified.
Applications: Automotive electronics, current sensors, power supplies, battery chargers, mobile phones, computers, and consumer electronics.
Product Dimensions
| Size | Type | Length L(mm) | Width W(mm) | Thickness T(mm) | Electrode Width E(mm) |
| 2512 | Large Electrode | 6.40.2 | 3.20.2 | 0.80.08 | 2.20.2 |
| 2512 | Small Electrode | 6.40.2 | 3.20.2 | 0.80.08 | 1.00.2 |
Part Numbering Example
RE2512F3R010(L) = RE Series, 2512 Size, 3W, 1% Tolerance, 10m Resistance
Marking Code Examples
R50m=0.5m, R001=1m, R010=10m, R200=200m, R500=500m
Power Derating & Rated Current
Maximum load power should be reduced when operating in ambient temperatures above 70C, as per the power derating curve. Rated current (I) is calculated by I = P/R, where P is rated power and R is resistance. If the calculated current exceeds the maximum working current for the type, the maximum working current applies.
Packaging & Taping Specifications
Refer to the provided dimensions for Emboss tape packaging (2512, 1206, 0805) and reel dimensions. Peel force of top cover tape: 0.1N-0.7N for paper, 0.3N-1N for plastic.
Soldering Recommendations
Recommended PCB pad dimensions and soldering profiles (IR Reflow and Wave Soldering) are provided. Recommended solder paste: 96.5Sn/3.0Ag/0.5Cu.
Performance Reliability Test Methods
| Test Item | Test Method | Conditions | Specification |
| Short Time Overload | IEC60115-1 4.13 | 5.0 times rated power for 5s, rest 5s. R% 1% | 1% |
| Temperature Coefficient | IEC60115-1 4.8 | Refer to Spec. | Refer to Spec. |
| Temperature Cycling | JESD22 Method JA-104 | 1000 Cycles (-55 to +125). Measure 244h after test. R% 1% | |
| High Temperature Exposure | MIL-STD-202 Method 108 | 1000 hrs @ 125. Measure 244h after test. R% 1% | |
| Low Temperature Operation | IEC60115-1 4.23.4 | 45 min @ -55. Measure after test. R% 1% | |
| Biased Humidity | MIL-STD-202 METHOD 103 | 1000 hours 85/85%RH, 10% operating power. Measure 244h after test. R% 1% | 1% |
| Solderability | J-STD-002B test B | Dip in flux, then solder bath at 2455 for 2-3s. Min 95% coverage. | Min 95% coverage |
| Operational Life | MIL-STD-202 METHOD 108 | 702, rated current 1.5h on, 0.5h off, repeated for 1000+48/-0h. R% 1% | 1% |
| Resistance to Vibration | MIL-STD-202 METHOD 204 | 5g's for 20min, 12 cycles, 10-2000Hz. R% 1% | 1% |
| Resistance to Solder Heat | IEC60115-1 4.18 | Dip in flux, then solder bath at 2605 for 101s. R% 1% | 1% |
| Terminal Bending | AEC-Q200-005 | Min 2mm deflection, 60s. R% 1% | 1% |
| Mechanical Shock | MIL-STD-202 METHOD 213 | 100g's, 6ms half sine shock pulse. R% 1% | 1% |
| Terminal Strength | AEC-Q200-006 | Applied 17.7N (1.8Kg) for 601s. R% 1% | 1% |
| Thermal Shock | MIL-STD-202 METHOD 107 | -55/+125, 300 cycles, 15 min dwell time. R% 1% | 1% |
| Flammability | UL-94 | V-0 or V-1 acceptable. Electrical test not required. | V-0 or V-1 |
| ESD Test | AEC-Q200-002 | 2KV, 2 times/1s. R% 1% | 1% |
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.