Polypropylene film capacitor Jimson MPP334K630D01 featuring fire retardant epoxy coating and RoHS 2.0 compliance
Price:
Negotiable
MOQ:
Negotiable
Delivery Time:
Negotiable
Product Description
Product Overview
The JIMSON (JS) MPP Capacitor is a high-stability, low-loss capacitor designed for general resonance circuits, DC pulse, high-frequency, and low-current applications. It features a non-inductive, self-healing construction with very small inherent temperature rise, making it ideal for demanding electronic circuits, including S-shaping correction in color TV sets. Manufactured by (JIMSON ELECTRONICS (XIAMEN) CO.,LTD.), these capacitors are compliant with RoHS 2.0 environmental directives.
Product Attributes
- Brand: JIMSON (JS)
- Manufacturer: (JIMSON ELECTRONICS (XIAMEN) CO.,LTD.)
- Origin: Xiamen, China
- Dielectric Material: Polypropylene film
- Electrodes: Vacuum evaporated metal
- Coating: Epoxy resin (fire retardant on request)
- Leads: Radial leads of tinned wire/insulation flexible wire
- Terminal Contact: Electrically welded (arc spot welding)
- Color: Brown
- Certifications: RoHS 2.0 Compliant
Technical Specifications
| Specification | Description / Value | Test Conditions |
|---|---|---|
| Capacitance Range | 0.0022uF ~ 1.0uF | Measuring frequency: 1kHz10%; Measuring voltage: 1Vrms.max. |
| Capacitance Tolerance | J=5%, K=10% | |
| Rated Voltage | 630VDC, 63VDC | |
| Voltage Proof | No permanent breakdown or flashover | 1.6*UR Unit:VDC (5 S at 20) |
| Dissipation Factor (DF) | 0.1% | at 20, 1KHz; Measuring frequency: 1kHz10%; Measuring voltage: 1Vrms.max. |
| Insulation Resistance (IR) | C0.33uF: IR30000M C > 0.33uF: IR*C5000S | measured at rated voltage or less than 100VDC, 1 minute at 20 and RH65% |
| Endurance | C/C5%; DF0.4%; IR50% of specified value | 1000 hours with 125% of rated voltage at 85. |
| Climatic Catalogue | 40/85/21 | |
| Solderability | Solder should cover at least 75% of the circumference of the lead | Solder bath: 2355, bath time: 2.00.5 sec, speed: 256 mm/sec, depth: 1.5+0.5/-0mm from the bottom of the body |
| Heat Shock | C/C5%, DF1.2*specified value. No visible damage after test. | Solder bath: 2605, bath time: 5.00.5 sec, speed: 256 mm/sec, depth: 1.5+0.5/-0mm from the bottom of the body |
| Lead Tensile Strength | No visible damage | Pull: 2.2 LBS, time: 5 sec |
| Lead Bending Strength | No visible damage | Load of lead: 1.1 LBS (The body of capacitor is bent 90 degrees and returned to its original position) |
| Vibration | No visible damage | Frequency cycle: 10Hz to 55Hz and then 10Hz, Amplitude: 1.5mm in three directions, Time: 2 hours each direction (total 6 hours) |
| Reference Standard | IEC 60384-16, GB10190 | |
| Construction | Dielectric: Polypropylene film; Electrodes: Vacuum evaporated metal; Coating: Epoxy resin; Leads: Radial tinned wire/insulation flexible wire; Terminal contact: Electrically welded | |
| Features | High stability of capacitance and DF vs. temperature and frequency; Low DF and high IR; Non-inductive and self-healing; Very small inherent temperature rise. | |
| Application | General resonance circuit; DC pulse, high frequency and low current circuit; S-shaping correction of color TV set. | |
| Marking (Individual Capacitor) | Rated capacitance, Rated voltage, Capacitance tolerance, Manufacturer's symbol (JIMSON (JS)) | Printing method: UV ink or laser engraving |
| Marking (Package) | Product model, rated capacitance and voltage, date of manufacture, location of manufacture, manufacturer's name | |
| Capacitance Unit Conversion | 1F=1,000mF=1,000,000uF=1,000,000,000nF=1,000,000,000,000pF | |
| Capacitance Tolerance Symbols | F=1%, G=2%, J=5%, K=10%, M=20%, N=30% | |
| Dissipation Factor Measurement | Measured at 20 and 1kHz as the standard condition. | |
| Insulation Resistance Measurement | T=20 and RH65%. For higher capacitance values, measured as a time constant (IR*C in MF). | |
| Self-healing | Metallized film capacitors can withstand a break-through without a permanent short circuit. | |
| High Temperature Test | Capacitance drift: +5% max of initial value; DF: | +85, after thermal stability |
| Low Temperature Test | Capacitance drift: -5% max of initial value; DF: | -40, after thermal stability |
| Humidity Test (Steady State) | Capacitance drift: +3% max of initial value; DF: 50% of initial value. | 403, 90-95% RH for 964% hrs, then 16 hrs at room conditions. |
| Soldering Suggestion (Max Temp) | Pre-heating: 105 for 1 min; Soldering: 270 for 4 sec. | |
| Salt Fog Test Note | Perform after wave peak welding. | |
| Storage Environment | Temperature 30, Humidity 70% | MBB not open: 24 months storage period. Avoid atmospheric contaminants (HCl, H2S, H2SO4) and high temperature/humidity. |
| Model Example: 222J630D01 | Capacitance: 0.0022uF, Tolerance: J (5%), Voltage: 630VDC | W MAX: 13.0mm, H MAX: 8.0mm, T MAX: 5.0mm, P: 10.0mm, D: 0.6mm, L: 25.0mm |
| Model Example: 103J630D01 | Capacitance: 0.01uF, Tolerance: J (5%), Voltage: 630VDC | W MAX: 12.0mm, H MAX: 10.0mm, T MAX: 6.8mm, P: 10.0mm, D: 0.6mm, L: 25.0mm |
| Model Example: 223J630D01 | Capacitance: 0.022uF, Tolerance: J (5%), Voltage: 630VDC | W MAX: 13.0mm, H MAX: 10.0mm, T MAX: 6.0mm, P: 10.0mm, D: 0.6mm, L: 25.0mm |
| Model Example: 273J630D01 | Capacitance: 0.027uF, Tolerance: J (5%), Voltage: 630VDC | W MAX: 13.0mm, H MAX: 12.0mm, T MAX: 7.0mm, P: 10.0mm, D: 0.6mm, L: 25.0mm |
| Model Example: 104K630D02 | Capacitance: 0.1uF, Tolerance: K (10%), Voltage: 630VDC | W MAX: 13.0mm, H MAX: 11.0mm, T MAX: 8.0mm, P: 10.0mm, D: 0.6mm, L: 25.0mm |
| Model Example: 104K630D03 | Capacitance: 0.1uF, Tolerance: K (10%), Voltage: 630VDC | W MAX: 18.0mm, H MAX: 12.5mm, T MAX: 7.5mm, P: 15.0mm, D: 0.8mm, L: 25.0mm |
| Model Example: 224J630VDC | Capacitance: 0.22uF, Tolerance: J (5%), Voltage: 630VDC | W MAX: 18.0mm, H MAX: 14.5mm, T MAX: 9.0mm, P: 15.0mm, D: 0.8mm, L: 25.0mm |
| Model Example: 105K630D04 | Capacitance: 1.0uF, Tolerance: K (10%), Voltage: 630VDC | W MAX: 18.0mm, H MAX: 15.0mm, T MAX: 7.5mm, P: 15.0mm, D: 0.8mm, L: 25.0mm |
| Model Example: 334K630D01 | Capacitance: 0.33uF, Tolerance: K (10%), Voltage: 630VDC | W MAX: 23.0mm, H MAX: 12.0mm, T MAX: 7.0mm, P: 20.0mm, D: 0.8mm, L: 25.0mm |
| Model Example: 564K630D01 | Capacitance: 0.56uF, Tolerance: K (10%), Voltage: 630VDC | W MAX: 23.0mm, H MAX: 14.0mm, T MAX: 9.0mm, P: 20.0mm, D: 0.8mm, L: 25.0mm |
| Model Example: 684K630D05 | Capacitance: 0.68uF, Tolerance: K (10%), Voltage: 630VDC | W MAX: 23.0mm, H MAX: 15.0mm, T MAX: 9.0mm, P: 20.0mm, D: 0.8mm, L: 25.0mm |
| Model Example: 474J630D06 | Capacitance: 0.47uF, Tolerance: J (5%), Voltage: 630VDC | W MAX: 26.5mm, H MAX: 21.5mm, T MAX: 12.0mm, P: 22.5mm, D: 0.8mm, L: 25.0mm |
| Model Example: 105J063D01 | Capacitance: 1.0uF, Tolerance: J (5%), Voltage: 63VDC | W MAX: 18.0mm, H MAX: 16.0mm, T MAX: 9.0mm, P: 15.0mm, D: 0.8mm, L: 3.8mm |
| Model Example: 472J630D02 | Capacitance: 0.0047uF, Tolerance: J (5%), Voltage: 630VDC | W MAX: 10.0mm, H MAX: 9.0mm, T MAX: 5.0mm, P: 7.5mm, D: 0.6mm, L: 3.8mm |
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
Beijing Silk Road Enterprise Management Services Co., Ltd.
Location
16 Floor, Unit B, Jiatai International Mansion, No 41, Dongsihuan Zhong Road, Chaoyang District, Beijing
Contact Person
Sellina