Quartz Crystal Resonator 49US 6000MHZ Model KYX KUS060002030 for Frequency Generation in Electronics

Price Negotiable

Price: Negotiable

MOQ: Negotiable

Delivery Time: Negotiable

Product Description

Product Overview

The Kaiyuexiang 49US/6.000MHZ Quartz Crystal Resonator is a high-quality electronic component designed for precise frequency generation. It is manufactured by Shenzhen Kaiyuexiang Electronics Co., Ltd. and is suitable for various electronic applications requiring stable oscillation.

Product Attributes

Brand: Kaiyuexiang
Origin: Shenzhen, China
Product Name: Quartz Crystal Resonator
Product Model: 49US/6.000MHZ
Original Manufacturer Model: KUS060002030
Technical Department Contact: Dong Zongquan

Technical Specifications

Section	Parameter	Specification	Unit	Notes
GENERAL	HOLDER TYPE	49US
GENERAL	MODE OF VIBRATION	AT CUT
GENERAL	OSCILLATION MODE	FUND S&A KH-1240
GENERAL	TEST FACILITIES
GENERAL	STORAGE TEMPERATURE	-40 TO +85
GENERAL	DRIVER LEVEL	100W
ELECTRICAL PARAMETER	NORMAL FREQUENCY	6.000 MHz
ELECTRICAL PARAMETER	FREQUENCY TOLERANCE (252)	30ppm
ELECTRICAL PARAMETER	TEMPERATURE STABILITY	20ppm
ELECTRICAL PARAMETER	OPERATING TEMPERATURE RANGE	-20 TO +70
ELECTRICAL PARAMETER	LOAD CAPACITANCE	20 PF
ELECTRICAL PARAMETER	MOTIONAL CAPACITANE	5PF MAX
ELECTRICAL PARAMETER	SHUNT CAPACITANCE
ELECTRICAL PARAMETER	EFFECTIVE SERIES RESISTANCE	250 MAX
ELECTRICAL PARAMETER	INSULATION RESISTANCE	500M OHMS MIN	DC 100V
MECHANICAL PARAMETER	SOLDERABILITY	95% COVERAGE BY USING 90/10 SOLD AT 245 FOR 5 SEC. DIPING AFTER IMMERSION IN ALPHA 611 FLUX FOR 5 SEC.
MECHANICAL ENDURANCE	SHOCK	Electrical characteristics shall be satisfied after dropping three times from the height of 50 cm onto Hard wooden board.
MECHANICAL ENDURANCE	VIBRATION	Electrical characteristics shall be satisfied after supplying following Vibration.
		VIBRATION FREQUENCY: 1055Hz		REPEATED PERIOD: 12min, FULL CYCLE: 1.5mm PP, DIRECTION: X.Y.Z, TIME: 2hours/each direction
MECHANICAL ENDURANCE	STRENGTH OF TERMINALS/LEADWIRES (PULLING)	Body of specimen shall be fixed, and 900g of tension weight shall be supplied gradually to axial direction of terminals/lead-wires for 30 sec. No visual damages observed after test.
MECHANICAL ENDURANCE	STRENGTH OF TERMINALS/LEADWIRES (BENDING)	Body of specimen shall be fixed, and 90degree bending shall be given, being supplied 225gs tension weight. Terminals/lead-wires shall be straightened gradually. No visual damages observed after test.		Refer to Fig-1
MECHANICAL ENDURANCE	SEALING TIGHTNESS	No observation of gas bubble after specimen put in hot water at +90+95 for 5 min.
MECHANICAL ENDURANCE	SOLDERING DIP	Terminals/lead-wires of specimen shall be dipped into solder melted tank at +2305 for 3sec. Dipping depth shall be 2mm from the bottom of specimens body. Soldering portion shall be covered in over 90% of terminals/lead-wires dipped.		(After applying ROSIN flux)
MECHANICAL ENDURANCE	SOLDER HEATING	Terminals/lead-wires of specimen shall be dipped into solder melted tank at +35010 for 3 sec. Electrical characteristics shall be satisfied.		Dipping depth shall be 2mm from edge of terminals/lead-wires.
ENVIRONMENTAL ENDURANCE	HUMIDITY	Electrical characteristics shall be satisfied after letting it alone at 602 in humidity of 9095% for 250 hours.
ENVIRONMENTAL ENDURANCE	STORAGE IN LOW TEMPERATURE	Electrical characteristics shall be satisfied after letting it alone at -302 for 250 hours.
ENVIRONMENTAL ENDURANCE	STORAGE IN HIGH TEMPERATURE	Electrical characteristics shall be satisfied after letting it alone at +852 for 250 hours.
ENVIRONMENTAL ENDURANCE	TEMPERATURE CYCLE	Electrical characteristics shall be satisfied after supplying the following temperature cycle (3 cycles). Temperature shift from low to high, high to low shall be done in 1/min.		Refer to Fig-2