HC49USSMD 26 MHz Quartz Crystal Resonator KYX KSD260000920 Frequency Stability Electronic Component

Price Negotiable

Price: Negotiable

MOQ: Negotiable

Delivery Time: Negotiable

Product Description

Product Overview

The HC-49USSMD/26.000 MHZ is a Quartz Crystal Resonator manufactured by Shenzhen Kaiyuexiang Electronics Co., Ltd. It is designed for applications requiring precise frequency control.

Product Attributes

Brand: Kaiyuexiang
Origin: Shenzhen, China
Product Name: Quartz Crystal Resonator
Product Model: HC-49USSMD/26.000 MHZ
Original Model: KSD260000920

Technical Specifications

Parameter	Value
Holder Type	HC-49USSMD
Mode of Vibration	AT CUT
Oscillation Mode	FUND S&A
Test Facilities	KH-1240
Storage Temperature	-40 TO +85
Driver Level	100W
Normal Frequency	26.000 MHz
Frequency Tolerance (252)	20ppm
Temperature Stability	20ppm
Operating Temperature Range	-20 TO +70
Load Capacitance	9 PF
Motional Capacitance	5PF MAX
Shunt Capacitance	40MAX
Effective Series Resistance	500M OHMS MIN AT DC 100V
Insulation Resistance	AT DC 100V
Solderability	95% COVERAGE BY USING 90/10 SOLD AT 245FOR 5 SEC. DIPING AFTER IMMERSION IN ALPHA 611 FLUX FOR 5 SEC.
Shock Test	Electrical characteristics shall be satisfied after dropping three times from the height of 50 cm onto Hard wooden board.
Vibration Test	Electrical characteristics shall be satisfied after supplying following Vibration: (1)VIBRATION FREQUENCY 1055Hz (2)REPEATED PERIOD 12min (3)FULL CYCLE 1.5mm PP (4)DIRECTION X.Y.Z (5)TIME 2hours/each direction
Strength of Terminals/Lead-Wires (Pulling)	Body of specimen shall be fixed, and 900g of tension weight shall be supplied gradually to axial direction of terminals/lead-wires for 30 sec. After above test, there is no observation of any visual damages on the specimen.
Strength of Terminals/Lead-Wires (Bending)	Body of specimen shall be fixed, and 90degree bending shall be given, being supplied 225gs tension weight. After that, terminals/lead-wires shall be straightened gradually. Then the same bending and straightening shall be supplied to the opposite direction in the same axial. After above test, there is no observation of any visual damages on the specimen.
Sealing Tightness	There is no observation of gas bubble after specimen put in hot water at +90+95 for 5 min.
Soldering Dip	Terminals/lead-wires of specimen shall be dipped into solder melted tank at +2305 for 3sec. Dipping depth shall be 2mm from the bottom of specimens body. (After applying ROSIN flux) Soldering portion shall be covered in over 90% of terminals/lead-wires dipped.
Solder Heating	Terminals/lead-wires of specimen shall be dipped into solder melted tank at +35010 for 3 sec. Electrical characteristics shall be satisfied after dipping depth shall be 2mm from edge of terminals/lead-wires.
Humidity Test	Electrical characteristics shall be satisfied after letting it alone at 602 in humidity of 9095% for 250 hours.
Storage in Low Temperature	Electrical characteristics shall be satisfied after letting it alone at -302 for 250 hours.
Storage in High Temperature	Electrical characteristics shall be satisfied after letting it alone at +852 for 250 hours.
Temperature Cycle Test	Electrical characteristics shall be satisfied after supplying the following temperature cycle (3 cycles). Temperature shift from low to high, high to low shall be done in 1/min.