13.560 MHz Quartz Crystal Resonator Frequency Stability 20ppm KYX KSS135602030 with 30ppm Tolerance

Name: 13.560 MHz Quartz Crystal Resonator Frequency Stability 20ppm KYX KSS135602030 with 30ppm Tolerance
Brand: Beijing Silk Road Enterprise Management Services Co., Ltd.

Price Negotiable

Price: Negotiable

MOQ: Negotiable

Delivery Time: Negotiable

Product Description

- 49USS/13.560MHZ

49USS/13.560MHZ

: (Kaiyuexiang)
:
: www.kaiyuexiang.com
: KSS135602030


		PRODUCT NAME	QUARTZ CRYSTAL RESONATOR
	49USS/13.560MHZ	PRODUCT MODEL	49USS/13.560MHZ
	13.560 MHz	NORMAL FREQUENCY	13.560 MHz
(252)	30ppm	FREQUENCY TOLERANCE (252)	30ppm
	20ppm	TEMPERATURE STABILITY	20ppm
	-20 TO +70	OPERATING TEMPERATURE RANGE	-20 TO +70
	20 PF	LOAD CAPACITANCE	20 PF
	5PF MAX	SHUNT CAPACITANCE	5PF MAX
	60 MAX	EFFECTIVE SERIES RESISTANCE	60 MAX
	500M OHMS MIN AT DC 100V	INSULATION RESISTANCE	500M OHMS MIN AT DC 100V
	FUND S&A	MODE OF VIBRATION	FUND S&A
	KH-1240	OSCILLATION MODE	KH-1240
	100W	DRIVER LEVEL	100W
	-40 TO +85	STORAGE TEMPERATURE	-40 TO +85
	95%90/102455ALPHA 6115	SOLDERABILITY	95% COVERAGE BY USING 90/10 SOLD AT 245 FOR 5 SEC. DIPING AFTER IMMERSION IN ALPHA 611 FLUX FOR 5 SEC.
-	900g30	STRENGTH OF TERMINALS/LEADWIRES - PULLING	Body of specimen shall be fixed, and 900g of tension weight shall be supplied gradually to axial direction of terminals/lead-wires for 30 sec. After above test, there is no observation of any visual damages on the specimen.
-	90225g	STRENGTH OF TERMINALS/LEADWIRES - BENDING	Body of specimen shall be fixed, and 90degree bending shall be given, being supplied 225gs tension weight. After that, terminals/lead-wires shall be straightened gradually. Then the same bending and straightening shall be supplied to the opposite direction in the same axial. After above test, there is no observation of any visual damages on the specimen.
	+90+955	SEALING TIGHTNESS	There is no observation of gas bubble after specimen put in hot water at +90+95 for 5 min.
	+230532mm90%	SOLDERING DIP	Terminals/lead-wires of specimen shall be dipped into solder melted tank at +2305 for 3sec. Dipping depth shall be 2mm from the bottom of specimens body. Soldering portion shall be covered in over 90% of terminals/lead-wires dipped.
	+350103-4	SOLDER HEATING	Terminals/lead-wires of specimen shall be dipped into solder melted tank at +35010 for 3 sec. Electrical characteristics shall be satisfied after dipping depth shall be 2mm from edge of terminals/lead-wires.
	60290-95%250	HUMIDITY	Electrical characteristics shall be satisfied after letting it alone at 602 in humidity of 9095% for 250 hours.
	-302250	STORAGE IN LOW TEMPERATURE	Electrical characteristics shall be satisfied after letting it alone at -302 for 250 hours.
	+852250	STORAGE IN HIGH TEMPERATURE	Electrical characteristics shall be satisfied after letting it alone at +852 for 250 hours.
	31/min	TEMPERATURE CYCLE	Electrical characteristics shall be satisfied after supplying the following temperature cycle (3cycles). Temperature shift from low to high, high to low shall be done in 1/min.