capacitor Jimson MPC474J1000D01 designed for filtering noise suppression pulse and timing circuits

Price Negotiable

Price: Negotiable

MOQ: Negotiable

Delivery Time: Negotiable

Product Description

JIMSON MPC Series Capacitors

The JIMSON MPC Series Capacitors are designed for reliable performance in various electronic applications. Featuring a non-inductive construction and self-healing properties, these capacitors offer excellent moisture resistance and superior physical and environmental characteristics. They are suitable for filtering, noise suppression, pulse, logic, and timing circuits, as well as DC-blocking, by-passing, and signal coupling in communication equipment.

Product Attributes

Brand: JIMSON (JS)
Origin: Xiamen, China
Dielectric: Polypropylene film
Electrodes: Vacuum evaporated metal
Encapsulation: Reinforced flame retardant plastic case sealed with epoxy resin (UL94V-0 compliant)
Leads: Radial leads of tinned wire/insulation flexible wire
Terminal Contact: Electrically welded (arc spot welding)
Construction: Non-inductive
Certifications: RoHS Compliant (RoHS 2.0)
Color: Yellow (as indicated in dimensions table)

Technical Specifications

Specification	Description	Test Conditions
Rated Capacitance	0.0022uF ~ 0.47uF	Measuring frequency: 1kHz10%, Measuring voltage: 1Vrms.max.
Capacitance Tolerance	J=5%, K=10%
Rated Voltage	1000VDC
Voltage Proof	1.6*UR (1 minute at 20)	No permanent breakdown or flashover
Dissipation Factor (tan )	0.1%	at 20, 1kHz; Measuring frequency: 1kHz10%, Measuring voltage: 1Vrms.max.
Insulation Resistance (IR)	C0.33uF: IR30000M C0.33uF: IR*C5000S	Measured at rated voltage or less than 100VDC, 1 minute at 20 and RH65%
Endurance	C/C5%; DF0.40%; IR50% of specified value	1000 hours with 125% of rated voltage at 85. After the test.
Climatic Catalogue	40/85/21
Solderability	Solder should cover at least 75% of the circumference of the lead	Solder bath: 2355, Bath time: 2.00.5 sec, Speed: 256 mm/sec, Depth: 1.5+0.5/-0mm from the bottom of the body
Heat Shock	C/C5%, DF1.2*specified value. Capacitor appearance should be free from visible damage after the test.	Solder bath: 2605, Bath time: 5.00.5 sec, Speed: 256 mm/sec, Depth: 1.5+0.5/-0mm from the bottom of the body
Lead Tensile Strength	No damage to leads	Pull: 2.2 LBS, Time: 5 sec
Lead Bending Strength	No damage to leads	Load of lead: 1.1 LBS, The body of capacitor is bent 90 degrees and returned to its original position
Vibration	No visible damage to appearance	Frequency cycle: 10Hz to 55Hz and then 10Hz, Amplitude: 1.5mm in three directions, Time: 2 hours each direction with a total of 6 hours
Reference Standard	IEC 384-16, GB10190

Dimensions

Model	Capacitance	Color	W (mm)	H (mm)	T (mm)	P (mm)	D (mm)	L (mm)
222J1000D02	0.0022uF	Yellow	13.0 0.5	11.0 0.5	5.0 0.5	10.0 1.0	0.6 0.05	25.0 +5/-10
222K1000D01	0.0022uF	Yellow	13.0 0.5	11.0 0.5	5.0 0.5	10.0 1.0	0.6 0.05	25.0 +5/-10
333J1000VDC	0.033uF	Yellow	18.0 0.5	10.0 0.5	5.0 0.5	15.0 1.0	0.8 0.05	25.0 +5/-10
154K1000D01	0.15uF	Yellow	18.0 0.5	14.5 0.5	8.5 0.5	15.0 1.0	0.8 0.05	25.0 +5/-10
104K1000D01	0.1uF	Yellow	26.5 0.5	16.0 0.5	17.0 0.5	22.5 1.0	0.8 0.05	25.0 +5/-10
474J1000D01	0.47uF	Yellow	26.5 0.5	22.0 0.5	12.0 0.5	22.5 1.0	0.8 0.05	25.0 +5/-10

Caution and Storage

Soldering Suggestion: Pre-heating: 105, 1min; Soldering: 270, 4S.
Salt Fog Test: Test the salt mist after wave peak welding as the lead wire is tin-plated copper-coated steel.
Storage Environment: Temperature 30, Humidity 70%. Unopened MBB (Moisture Barrier Bag) ensures 24 months of storage.
Storage Conditions: Avoid exposure to high temperature and high humidity. Store in air, but be aware that atmospheric contaminants (hydrogen chloride, hydrogen sulfide, sulfuric acid, etc.) can degrade lead solderability.