Crystal Resonator Frequency 30 MHz Model JYJE TJ1130000DYFBC Electronic Component Specification

Price Negotiable

Price: Negotiable

MOQ: Negotiable

Delivery Time: Negotiable

Product Description

Product Overview

This document outlines the specifications for the TJ11 Crystal Resonator manufactured by Shenzhen Jingyoujia Electronic Co., Ltd. It details the electrical parameters, equivalent circuit, physical appearance, dimensions, reflow soldering profiles, and mechanical reliability testing for this component.

Product Attributes

Brand: SHENZHEN JINGYOUJIA ELECTRONIC CO., LTD
Origin: Shenzhen, China
Product Model: TJ11
Customer Part Number: TJ1130000DYFBC
Frequency: 30.000MHz

Technical Specifications

Item	Symb	Electrical Specification	Remark	Min.	Type	Max.	Units
Nominal Frequency	F0	30.000					MHz
Mode of Vibration		Fundamental
Frequency Tolerance	F/F0		At 253	-10		10	ppm
Operating Temperature Range	TOPR			-30		85
Frequency Stability	TC			-20		20	ppm
Storage Temperature	TSTG			-40		90
Load Capacitance	CL				7		PF
Equivalent Series Resistance	ESR				60
Drive Level	DL				100		W
Insulation Resistance	IR		At 100VDC	500			M
Aging Per Year	Fa		First Year	-3		3	ppm

Reflow Profiles

Feature	Pb-Free Assembly	Unit
Average Ramp-up Rate (Ts max to Tp)	3	/second max.
Preheat Temperature (Ts min)	125
Preheat Temperature (Ts max)	200
Time (ts min to ts max)	60~180	seconds
Temperature (TL)	217
Time (tL)	60~150	seconds
Peak/Classification Temperature (Tp)
Time within 5of actual Peak Temperature(tp)	2040	second
Ramp-down rate	6	/second max.
Time 25to Peak Temperature	8	minutes max.
Suggest reflow times	3	times max.

Mechanical Reliability/Reliability

Item	Condition	Standard	Frequency Change
Drop characteristics	Free drop from 50cm height on a hard wooden board for 3 times. (Board is thickness more than 30 mm.)	Rr as specification	5ppm
Shake characteristics	Shake frequency 10~55Hz, cyc1~2 minutes, swing 1.5mm, direction x/y/z, all 30 minutes, test after 1 hours.	Rr as specification	5ppm
Airproof characteristics	Put crystal into the pressure cabin with alcohol, keep pressure 0.4~0.5mpa 10 minutes, then take out and blow for 5 minutes	IR500M
Weld characteristics	260Max, 10 seconds	90% exhibit tin ok
Humidity characteristics	+402& 90%~95% R.H. 250 hours	Rr as specification	5ppm
Low temperature characteristics	-302, 250 hours, put in room temperature, test after 1 hours.	Rr as specification	5ppm
High temperature characteristics	+852, 250 hours, put in room temperature, test after 1 hours.	Rr as specification	5ppm
Temperature cycling	-303/303 min~+852/303min, 5 cycles	Rr as specification	5ppm