37.5 MHz Frequency Crystal Oscillator KYX KUS375001210 Featuring 12PF Load Capacitance for Circuits

Price Negotiable

Price: Negotiable

MOQ: Negotiable

Delivery Time: Negotiable

Product Description

49US/37.500MHZ

KUS375001210

12PF/10ppm

0755-89315823 / 89315866
0755-89315223
www.kaiyuexiang.com


1. GENERAL ()
HOLD TYPE ()	49US
MODE OF VIBRATION ()	AT CUT
OSCILLATION MODE ()	FUNDAMENTAL
TEST FACILITIES ()	S&A KH-1240
STORAGE TEMPERATURE ()	-40 TO +85
DRIVER LEVEL ()	100W
2. ELECTRICAL PARAMETER ()
NORMAL FREQUENCY ()	37.500 MHz
FREQUENCY TOLERANCE () (252)	10ppm
TEMPERATURE STABILITY ()	20ppm
OPERATING TEMPERATURE RANGE ()	-20 TO +70
LOAD CAPACITANCE ()	12 PF
MOTIONAL CAPACITANCE ()	5PF MAX
SHUNT CAPACITANCE ()
EFFECTIVE SERIES RESISTANCE ()	40 MAX
INSULATION RESISTANCE ()	500M OHMS MIN	AT DC 100V
3. MECHANICAL PARAMETER ()
SOLDERABILITY ()	95% COVERAGE BY USING 90/10 SOLD AT 245 FOR 5 SEC. DIPING AFTER IMMERSION IN ALPHA 611 FLUX FOR 5 SEC.
Mechanical Endurance ()
SHOCK ()	Electrical characteristics shall be satisfied after dropping three time from the height of 50 cm onto Hard wooden board.
VIBRATION ()	Electrical characteristics shall be satisfied after supplying following Vibration. (1)VIBRATION FREQUENCY: 1055Hz (2)REPEATED PERIOD: 12min (3)FULL CYCLE: 1.5mm PP (4)DIRECTION: X.Y.Z (5)TIME: 2hours/each direction
STRENGTH OF TERMINALS/LEAD-WIRES ()	1. PULLING: 900g tension weight for 30 sec. (no visual damages) 2. BENDING: 90degree bending with 225gs tension weight, then straighten (no visual damages)
SEALING TIGHTNESS ()	No gas bubble after specimen put in hot water at +90+95 for 5 min.
SOLDERING DIP ()	Terminals/lead-wires dipped into solder at +2305 for 3sec. Dipping depth 2mm from body bottom. Soldering portion >90% coverage.
SOLDER HEATING ()	Terminals/lead-wires dipped into solder at +35010 for 3 sec. Dipping depth 2mm from edge. Electrical characteristics shall be satisfied.
Environmental Endurance ()
HUMIDITY ()	Electrical characteristics shall be satisfied after 250 hours at 602, 9095% humidity.
STORAGE IN LOW TEMPERATURE ()	Electrical characteristics shall be satisfied after 250 hours at -302.
STORAGE IN HIGH TEMPERATURE ()	Electrical characteristics shall be satisfied after 250 hours at +852.
TEMPERATURE CYCLE ()	Electrical characteristics shall be satisfied after 3 cycles. Temperature shift rate 1/min.