Quartz Crystal Resonator 32 MHz Frequency Control KYX KUS320002030 Electronic Component for Circuits

Price Negotiable

Price: Negotiable

MOQ: Negotiable

Delivery Time: Negotiable

Product Description

Quartz Crystal Resonator

This document specifies the Quartz Crystal Resonator, model 49US/32.000MHZ, manufactured by Shenzhen Kaiyuexiang Electronics Co., Ltd. It is designed for applications requiring precise frequency control.

Product Attributes

Brand: Kaiyuexiang
Origin: Shenzhen, China
Manufacturer: Shenzhen Kaiyuexiang Electronics Co., Ltd.
Website: www.kaiyuexiang.com

Technical Specifications

Parameter	Specification	Unit	Notes
1. GENERAL
HOLDER TYPE	49US
MODE OF VIBRATION	AT CUT
OSCILLATION MODE	FUND S&A
TEST FACILITIES	KH-1240
STORAGE TEMPERATURE	-40 to +85
DRIVER LEVEL	100	W
2. ELECTRICAL PARAMETER
NORMAL FREQUENCY	32.000	MHz
FREQUENCY TOLERANCE (252)	30	ppm
TEMPERATURE STABILITY	20	ppm
OPERATING TEMPERATURE RANGE	-20 to +70
LOAD CAPACITANCE	20	PF
MOTIONAL CAPACITANCE	5 MAX	PF
SHUNT CAPACITANCE
EFFECTIVE SERIES RESISTANCE	40 MAX
INSULATION RESISTANCE	500 MIN	M OHMS	AT DC 100V
3. MECHANICAL PARAMETER
SOLDERABILITY	95% COVERAGE BY USING 90/10 SOLD AT 245 FOR 5 SEC. DIPING AFTER IMMERSION IN ALPHA 611 FLUX FOR 5 SEC.
MECHANICAL ENDURANCE - SHOCK	Electrical characteristics shall be satisfied after dropping three times from the height of 50 cm onto Hard wooden board.
MECHANICAL ENDURANCE - VIBRATION	Electrical characteristics shall be satisfied after supplying following Vibration. (1)FREQUENCY: 1055Hz (2)PERIOD: 12min (3)AMPLITUDE: 1.5mm PP (4)DIRECTION: X.Y.Z (5)TIME: 2hours/each direction
MECHANICAL ENDURANCE - STRENGTH OF TERMINALS/LEAD-WIRES - PULLING	Body of specimen shall be fixed, and 900g of tension weight shall be supplied gradually to axial direction of terminals/lead-wires for 30 sec. No visual damages on the specimen.
MECHANICAL ENDURANCE - STRENGTH OF TERMINALS/LEAD-WIRES - BENDING	Body of specimen shall be fixed, and 90degree bending shall be given, being supplied 225gs tension weight. Then straightened gradually. Repeat to opposite direction. No visual damages on the specimen.
MECHANICAL ENDURANCE - SEALING TIGHTNESS	No observation of gas bubble after specimen put in hot water at +90+95 for 5 min.
MECHANICAL ENDURANCE - SOLDERING DIP	Terminals/lead-wires shall be dipped into solder melted tank at +2305 for 3sec. Dipping depth 2mm from the bottom of specimens body. Soldering portion shall be covered in over 90% of terminals/lead-wires dipped. (After applying ROSIN flux)
MECHANICAL ENDURANCE - SOLDER HEATING	Terminals/lead-wires shall be dipped into solder melted tank at +35010 for 3 sec. Electrical characteristics shall be satisfied. Dipping depth 2mm from edge of terminals/lead-wires.
II ENVIRONMENTAL ENDURANCE
ENVIRONMENTAL ENDURANCE - HUMIDITY	Electrical characteristics shall be satisfied after letting it alone at 602 in humidity of 9095% for 250 hours.
ENVIRONMENTAL ENDURANCE - STORAGE IN LOW TEMPERATURE	Electrical characteristics shall be satisfied after letting it alone at -302 for 250 hours.
ENVIRONMENTAL ENDURANCE - STORAGE IN HIGH TEMPERATURE	Electrical characteristics shall be satisfied after letting it alone at +852 for 250 hours.
ENVIRONMENTAL ENDURANCE - TEMPERATURE CYCLE	Electrical characteristics shall be satisfied after supplying the following temperature cycle (3 cycles). Temperature shift from low to high, high to low shall be done in 1/min.