Quartz crystal resonator KYX KUS240000920 featuring 24 megahertz frequency and temperature stability

Price Negotiable

Price: Negotiable

MOQ: Negotiable

Delivery Time: Negotiable

Product Description

Quartz Crystal Resonator Specification

Product Name: Quartz Crystal Resonator

Product Model: HC-49SJJ/24.000MHZ

Original Model: KUS240000920

Manufacturer: Shenzhen Kaiyuexiang Electronics Co., Ltd.

Factory Address: 4th Floor, Building 1, Caifa Industrial City, Renmin Road, Guanlan, Longhua District, Shenzhen

Contact: TEL: 0755-89315823, 89315866 | FAX: 0755-89315223 | Website: www.kaiyuexiang.com

Product Attributes

Brand: Kaiyuexiang
Origin: Shenzhen, China

Technical Specifications

Item	Parameter	Value
1. GENERAL
Holder Type	49US AT CUT
Mode of Vibration	FUND S&A
Oscillation Mode	KH-1240
Storage Temperature	-40 TO +85
Driver Level	100W
2. ELECTRICAL PARAMETER
Normal Frequency	24.000 MHz
Frequency Tolerance (252)	20ppm
Temperature Stability	20ppm
Operating Temperature Range	-20 TO +70
Load Capacitance	9 PF
Motional Capacitance	3PF MAX
Shunt Capacitance
Effective Series Resistance	40 MAX
Insulation Resistance	500M OHMS MIN AT DC 100V
3. MECHANICAL PARAMETER
Solderability	95% COVERAGE BY USING 90/10 SOLD AT 245FOR 5 SEC. DIPING AFTER IMMERSION IN ALPHA 611 FLUX FOR 5 SEC.
Mechanical Endurance
Shock	Electrical characteristics shall be satisfied after dropping three times from the height of 50 cm onto Hard wooden board.
Vibration	Frequency: 1055Hz, Period: 12min, Amplitude: 1.5mm PP, Direction: X.Y.Z, Time: 2hours/each direction
Strength of Terminals/Lead-wires (Pulling)	900g of tension weight shall be supplied gradually to axial direction of terminals/lead-wires for 30 sec. No visual damages.
Strength of Terminals/Lead-wires (Bending)	90degree bending with 225gs tension weight, then straightened gradually. Repeated to opposite direction. No visual damages.
Sealing Tightness	No observation of gas bubble after specimen put in hot water at +90+95 for 5 min.
Soldering Dip	Terminals/lead-wires dipped into solder at +2305 for 3sec. Dipping depth 2mm from body. Over 90% coverage.
Solder Heating	Terminals/lead-wires dipped into solder at +35010 for 3 sec. Electrical characteristics shall be satisfied.
Environmental Endurance
Humidity	Electrical characteristics shall be satisfied after 250 hours at 602, 90-95% humidity.
Storage in Low Temperature	Electrical characteristics shall be satisfied after 250 hours at -302.
Storage in High Temperature	Electrical characteristics shall be satisfied after 250 hours at +852.
Temperature Cycle	Electrical characteristics shall be satisfied after 3 cycles. Temperature shift 1/min.