AC Capacitor Interference Suppressor Class X2 KYET PX104K2W1503 Metallized Polypropylene Film Grey

Price Negotiable

Price: Negotiable

MOQ: Negotiable

Delivery Time: Negotiable

Product Description

Product Overview

This specification covers the requirements for KEYA Metallized Polypropylene Film AC Capacitors, specifically designed as Interference Suppressors Class-X2. These capacitors are intended for use in applications requiring suppression of electromagnetic interference from power supplies.

Product Attributes

Brand: KYET (Dongguan Keya Electronics Technology Co., Ltd.)
Origin: China
Material: Metallized Polypropylene Film
Color: Grey
Certifications: cULus, ENEC, CQC

Technical Specifications

KYET P/N	Customer P/N	Capacitance (uF)	Tolerance (%)	Rated Voltage (VAC)	Dimensions (mm) WxHxT	Lead Pitch (P)	Lead Diameter (d)	Color	Symbol
PX104K2W1503	104K380VAC P15 1813.56	0.1	10	380	18x13.5x6	15	0.8	Grey	X2

Item	Description	Test Conditions
Scope	This specification covers the requirements of KEYA Metallized Polypropylene Film AC Capacitor (Interference Suppressors Class-X2).
Standard Atmospheric Conditions	Ambient Temperature: 15 to 35 (+20 5 for doubt) Relative Humidity: 45% to 75% (60% to 70% for doubt) Air Pressure: 86 kPa to 106 kPa
Operating Temperature Range	-40 to +110	Continuous operation at rated voltage.
Construction	Dielectric: Metallized Polypropylene Film Metal Spray: Special Solder Lead Wire: Tinned Copper-clad Steel Wire Epoxy Resin: UL 94V-0 Flame Retardant Plastic Case: UL 94V-0 Flame Retardant
Marking	Manufacturer's Symbol, Type, Class (X2), Capacitance (EIA 3-digit code), Tolerance (J, K, M), Rated Voltage, Climatic Category (40/110/21/B), Approval Marks (cULus/ENEC/CQC), Manufacture Code.
Withstand Voltage (Between Terminals)	4.3*Ur (DC) for 60 sec.	No abnormality.
Withstand Voltage (Between Terminals & Enclosure)	2*Ur+1,500VAC for 2 to 5 sec. (Min. 2,000VAC)	No abnormality.
Dissipation Factor (DF)	0.001 (0.1%) at 1 KHz	Measuring Frequency: 2%; Measuring Voltage: 1 Vrms.
Capacitance	Within the tolerance specified.	Measuring Frequency: 2%; Measuring Voltage: 1 Vrms. at +20 5.
Insulation Resistance (I.R.)	15,000 Mohm (C0.33uf) 5,000 Mohm*uF/C (C>0.33uf)	Applied Voltage: 100 VDC; Charge Time: 605 sec.
Soldering Property	More than 90% of circumferential surface of lead wire shall be covered with new solder.	Soldering temperature: +235 5; Immersion duration: 2 0.5 sec.
Terminal Strength (Tensile)	No abnormality.	Apply 1.0Kg for 10 1 sec. to the terminal in the axial direction and acting in a direction away from the body.
Temperature Cycle	Appearance: No remarkable change. Withstand Voltage: Shall satisfy NO.5.1. Capacitance Change Rate: Within 5%. Dissipation Factor: 0.002 (0.2%) max. @ 1KHz. Insulation Resistance: 50% of the limit value in NO.5.4.	Total 5 cycles: (+20 for 3 min, -40 for 30 min, +20 for 3 min, +110 for 30 min, +20 for 3 min). After test, allow 1.5 0.5 Hrs. at ordinary condition.
Dry Heat Resistance	Appearance: No remarkable change. Withstand Voltage: Shall satisfy NO.5.1. Capacitance Change Rate: Within 5%. Dissipation Factor: 0.002 (0.2%) max. @ 1KHz. Insulation Resistance: 50% of the limit value in NO.5.4.	Test Temperature: +110 2; Test Duration: 16 + 1/-0 hrs.
Cold Resistance	Appearance: No remarkable change. Withstand Voltage: Shall satisfy NO.5.1. Capacitance Change Rate: Within 5%. Dissipation Factor: 0.002 (0.2%) max. @ 1KHz. Insulation Resistance: 50% of the limit value in NO.5.4.	Test Temperature: -40 3; Test Duration: 2 1 hrs.
Damp Heat	Appearance: No remarkable change. Withstand Voltage: Shall satisfy NO.5.1. Capacitance Change Rate: Within 5%. Dissipation Factor: 0.002 (0.2%) max. @ 1KHz. Insulation Resistance: 50% of the limit value in NO.5.4.	Test Temperature: +40 2; Test Humidity: 90% to 95% R.H.; Test Duration: 21 days. After test, allow 1.5 0.5 Hrs. at ordinary condition.
Vibration Resistance	Appearance: No mechanical damage. Connection strength: No short-circuiting or open. Stable connection.	Frequency Change: 10-55-10 Hz; Vibration Distance: 1.5 mm; Test Direction: X,Y,Z; Test Duration: 2+1/-0 hrs each direction.
Soldering Heat Resistance	Appearance: No remarkable change. Marking legible. Connection of Element: Stable. Withstand Voltage Between Terminals: Shall satisfy NO.5.1. Capacitance Change Rate: Within 3%. Dissipation Factor: 0.002 (0.2%) max. @ 1KHz. Insulation Resistance: 50% of the limit value in NO.5.4.	Preheat Temp.: 100~120 (60 sec. max); Temp. Increase: 3/sec. max; Soldering Temp.: +260 5; Immersion Duration: 5 1sec; Immersion Depth: 4 0.8mm. After test, allow 1.5 0.5 Hrs. at ordinary condition.
Endurance Life	Appearance: No remarkable change. Withstand Voltage: Shall satisfy NO.5.1. Capacitance Change Rate: Within 10%. Dissipation Factor: Cr 1uF : 0.008 (0.8%) max. Cr >1uF : 0.005 (0.5%) max. @ 1KHz. Insulation Resistance: 50% of the limit value in NO.5.4.	Test Temperature: +110 2; Test Voltage: 1.25*rated voltage. Test Duration: 1,000 Hrs. (Voltage increased to 1000 Vrms for 0.1 sec. every hour through a 475% resistor).
High Temperature High Humidity	Appearance: No remarkable change. Withstand Voltage: Shall satisfy NO.5.1. Capacitance Change Rate: Within 5%. Dissipation Factor: 0.002 (0.2%) max. @ 1KHz. Insulation Resistance: 50% of the limit value in NO.5.4.	Test Temperature: +85 2; Test Humidity: 85% 2% R.H.; Test Voltage: 240VAC; Test Duration: 1000 Hrs. After test, allow 1.5 0.5 Hrs. at ordinary condition.