Precision quartz crystal resonator KYX KUS160000910 16 MHz frequency suitable for electronic devices

Price Negotiable

Price: Negotiable

MOQ: Negotiable

Delivery Time: Negotiable

Product Description

Product Overview

This specification document outlines the details for the Kaiyuexiang Quartz Crystal Resonator, model 49US/16.000MHZ. It is designed for general electronic applications requiring precise frequency control.

Product Attributes

Brand: Kaiyuexiang
Origin: Shenzhen, China
Product Name: Quartz Crystal Resonator
Product Model: 49US/16.000MHZ
Manufacturer Model: KUS160000910

Technical Specifications

Parameter	Value	Unit	Notes
1. GENERAL
HOLDER TYPE	49US
MODE OF VIBRATION	AT CUT		FUNDAMENTAL
OSCILLATION MODE	S&A		KH-1240
STORAGE TEMPERATURE	-40 to +85
DRIVER LEVEL	100	W
2. ELECTRICAL PARAMETER
NORMAL FREQUENCY	16.000	MHz
FREQUENCY TOLERANCE (252)	10	ppm
TEMPERATURE STABILITY	20	ppm
OPERATING TEMPERATURE RANGE	-20 to +70
LOAD CAPACITANCE	9	PF
MOTIONAL CAPACITANCE	5	PF	MAX
SHUNT CAPACITANCE
EFFECTIVE SERIES RESISTANCE	60		MAX
INSULATION RESISTANCE	500	M OHMS	MIN AT DC 100V
3. MECHANICAL PARAMETER
SOLDERABILITY	95% COVERAGE BY USING 90/10 SOLD AT 245 FOR 5 SEC.		DIPPING AFTER IMMERSION IN ALPHA 611 FLUX FOR 5 SEC.
4. MECHANICAL ENDURANCE
SHOCK	Electrical characteristics shall be satisfied after dropping three times from the height of 50 cm onto Hard wooden board.
VIBRATION	Electrical characteristics shall be satisfied after supplying following Vibration. Frequency: 10-55Hz, Period: 1-2min, Amplitude: 1.5mm P-P, Direction: X.Y.Z, Time: 2 hours/each direction.
STRENGTH OF TERMINALS/LEAD-WIRES (PULLING)	900g of tension weight shall be supplied gradually to axial direction of terminals/lead-wires for 30 sec. No visual damages.
STRENGTH OF TERMINALS/LEAD-WIRES (BENDING)	90-degree bending with 225g tension weight, then straightened. Repeated in opposite direction. No visual damages.
SEALING TIGHTNESS	No gas bubble after specimen put in hot water at +90+95 for 5 min.
SOLDERING DIP	Terminals/lead-wires dipped into solder at +2305 for 3sec. Depth: 2mm from bottom of body. Over 90% coverage.
SOLDER HEATING	Terminals/lead-wires dipped into solder at +35010 for 3 sec. Depth: 2mm from edge. Electrical characteristics shall be satisfied.
5. ENVIRONMENTAL ENDURANCE
HUMIDITY	Electrical characteristics shall be satisfied after 250 hours at 602 and 90-95% humidity.
STORAGE IN LOW TEMPERATURE	Electrical characteristics shall be satisfied after 250 hours at -302.
STORAGE IN HIGH TEMPERATURE	Electrical characteristics shall be satisfied after 250 hours at +852.
TEMPERATURE CYCLE	Electrical characteristics shall be satisfied after 3 cycles. Temperature shift rate: 1/min.