KEMET A759BQ226M1HAAE075 Radial Solid Polymer Aluminum Capacitors Designed for Long Life and Operation
Overview
KEMETs Radial Solid Polymer Aluminum Capacitors offer longer life and greater stability across a wide range of temperatures. This highly conductive solid polymer electrolyte eliminates the risk of drying out and, due to its low ESR properties, is able to withstand higher ripple currents during normal operation. This series is ideally suited for industrial and commercial applications.
Product Attributes
- Brand: KEMET
- Origin: USA
- Certifications: RoHS compliant, Halogen-free
Technical Specifications
| Series | Type | Capacitance Range | Rated Voltage (VDC) | Operating Temperature | Capacitance Tolerance | Life Test | ESR (m) |
| A759 | Radial Solid Polymer Aluminum Capacitors | 2.2 2,200 F | 6.3 250 | 55C to +125C | 20% at 120 Hz/20C | 125C/2,000 hours | See Ordering Options Table |
Performance Characteristics
| Item | Performance Characteristics |
| Leakage Current | I 0.15 CV or 120 A, whichever is greater |
| Dissipation Factor (tan ) | 0.12 (maximum) at 120 Hz/20C for 35 250 VDC |
| Compensation Factor of Ripple Current (RC) vs. Frequency | 120 Hz f 1 kHz f 10 kHz f 100 kHz f |
Test Method & Performance Conditions
| Test | Conditions | Performance |
| Load Life Test | Temperature: 125C Test Duration: 2,000 hours Ripple Current: No ripple current applied Voltage: Sum of DC and peak AC voltage rated voltage | Capacitance Change: Within 20% of initial value Dissipation Factor: Does not exceed 150% of specified value ESR: Does not exceed 150% of specified value Leakage Current: Does not exceed specified value |
| Shelf Life Test | Temperature: 125C Test Duration: 96 hours Ripple Current: No ripple current applied Voltage: No voltage applied | Capacitance Change: Within 20% of initial value Dissipation Factor: Does not exceed 150% of specified value ESR: Does not exceed 150% of specified value Leakage Current: Does not exceed specified value |
| Damp Heat | Rated voltage applied for 1,000 hours at 60C, 90%~95% RH | Capacitance Change: Within 20% of initial value Dissipation Factor: Does not exceed 150% of specified value ESR: Does not exceed 150% of specified value Leakage Current: Does not exceed specified value |
| Surge Voltage | 1,000 cycles, each consisting of charge with surge voltages (Rated Voltage x 1.15) at 105C for 30 seconds (Rc = 1 k) and discharge for 5 minutes, 30 seconds. | Capacitance Change: Within 20% of initial value Dissipation Factor: Does not exceed 150% of specified value ESR: Does not exceed 150% of specified value Leakage Current: Does not exceed specified value |
Shelf Life & Re-Ageing
Shelf life is 12 months. Suitable storage conditions are +5 to +35C and less than 75% relative humidity. Re-age procedure: Apply rated DC voltage at 125C for 120 minutes through a 1 k series resistor.
Environmental Compliance
All Part Numbers are Reach and RoHS compliant, and Halogen-Free.
Applications
Typical applications include long life LED drivers, professional power amplifiers, industrial power supplies, DC/DC converters, voltage regulators, and decoupling.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.