Quartz Crystal Resonator with 11.2896 MHz frequency and 20PF load capacitance KYX KSD1128A2030 model

Price Negotiable

Price: Negotiable

MOQ: Negotiable

Delivery Time: Negotiable

Product Description

Product Overview

This product is a Quartz Crystal Resonator, model HC-49USSMD/11.2896 MHZ, manufactured by Shenzhen Kaiyuexiang Electronics Co., Ltd. It features a frequency of 11.2896 MHz with a tolerance of 30ppm and a load capacitance of 20PF.

Product Attributes

Brand: (Kaiyuexiang)
Origin: Shenzhen, China
Product Name: (Quartz Crystal Resonator)
Manufacturer: (Shenzhen Kaiyuexiang Electronics Co., Ltd.)

Technical Specifications

Product Model	Normal Frequency	Frequency Tolerance (252)	Temperature Stability	Operating Temperature Range	Load Capacitance	Motional Capacitance	Effective Series Resistance	Insulation Resistance	Holder Type	Mode of Vibration	Oscillation Mode	Driver Level
HC-49USSMD/11.2896 MHZ	11.2896 MHz	30ppm	20ppm	-20 TO + 70	20 PF	5PF MAX	80MAX	500M OHMS MIN AT DC 100V	HC-49USSMD	AT CUT	FUND S&A	100W

Mechanical Parameters

Test Item	Condition	Requirement
Solderability	95% coverage by using 90/10 sold at 245 for 5 sec. Dipping after immersion in ALPHA 611 flux for 5 sec.	-
Shock	Electrical characteristics shall be satisfied after dropping three times from the height of 50 cm onto Hard wooden board.	Electrical characteristics shall be satisfied.
Vibration	Frequency: 1055Hz, Period: 12min, Amplitude: 1.5mm PP, Direction: X.Y.Z, Time: 2 hours/each direction.	Electrical characteristics shall be satisfied.
Strength of Terminals/Lead-wires (Pulling)	Body of specimen shall be fixed, and 900g of tension weight shall be supplied gradually to axial direction of terminals/lead-wires for 30 sec. No visual damages.	No visual damages.
Strength of Terminals/Lead-wires (Bending)	Body of specimen shall be fixed, and 90degree bending shall be given, being supplied 225gs tension weight. Then straightened gradually. Same bending and straightening to the opposite direction. No visual damages.	No visual damages.
Sealing Tightness	Specimen put in hot water at +90+95 for 5 min.	No gas bubble.
Soldering Dip	Terminals/lead-wires dipped into solder melted tank at +2305 for 3sec. Dipping depth: 2mm from the bottom of specimens body. (After applying ROSIN flux)	Soldering portion shall be covered in over 90% of terminals/lead-wires dipped.
Solder Heating	Terminals/lead-wires dipped into solder melted tank at +35010 for 3-4 sec. Dipping depth: 2mm from edge of terminals/lead-wires.	Electrical characteristics shall be satisfied.

Environmental Endurance

Test Item	Condition	Requirement
Humidity	602, 9095% humidity for 250 hours.	Electrical characteristics shall be satisfied.
Storage in Low Temperature	-302 for 250 hours.	Electrical characteristics shall be satisfied.
Storage in High Temperature	+852 for 250 hours.	Electrical characteristics shall be satisfied.
Temperature Cycle	3 cycles. Temperature shift from low to high, high to low shall be done in 1/min.	Electrical characteristics shall be satisfied.