Metallized Polypropylene Film AC Capacitor KYET PX104K2H1001 Interference Suppressors Class X2 350VAC 0.1uF
Price:
Negotiable
MOQ:
Negotiable
Delivery Time:
Negotiable
Product Description
Product Overview
This specification covers the requirements for KEYA Metallized Polypropylene Film AC Capacitors, specifically designed as Interference Suppressors Class-X2. These capacitors are intended for use in applications requiring suppression of electromagnetic interference in power supplies.
Product Attributes
- Brand: KYET ()
- Origin: Dongguan, China
- Material: Metallized Polypropylene Film
- Color: Grey ()
- Certifications: cULus, ENEC, CQC
Technical Specifications
| KYET P/N | Capacitance (uF) | Tolerance (%) | Rated Voltage (VAC) | Dimensions (mm) WxHxT | Lead Pitch (P) | Lead Diameter (d) | Lead Length (L) Min | Color |
|---|---|---|---|---|---|---|---|---|
| PX104K2H1001 | 0.1 | 10% | 350 | 13x14x8.0 | 10 | 0.6 | 18 | Grey |
| Item | Description | Test Conditions |
|---|---|---|
| Scope | This specification applies to KEYA Metallized Polypropylene Film AC Capacitor (Interference Suppressors Class-X2). | |
| Standard Atmospheric Conditions | Ambient Temperature: 15 to 35 (20 5 for doubt) Relative Humidity: 45% to 75% (60% to 70% for doubt) Air Pressure: 86 kPa to 106 kPa | |
| Operating Temperature Range | -40 to +110 (continuous operation at rated voltage) | |
| Construction | Dielectric: Metallized Polypropylene Film Metal Spray: Special Solder Lead Wire: Tinned Copper-clad Steel Wire Epoxy Resin: UL 94V-0 Flame Retardant Plastic Case: UL 94V-0 Flame Retardant | |
| Marking | Manufacturer Symbol, Type, Class (X2), Capacitance (EIA 3-digit code), Tolerance (J, K, M), Rated Voltage (310-350-380V), Climatic Category (40/110/21/B), Approval Marks (cULus, ENEC, CQC), Manufacture Code. | |
| Withstand Voltage | Between Terminals: 4.3*Ur (DC) for 60 sec Between Terminals & Enclosure: 2*Ur+1,500VAC (min. 2,000VAC) for 2 to 5 sec | |
| Dissipation Factor (DF) | 0.001 (0.1%) at 1 KHz | Measuring Frequency: 2% Measuring Voltage: 1 Vrms |
| Capacitance (CAP) | Within the tolerance specified | Measuring Frequency: 2% Measuring Voltage: 1 Vrms |
| Insulation Resistance (I.R.) | 15,000 M (C0.33uf) 5,000 M*uF/C (C>0.33uf) | Vt=100 VDC Charge Time: 605 sec. |
| Soldering Property | More than 90% of circumferential surface of lead wire shall be covered with new solder. | Soldering temperature: +235 5 Immersion duration: 2 0.5 sec |
| Terminal Strength | Shall be no abnormality. | Apply 1.0Kg for 10 1 sec. to the terminal in the axial direction and acting in a direction away from the body. |
| Temperature Cycle | Appearance: Shall be no remarkable change Withstand Voltage: Shall satisfy NO.5.1 Capacitance Change Rate: Within 5% Dissipation Factor: 0.002 (0.2%) max. @ 1KHz Insulation Resistance: 50% of the limit value of NO.5.4 | Total 5 cycles: -40 to +110 After test, allow 1.5 0.5 Hrs. at ordinary condition. |
| Dry Heat Resistance | Appearance: Shall be no remarkable change Withstand Voltage: Shall satisfy NO.5.1 Capacitance Change Rate: Within 5% Dissipation Factor: 0.002 (0.2%) max. @ 1KHz Insulation Resistance: 50% of the limit value of NO.5.4 | Test Temperature: +110 2 Test Duration: 16 + 1/-0 hrs. |
| Cold Resistance | Appearance: Shall be no remarkable change Withstand Voltage: Shall satisfy NO.5.1 Capacitance Change Rate: Within 5% Dissipation Factor: 0.002 (0.2%) max. @ 1KHz Insulation Resistance: 50% of the limit value of NO.5.4 | Test Temperature: -40 3 Test Duration: 2 1 hrs. |
| Damp Heat | Appearance: Shall be no remarkable change Withstand Voltage: Shall satisfy NO.5.1 Capacitance Change Rate: Within 5% Dissipation Factor: 0.002 (0.2%) max. @ 1KHz Insulation Resistance: 50% of the limit value of NO.5.4 | Test Temperature: +40 2 Test Humidity: 90% to 95% R.H. Test Duration: 21 days. After test, allow 1.5 0.5 Hrs. at ordinary condition. |
| Vibration Resistance | Appearance: Shall be no mechanical damage. Connection strength: Shall be no short-circuiting or open. The connection shall be stable. | Frequency Change: 10-55-10 Hz Vibration Distance: 1.5 mm. Test Direction: X,Y,Z Test Duration: 2+1/-0 hrs each direction |
| Soldering Heat Resistance | Appearance: Shall be no remarkable change. The marking shall be legible. Connection of Element: Shall be stable. | Preheat Temp.: 100~120, 60 sec. max. Soldering Temperature: +260 5 Immersion Duration: 5 1sec. Immersion Depth: 4 0.8mm from roots. After test, allow 1.5 0.5 Hrs. at ordinary condition. Withstand Voltage Between Terminals: Shall satisfy NO.5.1 Capacitance Change Rate: Within 3% Dissipation Factor: 0.002 (0.2%) max. @ 1KHz Insulation Resistance: 50% of the limit value of NO.5.4 |
| Endurance | Appearance: Shall be no remarkable change Withstand Voltage: Shall satisfy NO.5.1 Capacitance Change Rate: Within 10% Dissipation Factor: 1uF: 0.008 (0.8%) max. >1uF: 0.005 (0.5%) max. @ 1KHz Insulation Resistance: 50% of the limit value of NO.5.4 | Test Temperature: +110 2 Test Voltage: 1.25 * rated voltage. Test Duration: 1,000 Hrs. Once every hour voltage increased to 1000 V rms for 0.1 sec. applied individually through a 475 % resistor. |
| High Temperature High Humidity | Appearance: Shall be no remarkable change Withstand Voltage: Shall satisfy NO.5.1 Capacitance Change Rate: Within 5% Dissipation Factor: 0.002 (0.2%) max. @ 1KHz Insulation Resistance: 50% of the limit value of NO.5.4 | Test Temperature: +85 2. Test Humidity: 85% 2% R.H. Test Voltage: 240VAC Test Duration: 1000 Hrs. After test, allow 1.5 0.5 Hrs. at ordinary condition. |
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
Beijing Silk Road Enterprise Management Services Co., Ltd.
Location
16 Floor, Unit B, Jiatai International Mansion, No 41, Dongsihuan Zhong Road, Chaoyang District, Beijing
Contact Person
Sellina