8 MHz Crystal Oscillator HC 49SJJ with 95 Percent Solderability and Dip Soldering KYX KUS080001220

Name: 8 MHz Crystal Oscillator HC 49SJJ with 95 Percent Solderability and Dip Soldering KYX KUS080001220
Brand: Beijing Silk Road Enterprise Management Services Co., Ltd.

Price Negotiable

Price: Negotiable

MOQ: Negotiable

Delivery Time: Negotiable

Product Description

(HC-49SJJ/8.000MHZ)

HC-49SJJ/8.000MHZ

: (Kaiyuexiang)
:
:
: HC-49SJJ/8.000MHZ
: KUS080001220


	Holder Type	49US AT CUT
	Mode of Vibration	FUND
	Oscillation Mode	S&A
	Test Facilities	KH-1240
	Storage Temperature	-40 TO +85
	Driver Level	100W
	Normal Frequency	8.000 MHz
	Frequency Tolerance (252)	20ppm
	Temperature Stability	20ppm
	Operating Temperature Range	-20 TO +70
	Load Capacitance	12 PF
	Motional Capacitance	3PF MAX
	Shunt Capacitance	250 MAX
	Effective Series Resistance	500M OHMS MIN
	Insulation Resistance	AT DC 100V
	Solderability	95% COVERAGE BY USING 90/10 SOLD AT 245FOR 5 SEC. DIPING AFTER IMMERSION IN ALPHA 611 FLUX FOR 5 SEC.
	Mechanical Endurance - Shock	Electrical characteristics shall be satisfied after dropping three time from the height of 50 cm onto Hard wooden board.
	Mechanical Endurance - Vibration	Frequency: 1055Hz, Period: 12min, Amplitude: 1.5mm P-P, Direction: X.Y.Z, Time: 2hours/each direction. Electrical characteristics shall be satisfied after supplying following Vibration.
	Mechanical Endurance - Strength of Terminals/Lead-wires (Pulling)	Body of specimen shall be fixed, and 900g of tension weight shall be supplied gradually to axial direction of terminals/lead-wires for 30 sec. No visual damages after test.
	Mechanical Endurance - Strength of Terminals/Lead-wires (Bending)	Body of specimen shall be fixed, and 90degree bending shall be given, being supplied 225gs tension weight. Then straightened gradually. Same bending and straightening to the opposite direction. No visual damages after test.
	Mechanical Endurance - Sealing Tightness	No observation of gas bubble after specimen put in hot water at +90+95 for 5 min.
	Mechanical Endurance - Soldering Dip	Terminals/lead-wires shall be dipped into solder melted tank at +2305 for 3sec. Dipping depth 2mm from the bottom of specimens body. Soldering portion shall be covered in over 90% of terminals/lead-wires dipped.
	Mechanical Endurance - Solder Heating	Terminals/lead-wires shall be dipped into solder melted tank at +35010 for 3 sec. Electrical characteristics shall be satisfied. Dipping depth 2mm from edge of terminals/lead-wires.
	Humidity	Electrical characteristics shall be satisfied after letting it alone at 602 in humidity of 9095% for 250 hours.
	Storage in Low Temperature	Electrical characteristics shall be satisfied after letting it alone at -302 for 250 hours.
	Storage in High Temperature	Electrical characteristics shall be satisfied after letting it alone at +852 for 250 hours.
	Temperature Cycle	Electrical characteristics shall be satisfied after supplying the following temperature cycle (3cycles). Temperature shift from low to high, high to low shall be done in 1/min.