Stable Frequency Quartz Crystal Resonator KYX KSD1352A2030 1352127 MHz 30ppm Tolerance SMD Package
Price:
Negotiable
MOQ:
Negotiable
Delivery Time:
Negotiable
Product Description
Product Overview
The HC-49USSMD/13.52127 MHZ is a Quartz Crystal Resonator manufactured by Shenzhen Kaiyuexiang Electronics Co., Ltd. It features a frequency of 13.52127 MHz with a frequency tolerance of 30ppm and a load capacitance of 20pF. This SMD-type resonator is designed for applications requiring stable frequency control.
Product Attributes
- Brand: Kaiyuexiang
- Origin: Shenzhen, China
- Product Name: Quartz Crystal Resonator
- Product Model: HC-49USSMD/13.52127 MHZ
- Original Factory Model: KSD1352A2030
Technical Specifications
| Parameter | Value | Unit | Notes |
|---|---|---|---|
| Normal Frequency | 13.52127 | MHz | |
| Frequency Tolerance (252) | 30 | ppm | |
| Temperature Stability | 20 | ppm | |
| Operating Temperature Range | -20 to +70 | ||
| Load Capacitance | 20 | PF | |
| Motional Capacitance | 3 | PF | MAX |
| Shunt Capacitance | |||
| Effective Series Resistance | 60 | MAX | |
| Insulation Resistance | 500 | M OHMS | MIN AT DC 100V |
| Holder Type | HC-49USSMD | AT CUT | |
| Mode of Vibration | FUND | S&A | |
| Oscillation Mode | KH-1240 | ||
| Storage Temperature | -40 to +85 | ||
| Driver Level | 100 | W | |
| Solderability | 95% COVERAGE BY USING 90/10 SOLD AT 245FOR 5 SEC. DIPING AFTER IMMERSION IN ALPHA 611 FLUX FOR 5 SEC. | ||
| Shock Test | Electrical characteristics shall be satisfied after dropping three time from the height of 50 cm onto Hard wooden board. | ||
| Vibration Test | Frequency: 1055Hz, Period: 12min, Full Amplitude: 1.5mm PP, Direction: X.Y.Z, Time: 2hours/each direction | Electrical characteristics shall be satisfied after supplying following Vibration. | |
| Strength of Terminals/Lead-wires - Pulling Test | 900g tension weight for 30 sec. | Body of specimen shall be fixed, and 900g of tension weight shall be supplied gradually to axial direction of terminals/lead-wires for 30 sec. After above test a), there is no observation of any visual damages on the specimen. | |
| Strength of Terminals/Lead-wires - Bending Test | 90degree bending with 225gs tension weight. | Body of specimen shall be fixed, and 90degree bending shall be given, being supplied 225gs tension weight. After that, terminals/lead-wires shall be straightened gradually. Then the same bending and straightening shall be supplied to the opposite direction in the same axial. After above test a), there is no observation of any visual damages on the specimen. | |
| Sealing Tightness | No gas bubble after specimen put in hot water at +90+95 for 5 min. | ||
| Soldering Dip | Terminals/lead-wires dipped into solder melted tank at +2305 for 3sec. Dipping depth 2mm from bottom of specimens body. Soldering portion over 90% of terminals/lead-wires dipped. | (After applying ROSIN flux) | |
| Solder Heating | Terminals/lead-wires dipped into solder melted tank at +35010 for 3 sec. Dipping depth 2mm from edge of terminals/lead-wires. | Electrical characteristics shall be satisfied after dipping. | |
| Humidity Test | Electrical characteristics shall be satisfied after letting it alone at 602 in humidity of 9095% for 250 hours. | ||
| Storage in Low Temperature | Electrical characteristics shall be satisfied after letting it alone at -302 for 250 hours. | ||
| Storage in High Temperature | Electrical characteristics shall be satisfied after letting it alone at +852 for 250 hours. | ||
| Temperature Cycle | Electrical characteristics shall be satisfied after supplying the following temperature cycle (3 cycles). Temperature shift from low to high, high to low shall be done in 1/min. | (Refer to Fig-2) |
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
Beijing Silk Road Enterprise Management Services Co., Ltd.
Location
16 Floor, Unit B, Jiatai International Mansion, No 41, Dongsihuan Zhong Road, Chaoyang District, Beijing
Contact Person
Sellina