Electronic Component HC 49USSMD 26 280 MHz Crystal Oscillator KYX KSD262802030 with 20ppm Stability
Price:
Negotiable
MOQ:
Negotiable
Delivery Time:
Negotiable
Product Description
HC-49USSMD/26.280 MHZ
- : (Kaiyuexiang)
- :
- :
- : HC-49USSMD/26.280 MHZ
- : KSD262802030
| Holder Type | HC-49USSMD | ||
| Mode of Vibration | FUND | ||
| Oscillation Mode | S&A | ||
| Storage Temperature | -40TO +85 | ||
| Driver Level | 100W | ||
| Normal Frequency | 26.280 MHz | ||
| Frequency Tolerance (252) | 30ppm | ||
| Temperature Stability | 20ppm | ||
| Operating Temperature Range | -20TO +70 | ||
| Load Capacitance | 20 PF | ||
| Motional Capacitance | 5PF MAX | ||
| Shunt Capacitance | |||
| Effective Series Resistance | 40 MAX | ||
| Insulation Resistance | 500M OHMS MIN | AT DC 100V | |
| Solderability | 95% COVERAGE BY USING 90/10 SOLD AT 245FOR 5 SEC. DIPING AFTER IMMERSION IN ALPHA 611 FLUX FOR 5 SEC. |
| Shock () | Electrical characteristics shall be satisfied after dropping three time from the height of 50 cm onto Hard wooden board. |
| Vibration () | Electrical characteristics shall be satisfied after supplying following Vibration: Frequency 1055Hz, Period 12min, Amplitude 1.5mm P-P, Direction X.Y.Z, Time 2hours/each direction. |
| Strength of Terminals/Lead-wires () | - Pulling: 900g tension weight for 30 sec. No visual damages. - Bending: 90degree bending with 225gs tension weight, then straighten. Repeat in opposite direction. No visual damages. |
| Sealing Tightness () | No observation of gas bubble after specimen put in hot water at +90+95 for 5 min. |
| Soldering Dip () | Terminals/lead-wires dipped into solder at +2305 for 3sec. Dipping depth 2mm from body bottom. Soldering portion over 90%. |
| Solder Heating () | Terminals/lead-wires dipped into solder at +35010 for 3 sec. Electrical characteristics shall be satisfied. |
| Humidity () | Electrical characteristics shall be satisfied after exposure at 602, 9095% humidity for 250 hours. |
| Storage in Low Temperature () | Electrical characteristics shall be satisfied after exposure at -302 for 250 hours. |
| Storage in High Temperature () | Electrical characteristics shall be satisfied after exposure at +852 for 250 hours. |
| Temperature Cycle () | Electrical characteristics shall be satisfied after 3 cycles of temperature change (low to high, high to low) at 1/min rate. |
:
TEL0755-89315823 / 89315866
FAX0755-89315223
www.kaiyuexiang.com
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
Beijing Silk Road Enterprise Management Services Co., Ltd.
Location
16 Floor, Unit B, Jiatai International Mansion, No 41, Dongsihuan Zhong Road, Chaoyang District, Beijing
Contact Person
Sellina