KYET MMKP823J3A1501 polypropylene film capacitor with low loss and flame resistant epoxy resin sealing
Price:
Negotiable
MOQ:
Negotiable
Delivery Time:
Negotiable
Product Description
Dongguan Keya Electronic Technology Co., LTD.
Product: MMKP82 Double sided metallized polypropylene film capacitor (Box-type)
Description: This capacitor utilizes a double-sided metallized polypropylene film dielectric with a polyester film electrode. It features a non-inductive configuration with spray-metal formed terminals and tin-plated copper leads. The capacitor is sealed with flame-retardant epoxy resin.
Features:
- Double-sided metallized polypropylene structure
- Low loss and small inherent temperature rise
- Negative temperature coefficient of capacitance
- Excellent active and passive flame resistant circuit
Typical Applications:
- High voltage, high frequency, and pulse circuits
- Lamp capacitor for electronic ballasts and compact lamps
- Snubber and SCR commutating circuits
Product Attributes:
- Brand: KYET
- Origin: Dongguan, China
- Material: Polypropylene film dielectric, Polyester film electrode, Tin-plated copper leads, Flame-retardant epoxy resin sealing
- Color: Grey casing ()
Technical Specifications
| Item | Performance Requirement | Test Method | Specifications |
|---|---|---|---|
| Applicable Temperature Range | -40 ~ +105 | GB/T 10190 (IEC 60384-16) | |
| Rated Voltage (UR) | 400VDC/630VDC/1000VDC/1250VDC/1600VDC/2000VDC/3000VDC | ||
| Capacitance Range | 0.0022 ~ 1.8F | ||
| Capacitance Tolerance | Ref. item 4.2.2 | 2%(G), 3%(H), 5%(J), 10%(K) | |
| Dissipation Factor (tg) | 0.0010 (20, 1KHz, 0.1V) | Ref. item 4.2.3 | |
| Withstand Voltage | 1.6UR, 5s (no breakdown or arcing) | Ref. item 4.2.1 | |
| Insulation Resistance (IR) | IR50000MF (CN0.33F); IR30000MF (CN>0.33F) (100V, 20, 1min) | Ref. item 4.2.4 | |
| Solderability | Good tin plating | Soldering bath method Tb, Method 1A (leakage current set to 20mA) | Solder temperature: 2352, Immersion time: 2.00.5s |
| Lead Strength (Tensile) | 0.5d0.8mm: 10N; 1.0d1.2mm: 20N | Ref. item 4.3 | |
| Lead Strength (Bending) | 0.5d0.8mm: 5N; 1.0d1.2mm: 10N (two consecutive bends in each direction) | Ref. item 4.3 | |
| Resistance to Soldering Heat | No visible damage, clear marking | Soldering bath method Tb, Method 1A (2605, 101s) | |
| Rapid Change of Temperature | No visible damage, clear marking | Ref. item 4.6 (5 cycles: -40 to +105, 30min each) | Capacitance change: 5%; tg increase: 0.0020 (10kHz, C1.0F) / 0.0020 (1kHz, C>1F); IR: 50% of rated |
| Climatic Sequence | No visible damage, clear marking | Ref. item 4.10 | Capacitance change: 3%; tg increase: 0.0030 (10kHz, C1.0F) / 0.0030 (1kHz, C>1F); IR: 50% of rated |
| Damp Heat (Steady State) | No obvious bulging, clear marking | Ref. item 4.11 (85, 85%RH, 48H) | Capacitance change: 2%; tg increase: 0.0010 (1kHz); IR: 90% of rated |
| Endurance | No visible damage, clear marking | Ref. item 4.12 (+85, 1000h, 1.25x rated voltage) | Capacitance change: 5%; tg increase: 0.0020 (10kHz); IR: 50% of rated |
| Characteristics with Temperature | Ref. item 4.2.6 | At -40: 0 (Cb-Cd)/Cd +3%; At 110: -4% (Cf-Cd)/Cd 0 | |
| Charge and Discharge | No cracking, no burning | Ref. item 4.13 (10000 cycles) | Capacitance change: 5%; tg increase: 0.0030 (10KHz); Withstand Voltage: 1.6UR; IR: 50% of rated |
| Pulse Voltage | No cracking, no burning | 24 cycles (1.8UR) | Capacitance change: 5%; tg increase: 0.0020 (10kHz); IR: 50% of rated; Withstand Voltage: 1.6UR |
| Ripple Current | No cracking, no burning | 5 hours (10A at 100KHZ, DC bias = UR - ripple voltage) | Capacitance change: 10%; tg increase: 0.0030 (10kHz, 0.1V) / 0.0030 (1kHz, 1V); IR: 50% of rated; Withstand Voltage: 1.6UR |
| Flame Retardancy | IEC695-2-2 Needle Flame Test, Category C | After removing flame, continuous burning time 30S, drippings should not ignite cotton paper below. Exposure time varies with volume. |
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
Beijing Silk Road Enterprise Management Services Co., Ltd.
Location
16 Floor, Unit B, Jiatai International Mansion, No 41, Dongsihuan Zhong Road, Chaoyang District, Beijing
Contact Person
Sellina