Polypropylene Film Capacitor Jimson MPA224J2000D01 Featuring Self Healing and High Capacitance Values
Product Overview
The JIMSON (JS) MPA series capacitor is a non-inductive metallized polypropylene film capacitor designed for a wide range of electronic applications. Featuring self-healing properties, low dissipation factor, and high insulation resistance, these capacitors offer compact size and high capacitance values. They are ideal for coupling, decoupling, by-passing, and timing circuits, as well as automatic control systems, communication equipment, charging/discharging, lighting, noise suppression, and frequency modulation.
Product Attributes
- Brand: JIMSON (JS)
- Origin: Xiamen, China
- Construction: Non-inductive, Self-healing
- Dielectric: Polypropylene film
- Electrodes: Vacuum evaporated metal
- Coating: Wrapped with Mylar tape and ends sealed with epoxy resin
- Leads: Solder-plated copper-clad wire
- Terminal Contact: Electrically welded (arc spot welding)
- Certifications: RoHS Compliant (RoHS 2.0)
- Color: Yellow (for 224J2000V model)
Technical Specifications
| Specification | Description / Value | Test Conditions |
|---|---|---|
| Product Name | Capacitor | |
| Type | MPA | |
| Rated Capacitance | 0.22uF (224) | Measuring frequency: 1kHz, Measuring voltage: 1V |
| Capacitance Tolerance | J (5%) | |
| Rated Voltage | 2000VDC | Unit: VDC (5s at 20) |
| Voltage Proof | No permanent breakdown or arcing | |
| Dissipation Factor (DF) | 0.1% | Measuring frequency: 1kHz10%, Measuring voltage: 1V |
| Insulation Resistance (IR) | 30000M (for C0.33uF) IR*C5000S (for C0.33uF) | Measured at rated voltage or less than 100VDC, 1 minute at 20 and RH65% |
| Endurance | C/C5%; DF0.40%; IR 50% of specified value | 1000 hours with 125% of rated voltage at 85 |
| Climatic Category | 40/85/21 | |
| Solderability | Solder should cover at least 75% of the circumference of the lead | Solder bath: 2355, Bath time: 2.00.5 sec, Speed: 256 mm/sec, Depth: 1.5+0.5/-0mm from bottom of body |
| Heat Shock | C/C5%, DF1.2 times specified value; Capacitor appearance should be free from visible damage after test | Solder bath: 2605, Bath time: 5.00.5 sec, Speed: 256 mm/sec, Depth: 1.5+0.5/-0mm from bottom of body |
| Lead Tensile Strength | No visible damage to appearance | Pull: 2.2 LBS, Time: 5 sec |
| Lead Bending Strength | No visible damage to appearance | Load of lead: 1.1 LBS, Body bent 90 degrees and returned to original position |
| Vibration | No visible damage to appearance | Frequency cycle: 10Hz to 55Hz then 10Hz, Amplitude: 1.5mm in three directions, Time: 2 hours each direction (total 6 hours) |
| Reference Standard | IEC 384-16, GB10190 | |
| Dimensions (Model: 224J2000V) | W MAX: 32.0mm, H MAX: 25.0mm, T MAX: 15.0mm, P: 32.0mm 1.0, D: 0.8mm 0.05, L: 40.0mm 5.0 | Unit: mm |
| Storage Period (Unopened MBB) | 24 months | Storage temperature 30, humidity 70% |
Soldering Suggestion
| Step | Temperature | Time |
|---|---|---|
| Pre-heating | 105 | 1 min |
| Soldering | 270 | 4 sec |
Storage Environment and Conditions
Storage Environment: Store in conditions where temperature is 30 and humidity is 70%. Unopened MBB (Moisture Barrier Bag) ensures a 24-month storage period.
Storage Conditions: Due to atmospheric components like hydrogen chloride, hydrogen sulfide, and sulfuric acid, solderability of terminations may degrade when stored in air. Products must not be exposed to high temperature and high humidity conditions and must be stored according to the specified storage environment.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.