Epoxy resin sealed capacitor Jimson MPC103K2000D02 featuring radial tinned wire leads for connections

Price Negotiable

Price: Negotiable

MOQ: Negotiable

Delivery Time: Negotiable

Product Description

Product Overview

The JIMSON (JS) MPC Series Capacitor is a non-inductive, self-healing capacitor designed for demanding electronic applications. Featuring a polypropylene film dielectric and vacuum-evaporated metal electrodes, these capacitors offer high moisture resistance and excellent physical and environmental characteristics. They are ideal for filter and noise suppression circuits, pulse, logic, and timing circuits, as well as DC-blocking, by-passing, and signal coupling in communication equipment.

Product Attributes

Brand: JIMSON (JS)
Customer: (LICHIP)
Series: MPC
Dielectric: Polypropylene film
Electrodes: Vacuum evaporated metal
Encapsulation: Reinforced flame retardant plastic case sealed with epoxy resin (UL94V-0)
Leads: Radial leads of tinned wire/insulation flexible wire
Terminal Connection: Electrically welded (arc spot welding)
Marking Method: UV ink or laser engraving
Certifications: RoHS Compliant (RoHS 2.0)

Technical Specifications

Specification	Description	Test Conditions
Rated Capacitance	0.001uF, 0.01uF	Measuring frequency: 1kHz10%, Measuring voltage: 1Vrms max.
Capacitance Tolerance	J = 5%, K = 10%
Rated Voltage	2000VDC
Voltage Proof	No permanent breakdown or arcing	1 minute at 20
Dissipation Factor (DF)	0.1%	at 20, 1kHz; Measuring frequency: 1kHz10%, Measuring voltage: 1Vrms max.
Insulation Resistance (IR)	C 0.33uF: IR 30000M C > 0.33uF: IR*C 5000S	measured at rated voltage or less than 100VDC, 1 minute at 20 and RH65%
Endurance	C/C 5%; DF 0.40%; IR 50% of the specified value	1000 hours with 125% of rated voltage at 85. After the test.
Climatic Catalogue	40/85/21
Solderability	Solder should cover at least 75% of the circumference of the lead	Solder bath: 2355, Bath time: 2.00.5 sec, Speed: 256 mm/sec, Depth: 1.5+0.5/-0mm from the bottom of the body
Heat Shock (Soldering Heat)	C/C 5%, DF 1.2*specified value. No visible damage to capacitor appearance after test.	Solder bath: 2605, Bath time: 5.00.5 sec, Speed: 256 mm/sec, Depth: 1.5+0.5/-0mm from the bottom of the body
Lead Tensile Strength	No visible damage to appearance.	Pull: 2.2 LBS, Time: 5 sec
Lead Bending Strength	No visible damage to appearance.	Load of lead: 1.1 LBS. The body of capacitor is bent 90 degrees and returned to its original position.
Vibration	No visible damage to appearance.	Frequency cycle: from 10Hz to 55Hz and then 10Hz, Amplitude: 1.5mm in three directions, Time: 2 hours each direction with a total of 6 hours.
Reference Standard	IEC 384-16, GB10190
Model Number	102J2000D02	0.001uF, J (5%), 2000VDC
Model Number	103K2000D02	0.01uF, K (10%), 2000VDC
Dimensions (mm)	W 0.5, H 0.5, T 0.5, P 1.0, D 0.05, L +5/-10
Dimensions (for 102J2000D02)	W: 18.0, H: 10.0, T: 5.0, P: 15.0, D: 0.8, L: 25.0	Color: Yellow
Dimensions (for 103K2000D02)	W: 26.5, H: 17.0, T: 10.0, P: 22.5, D: 0.8, L: 25.0	Color: Yellow
Soldering Suggestion (Max Temp)	270	Time: 4S (Pre-heating: 105, 1min)
Storage Environment	Temperature 30, Humidity 70% (in MBB)	24 months storage period if MBB is not opened.
Storage Condition	Avoid exposure to hydrogen chloride, hydrogen sulfide, sulfuric acid, high temperature and high humidity.	Store under specified storage environment.