polypropylene film capacitor Jimson MPC504J1000D01 designed for filtering noise suppression and pulse circuits

Price Negotiable

Price: Negotiable

MOQ: Negotiable

Delivery Time: Negotiable

Product Description

Product Overview

The JIMSON ELECTRONICS (XIAMEN) CO.,LTD. MPC series capacitors are designed for various electronic applications, offering non-inductive construction, self-healing properties, and excellent moisture resistance. They are ideal for filtering, noise suppression, pulse circuits, and signal coupling in communication equipment and power electronics.

Product Attributes

Brand: JIMSON (JS)
Origin: Xiamen, China
Dielectric: Polypropylene film
Electrodes: Vacuum evaporated metal
Coating: Reinforced flame retardant plastic case sealed with epoxy resin (UL94V-0)
Leads: Radial leads of tinned wire/insulation flexible wire
Terminal Contact: Electrically welded (arc spot welding)
Marking: UV ink or laser engraving
Reference Standards: IEC 60384-16, GB10190

Technical Specifications

Description	Value	Test Conditions
1. SPECIFIC REFERENCE DATA
Capacitance	Rated Capacitance: 0.01-60uF	Measuring frequency: 1kHz10%, Measuring voltage: 1Vrms.max.
Capacitance Tolerance	J=5% / K=10%
Voltage	Rated voltage: 250-2000VDC
Voltage Proof	1.6*U (1 minute at 20)	No permanent breakdown or flashover
Dissipation Factor (DF)	DF0.1% (C10uF) DF0.2% (C	(at 20, 1kHz, 1Vrms.max.)
Insulation Resistance (IR)	C0.33uF: IR30000M C0.33uF: IR*C5000S	Measured at rated voltage or less than 100VDC, 1 minute at 20 and RH65%
Endurance	C/C5%; DF0.40%; IR50% of specified value	1000 hours with 125% of rated voltage at 85.
Climatic Catalogue	40/85/21
Solder Ability	Solder should cover at least 75% of the circumference of the lead	Solder bath: 2355, bath time: 2.00.5 sec, speed: 256 mm/sec, depth: 1.5+0.5/-0mm from the bottom of the body
Heat Shock	C/C5% DF1.2*specified value. Visual inspection for damage.	Solder bath: 2605, bath time: 5.00.5 sec, speed: 256 mm/sec, depth: 1.5+0.5/-0mm from the bottom of the body
Lead Tensile Strength	Visual inspection for damage.	Pull: 2.2 LBS, time: 5 sec
Lead Bending Strength	Visual inspection for damage.	Load of lead: 1.1 LBS (body bent 90 degrees and returned to original position)
Vibration	Visual inspection for damage.	Frequency cycle: 10Hz to 55Hz to 10Hz, Amplitude: 1.5mm in three directions, Time: 2 hours each direction (total 6 hours)
3. FEATURE
Non-inductive construction and self-healing
High property moisture resistance
Super physical and environmental characteristics
4. APPLICATION
Filter and noise suppression circuit
Pulse, logic, and timing circuit
Dc-blocking, by-passing and signal coupling in general communications equipment
Widely used in power electronic equipment for peak voltage and current absorption protection during switching device turn-off
7. WEATHERABILITY TESTING METHODS
High temperature	Capacitance drift: +5% max of initial value; DF:	+85, thermal stability
Low temperature	Capacitance drift: -5% max of initial value; DF:	-40, thermal stability
Humidity	Capacitance drift: +10% max of initial value; IR: >50% of initial value; DF:	853, 853% RH for 10001% hrs, then 16 hours recovery
10. DIMENSION
Model	CAP (uF)	WHT (0.5)	L (5)	P (1.0)	D (0.05)	Remarks
MPC103J2000D02	0.01	18126	L25	P15	CP0.6	YELLOW
MPC104J630D04	0.1	181810	L25	P15	CP0.8	YELLOW, Double film
MPC104K520D01	0.1	13126	L25	P10	CP0.6	YELLOW
MPC105J1000D01	1.0	322011	L3.8	P27.5	CP0.8	YELLOW
MPC105K1000D02	1.0	41.531.424	L25	P37.5	CP1.0	YELLOW
MPC105K450D01	1.0	181810	L23	P15	CP0.8	YELLOW
MPC106J650D01	10.0	41.52419	L21	P37.5	CP0.8	YELLOW, 4 leads, B=12.7
MPC155K100D01	1.5	15177	L20	P12.5	CU0.8	YELLOW
MPC155K450D01	1.5	E8	L25	P22.5	CP0.8	YELLOW
MPC156K1200D01	15.0	42.53825	L21	P37.5	CU0.8	YELLOW
MPC156K900D01	15.0	423623	L25	P37.5	CU0.8	BLACK, Black case yellow glue
MPC224J630A01	0.22	181610	L25	P15	CP0.6	YELLOW
MPC226K1200D01	22.0	584028	L21	P52.5	CU1.0	YELLOW, Boxed
MPC332J1000D02	0.0033	1394	L25	P10	CP0.6	YELLOW
MPC332J2000D01	0.0033	18126	L25	CP0.6	L25	GREY YELLOW GLUE
MPC333K1000A01	0.033	18126	L25	P15	CP0.8	YELLOW, Double film
MPC335K250D01	3.3	312514	L25	P27.5	CP0.8	YELLOW
MPC335K450D01	3.3	322011	L25	P27.5	CP0.8	YELLOW
MPC473J630D05	0.047	18126	L3.8	P15	CP0.6	YELLOW
MPC504J1000D01	0.05	383020	L21	P30.5	CP0.8	BLACK, Black case yellow glue
MPC504J1000D02	0.05	323318	L3.5	P27.5	CU1.0	YELLOW, Irregular box
MPC565M250D01	5.6	312514	L30	P27.5	CP0.8	YELLOW
MPC605K1200D01	6.0	41.531.424	L25	P37.5	CP1.0	YELLOW
MPC606K500D01	60.0	42.55035	L21	P37.5	CP0.8	YELLOW, 4 leads, B=20.3
MPC805K1000D01	8.0	323722	L23	P27.5	CP0.8	YELLOW
11. Caution
Soldering Suggestion	Maximum Soldering Temperature: 270, Time: 4S, Pre-heating: 105, 1min
Salt fog test	The lead wire is tin-plated copper-coated steel. Please test after wave soldering.
12. Storage Environment and Conditions
Storage Environment	Temperature 30, Humidity 70%	MBB (Moisture Barrier Bag) not open ensures 24 months storage period.
Storage Condition	Store in air, avoid exposure to high temperature and humidity. Presence of HCl, H2S, H2SO4 in atmosphere may degrade solderability.	Must be stored under the conditions specified in 12.1.