25 MHz Crystal Oscillator HC 49SJJ with 16PF Load Capacitance and Stable Performance KYX KUS250001610
Price:
Negotiable
MOQ:
Negotiable
Delivery Time:
Negotiable
Product Description
HC-49SJJ/25.000MHZ
KUS250001610
16PF/10ppm
TEL0755-89315823 89315866 FAX0755-89315223
www.kaiyuexiang.com
HC-49SJJ/25.000MHZ16PF/10ppm
- (Kaiyuexiang)
| 1. GENERAL () | ||
| HOLDER TYPE () | 49US | AT CUT |
| MODE OF VIBRATION () | FUND | |
| OSCILLATION MODE () | S&A | |
| TEST FACILITIES () | KH-1240 | |
| STORAGE TEMPERATURE () | -40 TO +85 | |
| DRIVER LEVEL () | 100W | |
| 2. ELECTRICAL PARAMETER () | ||
| NORMAL FREQUENCY () | 25.000 MHz | |
| FREQUENCY TOLERANCE () | 10ppm | (252) |
| TEMPERATURE STABILITY () | 20ppm | |
| OPERATING TEMPERATURE RANGE () | -20 TO +70 | |
| LOAD CAPACITANCE () | 16 PF | |
| MOTIONAL CAPACITANCE () | 3PF MAX | |
| SHUNT CAPACITANCE () | ||
| EFFECTIVE SERIES RESISTANCE () | 40 MAX | |
| INSULATION RESISTANCE () | 500M OHMS MIN | AT DC 100V |
| 3. MECHANICAL PARAMETER () | ||
| SOLDERABILITY () | 95% COVERAGE BY USING 90/10 SOLD AT 245 FOR 5 SEC. DIPING AFTER IMMERSION IN ALPHA 611 FLUX FOR 5 SEC. | |
| MECHANICAL ENDURANCE () | Provided that measurement shall be carried out after letting it alone in the room temperature for 1 hour. | |
| SHOCK () | Electrical characteristics shall be satisfied after dropping three time from the height of 50 cm onto Hard wooden board. | |
| VIBRATION () | Electrical characteristics shall be satisfied after supplying following Vibration. | (1)VIBRATION FREQUENCY: 1055Hz (2)REPEATED PERIOD: 12min (3)FULL CYCLE: 1.5mm PP (4)DIRECTION: X.Y.Z (5)TIME: 2hours/each direction |
| STRENGTH OF TERMINALS/LEADWIRES () | -1 PULLING: 900g tension weight for 30 sec. No visual damages. | -2 BENDING: 90degree bending with 225gs tension weight. No visual damages. |
| SEALING TIGHTNESS () | No observation of gas bubble after specimen put in hot water at +90+95 for 5 min. | |
| SOLDERING DIP () | Terminals/lead-wires dipped into solder melted tank at +2305 for 3sec. Dipping depth 2mm from body. Over 90% coverage. (With ROSIN flux) | |
| SOLDER HEATING () | Terminals/lead-wires dipped into solder melted tank at +35010 for 3 sec. Electrical characteristics shall be satisfied. Dipping depth 2mm from edge. | |
| II ENVIRONMENTAL ENDURANCE () | Provided that measurement shall be carried out after letting it alone in the room temperature for 1 hour. | |
| HUMIDITY () | Electrical characteristics shall be satisfied after letting it alone at 602 in humidity of 9095% for 250 hours. | |
| STORAGE IN LOW TEMPERATURE () | Electrical characteristics shall be satisfied after letting it alone at -302 for 250 hours. | |
| STORAGE IN HIGH TEMPERATURE () | Electrical characteristics shall be satisfied after letting it alone at +852 for 250 hours. | |
| TEMPERATURE CYCLE () | Electrical characteristics shall be satisfied after supplying the following temperature cycle (3cycles). Temperature shift 1/min. | (Refer to Fig-2) |
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
Beijing Silk Road Enterprise Management Services Co., Ltd.
Location
16 Floor, Unit B, Jiatai International Mansion, No 41, Dongsihuan Zhong Road, Chaoyang District, Beijing
Contact Person
Sellina