10 MHz crystal resonator JYJE 3TJ410000NYLBC frequency control fundamental mode electronic component

Price Negotiable

Price: Negotiable

MOQ: Negotiable

Delivery Time: Negotiable

Product Description

Crystal Resonator - 3TJ4 Series

The 3TJ4 series crystal resonator from Shenzhen Jingyoujia Electronic Co., Ltd. is a fundamental mode crystal designed for precise frequency control. It offers a nominal frequency of 10.000MHz with tight frequency tolerance and stability, making it suitable for various electronic applications requiring accurate timing.

Product Attributes

Brand: SHENZHEN JINGYOUJIA ELECTRONIC CO., LTD
Origin: Shenzhen, China
Product Code: 3TJ410000NYLBC
Customer Code: C5456643
Customer Product: 3TJ4

Technical Specifications

Item	Symbol	Specification	Min.	Type	Max.	Units	Remark
Nominal Frequency	F0	10.000				MHz
Mode of Vibration		Fundamental
Frequency Tolerance	F/F0		-10		10	ppm	At 253
Operating Temperature Range	TOPR		-40		85
Frequency Stability	TC		-30		30	ppm
Storage Temperature	TSTG		-40		90
Load Capacitance	CL			12		PF
Equivalent Series Resistance	ESR				60
Drive Level	DL			100		W
Insulation Resistance	IR		500			M	At 100VDC
Shunt Capacitance	C0			5		PF
Aging Per Year	Fa		-3		3	ppm	First Year

Reflow Profiles

Feature	Specification
Average Ramp-up Rate (Ts max to Tp)	3/second max.
Preheat Temperature (Ts min)	125
Preheat Temperature (Ts max)	200
Time (ts min to ts max)	60~180 seconds
Temperature (TL)	217
Time (tL)	60~150 seconds
Peak/Classification Temperature (Tp)	2040 second
Ramp-down rate	6/second max.
Time 25to Peak Temperature	8 minutes max.
Suggest reflow times	3 times max.

Mechanical Reliability

Item	Condition	Frequency Change
Drop characteristics	Free drop from 50cm height on a hard wooden board for 3 times.	5ppm Rr as specification
Shake characteristics	Shake frequency 10~55Hz, cyc1~2 minutes, swing 1.5mm, direction x/y/z, all 30 minutes, test after 1 hours.	5ppm Rr as specification
Airproof characteristics	Put crystal into the pressure cabin with alcohol, keep pressure 0.4~0.5mpa 10 minutes, then take out and blow for 5 minutes	IR500M
Weld characteristics	260Max, 10 seconds	90% exhibit tin ok
Humidity characteristics	+402& 90%~95% R.H. 250 hours	5ppm Rr as specification
Low temperature characteristics	-302, 250 hours, put in room temperature, test after 1 hours.	5ppm Rr as specification
High temperature characteristics	+852, 250 hours, put in room temperature, test after 1 hours.	5ppm Rr as specification
Temperature cycling	-303/303 min~+852/303min, 5 cycles	5ppm Rr as specification