Crystal Oscillator 27 MHz 18 PF Load Capacitance Temperature Stability 20ppm KYX KUS270001830 Component

Price Negotiable

Price: Negotiable

MOQ: Negotiable

Delivery Time: Negotiable

Product Description

HC-49SJJ/27.000MHZ

KUS270001830

18PF/30ppm

0755-89315823, 89315866
0755-89315223
www.kaiyuexiang.com

Technical Specifications

Parameter	Description	Value
GENERAL	HOLDER TYPE	49US AT CUT
	MODE OF VIBRATION	FUND S&A
	OSCILLATION MODE	KH-1240
	TEST FACILITIES	-40TO +85
	STORAGE TEMPERATURE	100W
	DRIVER LEVEL

ELECTRICAL PARAMETER	NORMAL FREQUENCY	27.000 MHz
	FREQUENCY TOLERANCE252	30ppm
	TEMPERATURE STABILITY	20ppm
	OPERATING TEMPERATURE RANGE	-20TO +70
	LOAD CAPACITANCE	18 PF
	MOTIONAL CAPACITANE	3PF MAX
	SHUNT CAPACITANCE	40 MAX
	INSULATION RESISTANCE	500M OHMS MIN AT DC 100V
MECHANICAL PARAMETER	SOLDERABILITY	95%COVERAGE BY USING 90/10 SOLD AT 245FOR 5 SEC. DIPING AFTER IMMERSION IN ALPHA 611 FLUX FOR 5 SEC.
	MECHANICAL ENDURANCE - SHOCK	Electrical characteristics shall be satisfied after dropping three time from the height of 50 cm onto Hard wooden board.
	MECHANICAL ENDURANCE - VIBRATION	(1)VIBRATION FREQUENCY 1055Hz (2)REPEATED PERIOD 12min (3)FULL CYCLE 1.5mm PP (4)DIRECTION X.Y.Z (5)TIME 2hours/each direction
	MECHANICAL ENDURANCE - STRENGTH OF TERMINALS/LEADWIRES (PULLING)	Body of specimen shall be fixed, and 900g of tension weight shall be supplied gradually to axial direction of terminals/lead-wires for 30 sec. After above test a), there is no observation of any visual damages on the specimen.
	MECHANICAL ENDURANCE - STRENGTH OF TERMINALS/LEADWIRES (BENDING)	Body of specimen shall be fixed, and 90degree bending shall be given, being supplied 225gs tension weight. After that, terminals/lead-wires shall be straightened gradually. Then the same bending and straightening shall be supplied to the opposite direction in the same axial. After above test a), there is no observation of any visual damages on the specimen.
ENVIRONMENTAL ENDURANCE	HUMIDITY	Electrical characteristics shall be satisfied after letting it alone at 602in humidity of 9095% for 250 hours.
	STORAGE IN LOW TEMPERATURE	Electrical characteristics shall be satisfied after letting it alone at -302for 250 hours.
	STORAGE IN HIGH TEMPERATURE	Electrical characteristics shall be satisfied after letting it alone at +852for 250 hours.
	TEMPERATURE CYCLE	Electrical characteristics shall be satisfied after supplying the following temperature cycle (3cycles). Temperature shift from low to high, high to low shall be done in 1/min.