Stable frequency Quartz Crystal Resonator KYX KUS160001120 HC 49SJJ 16 MHz for electronic circuits
Price:
Negotiable
MOQ:
Negotiable
Delivery Time:
Negotiable
Product Description
Product Overview
The HC-49SJJ/16.000MHZ is a Quartz Crystal Resonator manufactured by Shenzhen Kaiyuexiang Electronics Co., Ltd. It is designed for applications requiring stable frequency oscillations.
Product Attributes
- Brand: Kaiyuexiang
- Origin: Shenzhen, China
- Product Name: Quartz Crystal Resonator
- Product Model: HC-49SJJ/16.000MHZ
- Original Model: KUS160001120
Technical Specifications
| Specification | Parameter |
| Holder Type | 49US AT CUT |
| Mode of Vibration | FUND S&A KH-1240 |
| Oscillation Mode | -40TO +85 |
| Test Facilities | 100W |
| Storage Temperature | 16.000 MHz |
| Driver Level | 20ppm |
| Normal Frequency | 20ppm |
| Frequency Tolerance252 | -20TO +70 |
| Temperature Stability | 11 PF |
| Operating Temperature Range | 3PF MAX |
| Load Capacitance | 60 MAX |
| Motional Capacitance | 500M OHMS MIN AT DC 100V |
| Shunt Capacitance | 95%COVERAGE BY USING 90/10 SOLD AT 245FOR 5 SEC. DIPING AFTER IMMERSION IN ALPHA 611 FLUX FOR 5 SEC. |
| Effective Series Resistance | Provided that measurement shall be carried out after letting it alone in the room temperature for 1 hour. |
| Insulation Resistance | Electrical characteristics shall be satisfied after dropping three time from the height of 50 cm onto Hard wooden board . |
| Solderability | Electrical characteristics shall be satisfied after supplying following Vibration . |
| Shock | 1055Hz |
| Vibration | 12min |
| Strength of Terminals/LeadWires (Pulling) | 1.5mm PP |
| Strength of Terminals/LeadWires (Bending) | X.Y.Z |
| Sealing Tightness | 2hours/each direction |
| Soldering Dip | Body of specimen shall be fixed, and 900g of tension weight shall be supplied gradually to axial direction of terminals/lead-wires for 30 sec . After above test a), there is no observation of any visual damages on the specimen. |
| Solder Heating | Body of specimen shall be fixed, and 90degree bending shall be given, being supplied 225gs tension weight . After that, terminals/lead-wires shall be straightened gradually . Then the same bending and straightening shall be supplied to the opposite direction in the same axial . (Refer to Fig-1) b)After above test a), there is no observation of any visual damages on the specimen . |
| Humidity | There is no observation of gas bubble after specimen put in hot water at +90+95for 5 min . |
| Storage in Low Temperature | Terminals/lead-wires of specimen shall be dipped into solder melted tank at +2305 for 3sec . Dipping depth shall be 2mm from the bottom of specimens body . (After applying ROSIN flux) Soldering portion shall be covered in over 90% of terminals/lead-wires dipped . |
| Storage in High Temperature | Terminals/lead-wires of specimen shall be dipped into solder melted tank at +1 +35010 for 3 sec . Electrical characteristics shall be satisfied after dipping depth shall be 2mm from edge of terminals/lead-wires . |
| Temperature Cycle | Provided that measurement shall be carried out after letting it alone in the room temperature for 1 hour . |
| Electrical characteristics shall be satisfied after letting it alone at 602in humidity of 9095% for 250 hours . | |
| Electrical characteristics shall be satisfied after letting it alone at -302for 250 hours . | |
| Electrical characteristics shall be satisfied after letting it alone at +852for 250 hours . | |
| Electrical characteristics shall be satisfied after supplying the following temperature cycle (3cycles) . Temperature shift from low to high, high to low shall be done in 1/min (Refer to Fig-2) . |
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
Beijing Silk Road Enterprise Management Services Co., Ltd.
Location
16 Floor, Unit B, Jiatai International Mansion, No 41, Dongsihuan Zhong Road, Chaoyang District, Beijing
Contact Person
Sellina