Quartz Crystal Resonator KYX KSD240001620 24 MHz Frequency Control Component for Electronic Devices

Price Negotiable

Price: Negotiable

MOQ: Negotiable

Delivery Time: Negotiable

Product Description

Product Overview

This specification document details the HC-49USSMD Quartz Crystal Resonator from Shenzhen Kaiyuexiang Electronics Co., Ltd. It is designed for applications requiring precise frequency control.

Product Attributes

Brand: Kaiyuexiang
Origin: Shenzhen, China
Product Name: Quartz Crystal Resonator
Product Model: HC-49USSMD/24.000 MHZ
Original Model: KSD240001620
Manufacturer: Shenzhen Kaiyuexiang Electronics Co., Ltd.

Technical Specifications

Parameter	Specification	Details
General
Holder Type	HC-49USSMD
Mode of Vibration	AT CUT
Oscillation Mode	FUND S&A
Test Facilities	KH-1240
Storage Temperature	-40 TO +85
Driver Level	100W
Electrical Parameter
Normal Frequency	24.000 MHz
Frequency Tolerance (252)	20ppm
Temperature Stability	20ppm
Operating Temperature Range	-20 TO +70
Load Capacitance	16 PF
Motional Capacitance	5PF MAX
Shunt Capacitance
Effective Series Resistance	40 MAX
Insulation Resistance	500M OHMS MIN AT DC 100V
Mechanical Parameter
Solderability	95% COVERAGE BY USING 90/10 SOLD AT 245FOR 5 SEC. DIPING AFTER IMMERSION IN ALPHA 611 FLUX FOR 5 SEC.
Mechanical Endurance		*Measurement after 1 hour at room temperature.
Shock Resistance	Electrical characteristics satisfied after dropping 3 times from 50 cm onto hard wooden board.
Vibration Resistance	Electrical characteristics satisfied after supplying vibration: Frequency 10-55Hz, Period 1-2min, Amplitude 1.5mm P-P, Direction X.Y.Z, Time 2 hours/each direction.
Strength of Terminals/Lead-Wires	Pulling Test: Body fixed, 900g tension weight applied axially for 30 sec. No visual damage after test.	Bending Test: Body fixed, 90 bending with 225g tension weight, then straightened. Repeated in opposite direction. No visual damage after test.
Sealing Tightness	No gas bubble observed after specimen in hot water at +90+95 for 5 min.
Soldering Dip	Terminals/lead-wires dipped into solder at +2305 for 3 sec. Dipping depth 2mm from body bottom. Over 90% coverage on terminals/lead-wires. (After applying ROSIN flux)
Solder Heating Resistance	Electrical characteristics satisfied after dipping terminals/lead-wires into solder at +35010 for 3 sec. Dipping depth 2mm from edge of terminals/lead-wires.
Environmental Endurance		*Measurement after 1 hour at room temperature.
Humidity Resistance	Electrical characteristics satisfied after 250 hours at 602, 90-95% humidity.
Storage in Low Temperature	Electrical characteristics satisfied after 250 hours at -302.
Storage in High Temperature	Electrical characteristics satisfied after 250 hours at +852.
Temperature Cycle	Electrical characteristics satisfied after 3 cycles. Temperature shift 1/min (low to high, high to low).