Quartz Crystal Resonator KYX KMD260000910 26 Megahertz Frequency Oscillator for Circuit Applications

Price Negotiable

Price: Negotiable

MOQ: Negotiable

Delivery Time: Negotiable

Product Description

Product Description: This document specifies the technical parameters and reliability of the Quartz Crystal Resonator, product model M-49USSMD 26.000MHz. It is designed for applications requiring precise frequency oscillation.

Product Attributes:

Brand:
Origin:
Product Model: M-49USSMD 26.000MHz
Original Factory Model: KMD260000910
Reliability Standard: P.3
Package Outline: P.4~5
Website: www.kaiyuexiang.com

Parameter	Nominal Frequency	Mode of Oscillation	Frequency Tolerance	Temperature Tolerance	Operating Temperature Range	Storage Temperature	Equivalent Resistance	Load Capacitance	Drive Level	Shunt Capacitance	Insulation Resistance	Aging
Specifications	26.000MHz	AT	10PPM	20PPM	-20+70	-40+85	40	9pF	100W	7.0 pF	500M at DC 100V15V	5ppm/year

Reliability Testing:

Category	Item	Conditions	Result Code
Electrical Performance	Low Temperature Resistance	-405 for 500 hours 2 hours, then natural cool to room temp for 1 hour.	()
	High Temperature Resistance	+1005 for 500 hours 2 hours, then natural cool to room temp for 1 hour.	()
	Salt Spray Test	Salt water (5% concentration) at 352 for 48 hours 2 hours, then rinse with clean water.	()
	Humidity Test	602 and 90-98% RH for 500 hours 2 hours, then natural cool to room temp for 1 hour.	()
	Temperature Cycling	-402 for 30 min 1 min, then +852 for 30 min 1 min, 100 cycles, then natural cool for 2 hours.	()
Mechanical Performance	Drop Test	75cm5cm height onto a wooden board (3cm thick), 3 times, test after 1 hour.	()
	Vibration Test	10-55Hz, 1.5mm amplitude, along X, Y, Z axes for 2 hours, test after 1 hour.	()
	Terminal Bending Strength Test	Fix body, twist 45 degrees, then slowly restore.	()
	Terminal Strength	Mounted on PCB, 0.5mm/s speed, 2mm bending, 5 seconds 1 second pressure.	()
	Solderability Test	Apply flux (7-10% concentration) for approx. 5 seconds, then dip in 2305 solder pot for 3 seconds.	()
	Hermeticity Test	Immerse in 855 warm water for 5 minutes, water level approx. 20cm above crystal.	()
	Solder Heat Resistance	In 2655 tin furnace, 2.00.2mm from tin surface, 3 minutes (2 times). In 35010 tin furnace, 2.00.2mm from tin surface, 30.5 seconds (2 times), then natural cool for 2 hours.	()