EMI suppression capacitor JURCC JWX2 XT154KP7 5B5 with epoxy resin encapsulation and compact design
Price:
Negotiable
MOQ:
Negotiable
Delivery Time:
Negotiable
Product Description
Product Overview
The JURCC X2 class safety capacitor is designed for suppressing electromagnetic interference in power supplies. It is suitable for cross-circuit applications with a rated voltage of up to 310VAC and frequencies of 50-60Hz. It can also be used for LED driver power PFC filtering. Manufactured using a polypropylene film dielectric and zinc-aluminum metal layer electrodes, these capacitors are housed in a flame-retardant PBT plastic case and encapsulated with epoxy resin. Their compact design is ideal for high-density installations.
Product Attributes
- Brand: JURCC
- Origin: Guangdong, China
- Material: Polypropylene film dielectric, Zinc-aluminum metal layer electrodes, PBT plastic case, Epoxy resin encapsulation
- Certifications: UL, CSA, ENEC, VDE, CQC, KTC
Technical Specifications
| JURCC Part Number | Model | Capacitance | Voltage | Pitch (P0.5MM) | Lead Length (L+0.5MM) | Dimensions (W*T*H0.5mm) | Lead Diameter ( 0.02MM) |
| XT00001 | JWX2-XT223KP7.5B3 | 223K | 310V AC | 7.5 | 15 | B3(9.5*4*9) | 0.6 |
| XT00003 | JWX2-XT103KP7.5B3 | 103K | 310V AC | 7.5 | 15 | B3(9.5*4*9) | 0.6 |
| XT00009 | JWX2-XT154KP7.5B5 | 154K | 310V AC | 7.5 | 18 | B5(9.5*6*12) | 0.6 |
| XT00021 | JWX2-XT102KCP7.5B3 | 102K | 310V AC | 7.5 | 15 | B3(9.5*4*9) | 0.6 |
| XT00025 | JWX2-XT153KP7.5B3 | 153K | 310V AC | 7.5 | 15 | B3(9.5*4*9) | 0.6 |
| XT00048 | JWX2-XT333KP7.5B3 | 333K | 310V AC | 7.5 | 15 | B3(9.5*4*9) | 0.6 |
| XT00082 | JWX2-XT683KP7.5B3 | 683K | 310V AC | 7.5 | 15 | B3(9.5*4*9) | 0.6 |
| XT00110 | JWX2-XT104KP7.5B4 | 104K | 310V AC | 7.5 | 18 | B4(9.5*5*11) | 0.6 |
| XT00111 | JWX2-XT473KP7.5B4 | 473K | 310V AC | 7.5 | 18 | B4(9.5*5*11) | 0.6 |
| XT00112 | JWX2-XT224KP7.5B5 | 224K | 310V AC | 7.5 | 18 | B5(9.5*6*12) | 0.6 |
Electrical Performance Tests
| No. | Test Item | Test Conditions (Test Method) | Judgment Standard (Performance Requirements) |
| 1 | Capacitance and Loss | 1KHZ,1.0VDC | Capacitance within range, Loss 0.1% |
| 2 | Inter-terminal Withstand Voltage | 1200VDC, 1 minute | No breakdown or arcing |
| 3 | Case-to-terminal Withstand Voltage | 2120VAC, 1 minute | No breakdown or arcing |
| 4 | Insulation Resistance | 100VDC, 1 minute | 1. R.C > 2000M when C > 0.3uF 2. R > 6000M when C 0.3uF |
| 5 | Solderability | Solder temperature: 2355; Immersion time: 2.00.5S | At least 95% of the surface around the lead terminals is uniformly covered with solder, and the body has no visible damage. |
| 6 | Resistance to Soldering Heat | Solder bath temperature: 2605 Immersion time: 10S0.5S | 1. No visible damage 2. Capacitance change rate 5% |
| 7 | Marking Resistance to Solvent | Immersed in a mixture of trichlorotrifluoroethane and isopropanol (305%) at 235, 705%RH for 50.5MIN, wiped 10 times with absorbent cotton. | Marking clear, no visible damage |
| 8 | Damp Heat (Steady State) | No voltage applied; Temperature: 402, Humidity: 93(+2,-3)%RH, Duration: 56 days | 1. No visible damage to appearance; 2. Capacitance change 5%; 3. Tangent of loss angle change: 0.008(Cr1.0Uf), 0.005(Cr1.0Uf) 4. No breakdown or arcing when tested under initial conditions; 5. IR 50% of initial value |
| 9 | Impact or Shock | 1000 times or 4000 times, acceleration 390M/s, pulse duration 6MS. | 1. No visible damage to appearance; 2. Capacitance change 5%; 3. Tangent of loss angle change: 0.008(Cr1.0Uf), 0.005(Cr1.0Uf) 4. No breakdown or arcing when tested under initial conditions; 5. IR 50% of initial value |
| 10 | Vibration | Vibration frequency range is 10-55HZ, amplitude is 0.75MM, vibration from 10HZ to 55HZ and back to 10HZ, approximately 1 minute, total time 6 hours, 3 times in each of the three mutually perpendicular directions every 2 hours. | No visible damage to appearance |
| 11 | Rapid Change of Temperature | The capacitor should withstand 5 temperature cycles. | No visible damage to appearance |
| 12 | Lead Strength | Tensile test: 0.5MM d0.8MM, 10N (in the direction of the pin), 10S. Bending test: 0.5MM d0.8MM, 5N, rotate the capacitor body to 90 degrees, release to 180 degrees opposite position and return to the original point, perform 2 continuous bends in each direction. | 1. No visible damage to pins 2. Capacitance change 5% |
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
Beijing Silk Road Enterprise Management Services Co., Ltd.
Location
16 Floor, Unit B, Jiatai International Mansion, No 41, Dongsihuan Zhong Road, Chaoyang District, Beijing
Contact Person
Sellina