Electronic Crystal Oscillator HC 49USSMD 110592 MHz Frequency 20PF Load Capacitance KYX KBD1105A2030

Price Negotiable

Price: Negotiable

MOQ: Negotiable

Delivery Time: Negotiable

Product Description

- HC-49USSMD/11.0592 MHZ

HC-49USSMD/11.0592 MHZ

: (Kaiyuexiang)
:
: HC-49USSMD/11.0592 MHZ
: KBD1105A2030



	HC-49USSMD/11.0592 MHZ
	20PF/30ppm
	KBD1105A2030
HOLDER TYPE	HC-49USSMD
MODE OF VIBRATION	AT CUT
OSCILLATION MODE	FUND S&A
TEST FACILITIES	KH-1240
STORAGE TEMPERATURE	-40TO +85
DRIVER LEVEL	100W
NORMAL FREQUENCY	11.0592 MHz
FREQUENCY TOLERANCE252	30ppm
TEMPERATURE STABILITY	20ppm
OPERATING TEMPERATURE RANGE	-20TO + 70
LOAD CAPACITANCE	20 PF
MOTIONAL CAPACITANE	3PF MAX
SHUNT CAPACITANCE
EFFECTIVE SERIES RESISTANCE	80MAX
INSULATION RESISTANCE	500M OHMS MIN	AT DC 100V
SOLDERABILITY	95%COVERAGE BY USING 90/10 SOLD AT 245FOR 5 SEC. DIPING AFTER IMMERSION IN ALPHA 611 FLUX FOR 5 SEC.
SHOCK	Electrical characteristics shall be satisfied after dropping three time from the height of 50 cm onto Hard wooden board.
VIBRATION	Electrical characteristics shall be satisfied after supplying following Vibration.
VIBRATION FREQUENCY	1055Hz
REPEATED PERIOD	12min
FULL CYCLE	1.5mm PP
DIRECTION	X.Y.Z
TIME	2hours/each direction
STRENGTH OF TERMINALS/LEADWIRES - PULLING	Electrical characteristics shall be satisfied after 900g of tension weight shall be supplied gradually to axial direction of terminals/lead-wires for 30 sec. No visual damages.
STRENGTH OF TERMINALS/LEADWIRES - BENDING	Electrical characteristics shall be satisfied after 90degree bending with 225gs tension weight. No visual damages.
SEALING TIGHTNESS	No observation of gas bubble after specimen put in hot water at +90+95for 5 min.
SOLDERING DIP	Terminals/lead-wires shall be dipped into solder melted tank at +2305 for 3sec. Dipping depth shall be 2mm from the bottom of specimens body. Soldering portion shall be covered in over 90% of terminals/lead-wires dipped.
SOLDER HEATING	Electrical characteristics shall be satisfied after dipping depth shall be 2mm from edge of terminals/lead-wires in solder melted tank at +35010 for 3 sec.
HUMIDITY	Electrical characteristics shall be satisfied after letting it alone at 602 in humidity of 9095% for 250 hours.
STORAGE IN LOW TEMPERATURE	Electrical characteristics shall be satisfied after letting it alone at -302 for 250 hours.
STORAGE IN HIGH TEMPERATURE	Electrical characteristics shall be satisfied after letting it alone at +852 for 250 hours.
TEMPERATURE CYCLE	Electrical characteristics shall be satisfied after supplying the following temperature cycle (3cycles). Temperature shift from low to high, high to low shall be done in 1/min.