Metallized Polypropylene Film Capacitor KYET PS222J3F1505 Featuring UL V0 Flame Retardant and Operation

Price Negotiable

Price: Negotiable

MOQ: Negotiable

Delivery Time: Negotiable

Product Description

Product Overview

This specification applies to KYET Metallized Polypropylene Film capacitors (MPP/CBB81/CBB21/CBB22) manufactured by Dongguan Keya Electronics Co., Ltd. These capacitors are designed for reliable operation within specified environmental and electrical conditions, offering stable performance and durability.

Product Attributes

Brand: KYET ELECTRONICS CO., LTD
Origin: Dongguan, China
Material: Metallized Polypropylene Film
Flame Retardant Rating: UL V-0

Technical Specifications

Item	Description	Details
Standard Atmospheric Conditions for Measurements
Ambient Temperature	15 to 35	(+20 5 for doubt resolution)
Relative Humidity (R.H.)	45% to 75%	(60% to 70% for doubt resolution)
Air Pressure	86 kpa to 106 kpa
Operating Conditions
Operating Temperature Range	-40 to +100	Continuous operation at rated voltage.
Dielectric	Metallized Polypropylene Film
Metal Spray	Special Solder
Lead Wire	Tin-plated Copper-clad Steel Wire
Epoxy Resin	UL V-0 Flame Retardant
Plastic Case	UL V-0 Flame Retardant
Marking
Manufacturer Symbol	KYET ELECTRONICS CO., LTD
Type or Material	PPS	(Metallized Polypropylene Film)
Capacitor Class	CBB81	(PPS class)
Nominal Capacitance	Expressed in 3-digit (EIA) code	(e.g., 222 for 0.0022uF)
Tolerance	J (5%), K (10%), M (20%)
Rated Voltage	100, 250, 400, 450, 630, 1000, 1250, 1600, 2000 VDC
Dissipation Factor (DF)	Max 0.1% (at 1KHz, 25)
Insulation Resistance (IR)	CR0.33F: IR10000M CR0.33F: IR5000M/F (UR100V)	Test Voltage: 100 VDC, Charge Time: 605 sec.
Electrical Characteristics
Withstand Voltage (TV)	Between Terminals: 1.5Ur (DC) for 60 sec. Between Terminals & Enclosure: 2Ur+500V for 2 to 5 sec. (Min. 1000VDC)	Shall be no abnormality.
Dissipation Factor (DF)	0.001 (0.1%) at 1 KHz	Measuring Frequency: 2%; Measuring Voltage: 1 Vrms.
Capacitance (CAP)	Within the tolerance specified	at +20 5. Measuring Frequency: 2%; Measuring Voltage: 1 Vrms.
Insulation Resistance (I.R.)	10,000 Mohm (C0.33uf) 5,000 Mohm*uF/C (C>0.33uf)	Test Voltage: 100 VDC, Charge Time: 605 sec.
Soldering Property	More than 90% of circumferential surface of lead wire covered with new solder.	Soldering temp: +260 5, Immersion duration: 2 0.5 sec.
Mechanical Characteristics
Terminal Strength (Tensile Strength)	Shall be no abnormality.	Apply 1.0Kg for 10 1 sec. to the terminal in the axial direction.
Endurance Characteristics
Temperature Cycle	Appearance: No remarkable change. Withstand Voltage: Shall satisfy NO.5.1. Capacitance Change Rate: Within 5%. Dissipation Factor: 0.002 (0.2%) max. @ 1KHz. Insulation Resistance: 50% of the limit value of NO.5.4.	Total 5 cycles: -40 to +100. After test, rest 1.5 0.5 Hrs. at ordinary condition.
Dry Heat Resistance	Appearance: No remarkable change. Withstand Voltage: Shall satisfy NO.5.1. Capacitance Change Rate: Within 5%. Dissipation Factor: 0.002 (0.2%) max. @ 1KHz. Insulation Resistance: 50% of the limit value of NO.5.4.	Test Temp: +100 2, Test Duration: 16 1 hrs.
Cold Resistance	Appearance: No remarkable change. Withstand Voltage: Shall satisfy NO.5.1. Capacitance Change Rate: Within 5%. Dissipation Factor: 0.002 (0.2%) max. @ 1KHz. Insulation Resistance: 50% of the limit value of NO.5.4.	Test Temp: -40 3, Test Duration: 2 1 hrs.
Damp Heat	Appearance: No remarkable change. Withstand Voltage: Shall satisfy NO.5.1. Capacitance Change Rate: Within 5%.	Test Temp: +40 2, Test Humidity: 90% to 95% R.H., Test Duration: 2 1 hrs. After test, rest 1.5 0.5 Hrs. at ordinary condition.