metallized polypropylene film capacitor KYET KP224J2G1018 with epoxy resin encapsulation and copper clad steel wire leads
Price:
Negotiable
MOQ:
Negotiable
Delivery Time:
Negotiable
Product Description
Product Overview
The CHIEFCON KP224J2G1018 is a Metallized Polypropylene Film Capacitor (MPP/CBB22) designed for reliable performance in various electronic circuits. It features a robust construction with a metallized polypropylene dielectric, special solder spray, copper-clad steel wire leads, and an epoxy resin encapsulation within a UL V-0 rated plastic case. This capacitor is suitable for applications requiring stable capacitance and low dissipation factor.
Product Attributes
- Brand: CHIEFCON
- Origin: Dongguan, China
- Material: Metallized Polypropylene Film
- Certifications: UL V-0 (for Epoxy Resin and Plastic Case)
Technical Specifications
| CHIEFCON P/N | Customer P/N | Capacitance (uF) | Tolerance (%) | Rated Voltage (VDC) | Dimensions (mm) W1 | Dimensions (mm) H1 | Dimensions (mm) T1 | Lead Pitch (mm) 0.5 | Wire Diameter (mm) 0.05 | Lead Length (mm) min | Marking |
| KP224J2G1018 | 0.22 | 5% | 400 | 12 | 10.5 | 5.5 | 10 | 0.6 | 15 | 224 5 400 J |
| Item | Description | Conditions | |||||||
| Scope | This specification applies to KYET Metallized Polypropylene Film Capacitors (MPP/MPR/CBB21/CBB22). | ||||||||
| Standard Atmospheric Conditions for Measurements | Ambient Temperature: 15 to 35 (or +20 5 if in doubt) | Relative Humidity: 45% to 75% (or 60% to 70% if in doubt) | Air Pressure: 86 kpa to 106 kpa | ||||||
| Operating Temperature Range | -40 to +100 | Capacitor can be operated continuously at rated voltage. | |||||||
| Construction | Dielectric: Metallized Polypropylene Film | Metal Spray: Special Solder | Lead Wire: Copper-clad Steel Wire | Epoxy Resin: UL V-0 Flame Retardant | Plastic Case: UL V-0 Flame Retardant | ||||
| Marking | Manufacturer Symbol (KYET ELECTRONICS CO., LTD) | Type/Material (MPP for Metallized Polypropylene) | Capacitor Class (CBB22) | Nominal Capacitance (EIA 3-digit code) | Tolerance (J=5%, K=10%, M=20%) | Rated Voltage (100, 250, 400, 450, 630 VDC) | Operating Temperature Range (-40100) | Dissipation Factor (Max 0.1% at 1KHz, 25) | Insulation Resistance (CR0.33F: IR10000M; CR0.33F: IR5000M/F at UR100V) |
| Electrical Characteristics: Withstand Voltage (TV) | Between Terminals: Apply 1.5*Ur (DC) for 60 sec. No abnormality. | Between Terminals & Enclosure: Apply 2*Ur+500V for 2 to 5 sec. Min. 1,000VDC. No abnormality. | |||||||
| Electrical Characteristics: Dissipation Factor (DF) | 0.001 (0.1%) at 1 KHz | Measuring Frequency: 2%; Measuring Voltage: 1 Vrms. | |||||||
| Electrical Characteristics: Capacitance (CAP) | Within the tolerance specified. | Measuring Frequency: 2%; Measuring Voltage: 1 Vrms. at +20 5. | |||||||
| Electrical Characteristics: Insulation Resistance (I.R.) | 10,000 Mohm (C0.33uf) | 5,000 Mohm*uF/C (C>0.33uf) | Test Voltage: 100 VDC; Charge Time: 605 sec. | ||||||
| Mechanical Characteristics: Terminal Strength | Tensile Strength: Apply 1.0Kg for 10 1 sec. in the axial direction. No abnormality. | ||||||||
| Endurance Characteristics: Temperature Cycle | Appearance: No remarkable change. Withstand Voltage: Shall satisfy NO.5.1. Capacitance Change Rate: Within 5%. Dissipation Factor: 0.002 (0.2%) max. at 1KHz. Insulation Resistance: 50% of the limit value of NO.5.4. | Test Temperature Cycle: Total 5 cycles (e.g., -40 to +100). After test, allow 1.5 0.5 Hrs. at ordinary condition before measurements. | |||||||
| Endurance Characteristics: Dry Heat Resistance | Appearance: No remarkable change. Withstand Voltage: Shall satisfy NO.5.1. Capacitance Change Rate: Within 5%. Dissipation Factor: 0.002 (0.2%) max. at 1KHz. Insulation Resistance: 50% of the limit value of NO.5.4. | Test Temperature: +100 2. Test Duration: 16 + 1/-0 hrs. | |||||||
| Endurance Characteristics: Cold Resistance | Appearance: No remarkable change. Withstand Voltage: Shall satisfy NO.5.1. Capacitance Change Rate: Within 5%. Dissipation Factor: 0.002 (0.2%) max. at 1KHz. Insulation Resistance: 50% of the limit value of NO.5.4. | Test Temperature: -40 3. Test Duration: 2 1 hrs. | |||||||
| Endurance Characteristics: Damp Heat | Appearance: No remarkable change. | Test Temperature: +40 2. Test Humidity: 90% to 95% R.H. Test Duration: 2 1 hrs. After test, allow 1.5 0.5 Hrs. at ordinary condition before measurements. |
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
Beijing Silk Road Enterprise Management Services Co., Ltd.
Location
16 Floor, Unit B, Jiatai International Mansion, No 41, Dongsihuan Zhong Road, Chaoyang District, Beijing
Contact Person
Sellina