Jimson MPC103J2000D02 capacitor designed for logic timing pulse and communication equipment circuits
Price:
Negotiable
MOQ:
Negotiable
Delivery Time:
Negotiable
Product Description
Product Overview
The JIMSON MPC series capacitors, manufactured by () (JIMSON ELECTRONICS (XIAMEN) CO.,LTD.), are designed for a wide range of electronic applications. These non-inductive, self-healing capacitors feature high moisture resistance and excellent environmental adaptability. They are suitable for filtering, noise suppression, pulse, logic, and timing circuits, as well as DC-blocking, by-passing, and signal coupling in communication equipment. Additionally, they provide protection against peak voltage and current in power electronic devices.
Product Attributes
- Brand: JIMSON (JS)
- Origin: Xiamen, China
- Dielectric: Polypropylene film
- Electrodes: Vacuum evaporated metal
- Coating: Reinforced flame retardant plastic case sealed with epoxy resin (UL94V-0)
- Leads: Radial leads of tinned wire/insulation flexible wire
- Terminal connection: Electrically welded
- Marking: UV ink or laser engraving
- Reference Standards: IEC 60384-16, GB10190
Technical Specifications
| Description | Value | Test Conditions |
| Capacitance | ||
| Rated Capacitance | 0.01-60uF | Measuring frequency: 1kHz10%; Measuring voltage: 1Vrms.max. |
| Capacitance Tolerance | J=5% / K=10% | |
| Voltage | ||
| Rated Voltage | 250-2000VDC | |
| Voltage Proof | 1.6*U (1 minute at 20) | No permanent breakdown or flashover |
| Dissipation Factor (tangent of loss) | ||
| DF | 0.1% (for C10uF) | at 20, 1KHz, 1Vrms.max. |
| DF | 0.2% (for C | at 20, 1KHz, 1Vrms.max. |
| Insulation Resistance | ||
| IR | 30000M (for C0.33uF) | measured at rated voltage or less than 100VDC, 1 minute at 20 and RH65% |
| IR*C | 5000S (for C0.33uF) | measured at rated voltage or less than 100VDC, 1 minute at 20 and RH65% |
| Endurance | ||
| Conditions | 1000 hours with 125% of rated voltage at 85 | C/C5%; DF0.40%; IR50% of the specified value |
| Climatic Catalogue | ||
| Category | 40/85/21 | |
| Solderability | ||
| Conditions | Solder bath: 2355, bath time: 2.00.5 sec, speed: 256 mm/sec, depth: 1.5+0.5/-0mm from the bottom of the body | Solder should cover at least 75% of the circumference of the lead |
| Heat Shock (Soldering Heat Resistance) | ||
| Conditions | Solder bath: 2605, bath time: 5.00.5 sec, speed: 256 mm/sec, depth: 1.5+0.5/-0mm from the bottom of the body | C/C5%, DF1.2*specified value. No visible damage after test. |
| Lead Tensile Strength | ||
| Load | 2.2 LBS | Time: 5 sec. No visible damage. |
| Lead Bending Strength | ||
| Load | 1.1 LBS | The body of capacitor is bent 90 degrees and returned to its original position. No visible damage. |
| Vibration | ||
| Conditions | Frequency cycle: 10Hz to 55Hz and then 10Hz, Amplitude: 1.5mm in three directions, Time: 2 hours each direction (total 6 hours) | No visible damage. |
Dimensions
| SYMBOL | CAP (uF) | COLOR | W*H*T (mm 0.5) | L (mm 5) | P (mm 1.0) | D (mm 0.05) | REMARKS |
| MPC103J2000D02 | 0.01 | YELLOW | 18*12*6 | 25 | 15 | CP0.6 | L25 |
| MPC104J630D04 | 0.1 | YELLOW | 18*18*10 | 25 | 15 | CP0.8 | Double film |
| MPC104K520D01 | 0.1 | YELLOW | 13*12*6 | 25 | 10 | CP0.6 | |
| MPC105J1000D01 | 1.0 | YELLOW | 32*20*11 | 3.8 | 27.5 | CP0.8 | |
| MPC105K1000D02 | 1.0 | YELLOW | 41.5*31.4*24 | 25 | 37.5 | CP1.0 | |
| MPC105K450D01 | 1.0 | YELLOW | 18*18*10 | 23 | 15 | CP0.8 | |
| MPC106J650D01 | 10.0 | YELLOW | 41.5*24*19 | 21 | 37.5 | CP0.8 | Four pin, B=12.7 |
| MPC155K100D01 | 1.5 | YELLOW | 15*17*7 | 20 | 12.5 | CU0.8 | |
| MPC155K450D01 | 1.5 | YELLOW | E8 | 25 | 22.5 | CP0.8 | |
| MPC156K1200D01 | 15.0 | YELLOW | 42.5*38*25 | 21 | 37.5 | CU0.8 | Four pin, B=20.3 |
| MPC156K900D01 | 15.0 | BLACK | 42*36*23 | 25 | 37.5 | CU0.8 | Black case yellow glue |
| MPC224J630A01 | 0.22 | YELLOW | 18*16*10 | 25 | 15 | CP0.6 | |
| MPC226K1200D01 | 22.0 | YELLOW | 58*40*28 | 21 | 52.5 | CU1.0 | Boxed |
| MPC332J1000D02 | 0.0033 | YELLOW | 13*9*4 | 25 | 10 | CP0.6 | |
| MPC332J2000D01 | 0.0033 | YELLOW | 18*12*6 | 25 | CP0.6 | L25 | Gray yellow glue |
| MPC333K1000A01 | 0.033 | YELLOW | 18*12*6 | 25 | 15 | CP0.8 | Double film |
| MPC335K250D01 | 3.3 | YELLOW | 31*25*14 | 25 | 27.5 | CP0.8 | |
| MPC335K450D01 | 3.3 | YELLOW | 32*20*11 | 25 | 27.5 | CP0.8 | |
| MPC473J630D05 | 0.047 | YELLOW | 18*12*6 | 3.8 | 15 | CP0.6 | |
| MPC504J1000D01 | 0.05 | BLACK | 38*30*20 | 21 | 30.5 | CP0.8 | Black case yellow glue |
| MPC504J1000D02 | 0.05 | YELLOW | 32*33*18 | 3.5 | 27.5 | CU1.0 | Irregular box |
| MPC565M250D01 | 5.6 | YELLOW | 31*25*14 | 30 | 27.5 | CP0.8 | |
| MPC605K1200D01 | 6.0 | YELLOW | 41.5*31.4*24 | 25 | 37.5 | CP1.0 | |
| MPC606K500D01 | 60.0 | YELLOW | 42.5*50*35 | 21 | 37.5 | CP0.8 | Four pin, B=20.3 |
| MPC805K1000D01 | 8.0 | YELLOW | 32*37*22 | 23 | 27.5 | CP0.8 |
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
Beijing Silk Road Enterprise Management Services Co., Ltd.
Location
16 Floor, Unit B, Jiatai International Mansion, No 41, Dongsihuan Zhong Road, Chaoyang District, Beijing
Contact Person
Sellina