Surface mount device quartz crystal resonator KYX KBD300002020 30 MHz frequency 20ppm temperature stability

Price Negotiable

Price: Negotiable

MOQ: Negotiable

Delivery Time: Negotiable

Product Description

Product Overview

The Kaiyuexiang Industrial Quartz Crystal Resonator, model 49USSMD/30.000MHZ, is a high-precision electronic component designed for oscillation applications. It features a frequency of 30.000MHz with a frequency tolerance of 10ppm and a temperature stability of 20ppm. This SMD (Surface Mount Device) component is suitable for a wide range of electronic circuits requiring stable and accurate frequency generation.

Product Attributes

Brand: (Kaiyuexiang Industrial)
Origin: Shenzhen, China
Product Name: (Quartz Crystal Resonator)
Product Model: 49USSMD/30.000MHZ
Original Manufacturer Model: KBD300002020

Technical Specifications

Parameter	Specification
Normal Frequency	30.000MHz
Frequency Tolerance (252)	10ppm
Temperature Stability	20ppm
Operating Temperature Range	-20 TO +70
Load Capacitance	20PF
Motional Capacitance	7PF MAX
Shunt Capacitance	40MAX
Effective Series Resistance	500M OHMS MIN AT DC 100V
Insulation Resistance	AT DC 100V
Holder Type	49USSMD
Mode of Vibration	AT CUT
Oscillation Mode	FUND S&A
Test Facilities	KH-1240
Storage Temperature	-40 TO +85
Driver Level	100W
Solderability	95% COVERAGE BY USING 90/10 SOLD AT 245FOR 5 SEC. DIPING AFTER IMMERSION IN ALPHA 611 FLUX FOR 5 SEC.
Shock Test	Electrical characteristics shall be satisfied after dropping three times from the height of 50 cm onto Hard wooden board.
Vibration Test	Frequency: 1055Hz, Period: 12min, Full Amplitude: 1.5mm P-P, Direction: X.Y.Z, Time: 2hours/each direction. Electrical characteristics shall be satisfied.
Strength of Terminals/Lead-wires (Pulling)	900g of tension weight shall be supplied gradually to axial direction of terminals/lead-wires for 30 sec. No visual damages.
Strength of Terminals/Lead-wires (Bending)	90 bending with 225g tension weight, then straightened. Repeated to opposite direction. No visual damages.
Sealing Tightness	No observation of gas bubble after specimen put in hot water at +90+95 for 5 min.
Soldering Dip	Terminals/lead-wires dipped into solder melted tank at +2305 for 3sec. Dipping depth 2mm from bottom of body. Soldering portion over 90%.
Solder Heating	Terminals/lead-wires dipped into solder melted tank at +35010 for 3 sec. Electrical characteristics shall be satisfied.
Humidity Test	Electrical characteristics shall be satisfied after 250 hours at 602 in 90-95% humidity.
Storage in Low Temperature	Electrical characteristics shall be satisfied after 250 hours at -302.
Storage in High Temperature	Electrical characteristics shall be satisfied after 250 hours at +852.
Temperature Cycle Test	Electrical characteristics shall be satisfied after 3 cycles with temperature shift rate of 1/min.