Quartz crystal resonator KYX KBD120002010 HC 49USSMD 12 MHz frequency for in communication electronics

Price Negotiable

Price: Negotiable

MOQ: Negotiable

Delivery Time: Negotiable

Product Description

Product Overview

This document details the specifications for the HC-49USSMD Quartz Crystal Resonator from Kaiyuexiang Electronics Co., Ltd. It is designed for applications requiring precise frequency control.

Product Attributes

Brand: Kaiyuexiang
Origin: Shenzhen, China
Product Name: Quartz Crystal Resonator
Product Model: HC-49USSMD/12.000 MHZ
Original Model: KBD120002010
Technical Department: Dong Zongquan

Technical Specifications

Parameter	Specification	Unit
Holder Type	HC-49USSMD
Mode of Vibration	AT CUT
Oscillation Mode	FUND S&A
Driver Level	100W
Normal Frequency	12.000	MHz
Frequency Tolerance (252)	10	ppm
Temperature Stability	20	ppm
Operating Temperature Range	-20 TO + 70
Load Capacitance	20	PF
Motional Capacitance	3	PF MAX
Shunt Capacitance
Effective Series Resistance	80	MAX
Insulation Resistance	500M OHMS MIN	AT DC 100V
Solderability	95% COVERAGE BY USING 90/10 SOLD AT 245FOR 5 SEC. DIPING AFTER IMMERSION IN ALPHA 611 FLUX FOR 5 SEC.
Shock Test	Electrical characteristics shall be satisfied after dropping three time from the height of 50 cm onto Hard wooden board.
Vibration Test	Frequency: 1055Hz, Period: 12min, Full Amplitude: 1.5mm P-P, Direction: X.Y.Z, Time: 2hours/each direction
Strength of Terminals/Lead-wires - Pulling Test	900g of tension weight shall be supplied gradually to axial direction of terminals/lead-wires for 30 sec. No visual damages.
Strength of Terminals/Lead-wires - Bending Test	90degree bending with 225gs tension weight. No visual damages.
Sealing Tightness	No observation of gas bubble after specimen put in hot water at +90+95 for 5 min.
Soldering Dip Test	Terminals/lead-wires dipped into solder melted tank at +2305 for 3sec. Dipping depth 2mm from bottom of specimens body. Soldering portion over 90%.
Solder Heating Test	Terminals/lead-wires dipped into solder melted tank at +35010 for 3-4 sec. Electrical characteristics shall be satisfied.
Humidity Test	Electrical characteristics shall be satisfied after letting it alone at 602 in humidity of 9095% for 250 hours.
Storage in Low Temperature Test	Electrical characteristics shall be satisfied after letting it alone at -302 for 250 hours.
Storage in High Temperature Test	Electrical characteristics shall be satisfied after letting it alone at +852 for 250 hours.
Temperature Cycle Test	Electrical characteristics shall be satisfied after supplying the following temperature cycle (3cycles). Temperature shift 1/min.