Electronic Component KYX KUS184322030 18.432 MHz Crystal Oscillator HC 49SJJ 20PF 30ppm Frequency

Name: Electronic Component KYX KUS184322030 18.432 MHz Crystal Oscillator HC 49SJJ 20PF 30ppm Frequency
Brand: Beijing Silk Road Enterprise Management Services Co., Ltd.

Price Negotiable

Price: Negotiable

MOQ: Negotiable

Delivery Time: Negotiable

Product Description

HC-49SJJ/18.432MHZ

KUS184322030

20PF/30ppm

HC-49SJJ/18.432MHZ

(Kaiyuexiang)
()



HOLDER TYPE	49US AT CUT
MODE OF VIBRATION	FUND
OSCILLATION MODE	S&A
TEST FACILITIES	KH-1240
STORAGE TEMPERATURE	-40 TO +85
DRIVER LEVEL	100W

NORMAL FREQUENCY	18.432 MHz
FREQUENCY TOLERANCE252	30ppm
TEMPERATURE STABILITY	20ppm
OPERATING TEMPERATURE RANGE	-20 TO +70
LOAD CAPACITANCE	20 PF
MOTIONAL CAPACITANE	3PF MAX
SHUNT CAPACITANCE
EFFECTIVE SERIES RESISTANCE	60 MAX
INSULATION RESISTANCE	500M OHMS MIN AT DC 100V

SOLDERABILITY	95%COVERAGE BY USING 90/10 SOLD AT 245FOR 5 SEC. DIPING AFTER IMMERSION IN ALPHA 611 FLUX FOR 5 SEC.
MECHANICAL ENDURANCE - SHOCK	Electrical characteristics shall be satisfied after dropping three time from the height of 50 cm onto Hard wooden board.
MECHANICAL ENDURANCE - VIBRATION	Electrical characteristics shall be satisfied after supplying following Vibration: (1)VIBRATION FREQUENCY 1055Hz (2)REPEATED PERIOD 12min (3)FULL CYCLE 1.5mm PP (4)DIRECTION X.Y.Z (5)TIME 2hours/each direction
MECHANICAL ENDURANCE - STRENGTH OF TERMINALS/LEADWIRES - PULLING	a)Body of specimen shall be fixed, and 900g of tension weight shall be supplied gradually to axial direction of terminals/lead-wires for 30 sec. b)After above test a), there is no observation of any visual damages on the specimen.
MECHANICAL ENDURANCE - STRENGTH OF TERMINALS/LEADWIRES - BENDING	a)Body of specimen shall be fixed, and 90degree bending shall be given, being supplied 225gs tension weight. After that, terminals/lead-wires shall be straightened gradually. Then the same bending and straightening shall be supplied to the opposite direction in the same axial. b)After above test a), there is no observation of any visual damages on the specimen.
MECHANICAL ENDURANCE - SEALING TIGHTNESS	There is no observation of gas bubble after specimen put in hot water at +90+95for 5 min.
MECHANICAL ENDURANCE - SOLDERING DIP	Terminals/lead-wires of specimen shall be dipped into solder melted tank at +2305 for 3sec. Dipping depth shall be 2mm from the bottom of specimens body. (After applying ROSIN flux) Soldering portion shall be covered in over 90% of terminals/lead-wires dipped.
MECHANICAL ENDURANCE - SOLDER HEATING	Terminals/lead-wires of specimen shall be dipped into solder melted tank at +35010 for 3 sec. Electrical characteristics shall be satisfied after dipping depth shall be 2mm from edge of terminals/lead-wires.

HUMIDITY	Electrical characteristics shall be satisfied after letting it alone at 602in humidity of 9095% for 250 hours.
STORAGE IN LOW TEMPERATURE	Electrical characteristics shall be satisfied after letting it alone at -302for 250 hours.
STORAGE IN HIGH TEMPERATURE	Electrical characteristics shall be satisfied after letting it alone at +852for 250 hours.
TEMPERATURE CYCLE	Electrical characteristics shall be satisfied after supplying the following temperature cycle (3cycles). Temperature shift from low to high, high to low shall be done in 1/min.