Electronic Component KYX KSS120002020 Quartz Crystal Resonator 12 MHz Frequency with 20ppm Tolerance

Price Negotiable

Price: Negotiable

MOQ: Negotiable

Delivery Time: Negotiable

Product Description

Product Overview

This specification details the 49USS/12.000MHZ Quartz Crystal Resonator from Shenzhen Kaiyuexiang Electronics Co., Ltd. It is designed for applications requiring precise frequency control.

Product Attributes

Brand: Kaiyuexiang
Origin: Shenzhen, China
Product Name: Quartz Crystal Resonator
Product Model: 49USS/12.000MHZ
Original Model: KSS120002020
Manufacturer: Shenzhen Kaiyuexiang Electronics Co., Ltd.

Technical Specifications

Parameter	Value
Normal Frequency	12.000 MHz
Frequency Tolerance (252)	20ppm
Temperature Stability	20ppm
Operating Temperature Range	-20 TO +70
Load Capacitance	20 PF
Motional Capacitance	5pF MAX
Shunt Capacitance	N/A
Effective Series Resistance	80 MAX
Insulation Resistance	500M OHMS MIN at DC 100V
Holder Type	49USS
Mode of Vibration	AT CUT
Oscillation Mode	FUND
Test Facilities	S&A KH-1240
Storage Temperature	-40 TO +85
Driver Level	100W
Solderability	95% COVERAGE BY USING 90/10 SOLD AT 245 FOR 5 SEC. DIPING AFTER IMMERSION IN ALPHA 611 FLUX FOR 5 SEC.
Mechanical Endurance - Shock	Electrical characteristics shall be satisfied after dropping three times from the height of 50 cm onto Hard wooden board.
Mechanical Endurance - Vibration Frequency	1055Hz
Mechanical Endurance - Vibration Period	12min
Mechanical Endurance - Vibration Full Amplitude	1.5mm PP
Mechanical Endurance - Vibration Direction	X.Y.Z
Mechanical Endurance - Vibration Time	2 hours/each direction
Mechanical Endurance - Terminals/Lead-wires Strength - Pulling	Body of specimen shall be fixed, and 900g of tension weight shall be supplied gradually to axial direction of terminals/lead-wires for 30 sec. No visual damages.
Mechanical Endurance - Terminals/Lead-wires Strength - Bending	Body of specimen shall be fixed, and 90degree bending shall be given, being supplied 225gs tension weight. No visual damages.
Mechanical Endurance - Sealing Tightness	No observation of gas bubble after specimen put in hot water at +90+95 for 5 min.
Mechanical Endurance - Soldering Dip	Terminals/lead-wires of specimen shall be dipped into solder melted tank at +2305 for 3sec. Dipping depth shall be 2mm from the bottom of specimens body. Soldering portion shall be covered in over 90% of terminals/lead-wires dipped.
Mechanical Endurance - Solder Heating	Terminals/lead-wires of specimen shall be dipped into solder melted tank at +35010 for 3 sec. Electrical characteristics shall be satisfied.
Environmental Endurance - Humidity	Electrical characteristics shall be satisfied after letting it alone at 602 in humidity of 9095% for 250 hours.
Environmental Endurance - Storage in Low Temperature	Electrical characteristics shall be satisfied after letting it alone at -302 for 250 hours.
Environmental Endurance - Storage in High Temperature	Electrical characteristics shall be satisfied after letting it alone at +852 for 250 hours.
Environmental Endurance - Temperature Cycle	Electrical characteristics shall be satisfied after supplying the following temperature cycle (3 cycles). Temperature shift from low to high, high to low shall be done in 1/min.