24 MHz Quartz Crystal Resonator KYX KUS240002030 with Effective Series Resistance Specifications

Price Negotiable

Price: Negotiable

MOQ: Negotiable

Delivery Time: Negotiable

Product Description

Product Overview

The KYX 49US/24.000MHZ is a Quartz Crystal Resonator manufactured by Shenzhen Kaiyuexiang Electronics Co., Ltd. It is designed for oscillation and features a frequency of 24.000 MHz with a frequency tolerance of 30ppm and a load capacitance of 20pF.

Product Attributes

Brand: Kaiyuexiang
Origin: Shenzhen, China
Product Name: Quartz Crystal Resonator
Product Model: 49US/24.000MHZ
Original Manufacturer Model: KUS240002030

Technical Specifications

Parameter	Value
Holder Type	49US
Mode of Vibration	AT CUT
Oscillation Mode	FUND S&A
Test Facilities	KH-1240
Storage Temperature	-40 TO +85
Driver Level	100W
Normal Frequency	24.000 MHz
Frequency Tolerance (252)	30ppm
Temperature Stability	20ppm
Operating Temperature Range	-20 TO +70
Load Capacitance	20 PF
Motional Capacitance	5PF MAX
Shunt Capacitance	40 MAX
Effective Series Resistance	500M OHMS MIN AT DC 100V
Insulation Resistance	95% COVERAGE BY USING 90/10 SOLD AT 245FOR 5 SEC. DIPING AFTER IMMERSION IN ALPHA 611 FLUX FOR 5 SEC.
Solderability	95% COVERAGE BY USING 90/10 SOLD AT 245FOR 5 SEC. DIPING AFTER IMMERSION IN ALPHA 611 FLUX FOR 5 SEC.
Shock Test	Electrical characteristics shall be satisfied after dropping three times from the height of 50 cm onto Hard wooden board.
Vibration Test	Electrical characteristics shall be satisfied after supplying Vibration: Frequency 1055Hz, Period 12min, Full Amplitude 1.5mm P-P, Direction X.Y.Z, Time 2 hours/each direction.
Strength of Terminals/Lead-wires (Pulling)	Body of specimen shall be fixed, and 900g of tension weight shall be supplied gradually to axial direction of terminals/lead-wires for 30 sec. No visual damages after test.
Strength of Terminals/Lead-wires (Bending)	Body of specimen shall be fixed, and 90degree bending shall be given, being supplied 225gs tension weight. Then straightened gradually. Same bending and straightening to the opposite direction. No visual damages after test.
Sealing Tightness	No observation of gas bubble after specimen put in hot water at +90+95 for 5 min.
Soldering Dip	Terminals/lead-wires of specimen shall be dipped into solder melted tank at +2305 for 3sec. Dipping depth shall be 2mm from the bottom of specimens body. Soldering portion shall be covered in over 90% of terminals/lead-wires dipped.
Solder Heating	Terminals/lead-wires of specimen shall be dipped into solder melted tank at +35010 for 3-4 sec. Electrical characteristics shall be satisfied after dipping depth shall be 2mm from edge of terminals/lead-wires.
Humidity Test	Electrical characteristics shall be satisfied after letting it alone at 602 in humidity of 9095% for 250 hours.
Storage in Low Temperature	Electrical characteristics shall be satisfied after letting it alone at -302 for 250 hours.
Storage in High Temperature	Electrical characteristics shall be satisfied after letting it alone at +852 for 250 hours.
Temperature Cycle	Electrical characteristics shall be satisfied after supplying the following temperature cycle (3 cycles). Temperature shift from low to high, high to low shall be done in 1/min.