12 MHz Crystal Oscillator with 22 PF Load Capacitance and 30ppm Frequency Tolerance KYX KUS120002230

Price Negotiable

Price: Negotiable

MOQ: Negotiable

Delivery Time: Negotiable

Product Description

49US/12.000MHZ

KUS120002230

22PF/30ppm

0755-89315823, 89315866

0755-89315223

www.kaiyuexiang.com


1. GENERAL ()
HOLDING TYPE ()	49US
MODE OF VIBRATION ()	AT CUT
OSCILLATION MODE ()	FUND S&A
TEST FACILITIES ()	KH-1240
STORAGE TEMPERATURE ()	-40 TO +85
DRIVER LEVEL ()	100W
2. ELECTRICAL PARAMETER ()
NORMAL FREQUENCY ()	12.000 MHz
FREQUENCY TOLERANCE (252) ()	30ppm
TEMPERATURE STABILITY ()	20ppm
OPERATING TEMPERATURE RANGE ()	-20 TO +70
LOAD CAPACITANCE ()	22 PF
MOTIONAL CAPACITANCE ()	5PF MAX
SHUNT CAPACITANCE ()
EFFECTIVE SERIES RESISTANCE ()	80 MAX
INSULATION RESISTANCE ()	500M OHMS MIN AT DC 100V
3. MECHANICAL PARAMETER ()
SOLDERABILITY ()	95% COVERAGE BY USING 90/10 SOLD AT 245FOR 5 SEC. DIPING AFTER IMMERSION IN ALPHA 611 FLUX FOR 5 SEC.
Mechanical Endurance ()
SHOCK ()	Electrical characteristics shall be satisfied after dropping three time from the height of 50 cm onto Hard wooden board.	50 cm 3
VIBRATION ()	VIBRATION FREQUENCY: 1055Hz, REPEATED PERIOD: 12min, FULL CYCLE: 1.5mm PP, DIRECTION: X.Y.Z, TIME: 2hours/each direction	: 1055Hz, : 12min, : 1.5mm PP, : X.Y.Z, : 2/
STRENGTH OF TERMINALS/LEADWIRES ()	PULLING: 900g tension weight for 30 sec. BENDING: 90degree bending with 225gs tension weight.	: 900g /30 : 90o 225g 90 o
SEALING TIGHTNESS ()	No gas bubble after specimen put in hot water at +90+95 for 5 min.	+90+955
SOLDERING DIP ()	Terminals/lead-wires dipped into solder melted tank at +2305 for 3sec. Dipping depth 2mm from the bottom of specimens body. Soldering portion over 90% of terminals/lead-wires dipped.	+23053 2mm90
SOLDER HEATING ()	Terminals/lead-wires dipped into solder melted tank at +35010 for 3 sec. Dipping depth 2mm from edge of terminals/lead-wires.	+350103-4 2mm
Environmental Endurance ()
HUMIDITY ()	Electrical characteristics shall be satisfied after letting it alone at 602 in humidity of 9095% for 250 hours.	6029095%250
STORAGE IN LOW TEMPERATURE ()	Electrical characteristics shall be satisfied after letting it alone at -302 for 250 hours.	-302250
STORAGE IN HIGH TEMPERATURE ()	Electrical characteristics shall be satisfied after letting it alone at +852 for 250 hours.	+852250
TEMPERATURE CYCLE ()	Electrical characteristics shall be satisfied after supplying the following temperature cycle (3cycles). Temperature shift from low to high, high to low shall be done in 1/min.	3 1/