16 MHz Crystal Oscillator with 20PF Load Capacitance and AT Cut Mode KYX KSD160002030 HC49USSMD Type
Price:
Negotiable
MOQ:
Negotiable
Delivery Time:
Negotiable
Product Description
HC-49USSMD/16.000 MHZ
20PF/30ppm
KSD160002030
TEL0755-89315823 89315866 FAX0755-89315223
www.kaiyuexiang.com
| 1. GENERAL | ||
| HOLDER TYPE | HC-49USSMD | |
| MODE OF VIBRATION | AT CUT | FUND |
| OSCILLATION MODE | S&A | KH-1240 |
| TEST FACILITIES | ||
| STORAGE TEMPERATURE | -40TO +85 | |
| DRIVER LEVEL | 100W | |
| 2. ELECTRICAL PARAMETER | ||
| NORMAL FREQUENCY | 16.000 MHz | |
| FREQUENCY TOLERANCE252 | 30ppm | |
| TEMPERATURE STABILITY | 20ppm | |
| OPERATING TEMPERATURE RANGE | -20TO + 70 | |
| LOAD CAPACITANCE | 20 PF | |
| MOTIONAL CAPACITANE | 5PF MAX | |
| SHUNT CAPACITANCE | 60MAX | |
| EFFECTIVE SERIES RESISTANCE | 500M OHMS MIN AT DC 100V | |
| INSULATION RESISTANCE | 95%COVERAGE BY USING 90/10 SOLD AT 245FOR 5 SEC. DIPING AFTER IMMERSION IN ALPHA 611 FLUX FOR 5 SEC. | |
| 3. MECHANICAL PARAMETER | ||
| SOLDERABILITY | ||
| MECHANICAL ENDURANCE | ||
| SHOCK | Electrical characteristics shall be satisfied after dropping three time from the height of 50 cm onto Hard wooden board . | 50 cm 3 |
| VIBRATION | Electrical characteristics shall be satisfied after supplying following Vibration . | |
| VIBRATION FREQUENCY | 1055Hz | |
| REPEATED PERIOD | 12min | |
| FULL CYCLE | 1.5mm PP | |
| DIRECTION | X.Y.Z | |
| TIME | 2hours/each direction | 2 / |
| STRENGTH OF TERMINALS/LEADWIRES | ||
| PULLING | a)Body of specimen shall be fixed, and 900g of tension weight shall be supplied gradually to axial direction of terminals/lead-wires for 30 sec . b)After above test a), there is no observation of any visual damages on the specimen. | a)900g /30 b)a) |
| BENDING | a)Body of specimen shall be fixed, and 90degree bending shall be given, being supplied 225gs tension weight . After that, terminals/lead-wires shall be straightened gradually . Then the same bending and straightening shall be supplied to the opposite direction in the same axial . (Refer to Fig-1) b)After above test a), there is no observation of any visual damages on the specimen . | a)90o 225g 90 o 1 b)a) |
| SEALING TIGHTNESS | There is no observation of gas bubble after specimen put in hot water at +90+95for 5 min . | +90+955 |
| SOLDERING DIP | Terminals/lead-wires of specimen shall be dipped into solder melted tank at +2305 for 3sec . Dipping depth shall be 2mm from the bottom of specimens body . (After applying ROSIN flux) Soldering portion shall be covered in over 90% of terminals/lead-wires dipped . | +23053 2mm 90 |
| SOLDER HEATING | Terminals/lead-wires of specimen shall be dipped into solder melted tank at +1 +35010 for 3 sec . Electrical characteristics shall be satisfied after dipping depth shall be 2mm from edge of terminals/lead-wires . | +350103-4 2mm |
| ENVIRONMENTAL ENDURANCE | ||
| HUMIDITY | Electrical characteristics shall be satisfied after letting it alone at 602in humidity of 9095% for 250 hours . | 6029095%250 |
| STORAGE IN LOW TEMPERATURE | Electrical characteristics shall be satisfied after letting it alone at -302for 250 hours . | -302250 |
| STORAGE IN HIGH TEMPERATURE | Electrical characteristics shall be satisfied after letting it alone at +852for 250 hours . | +852250 |
| TEMPERATURE CYCLE | Electrical characteristics shall be satisfied after supplying the following temperature cycle (3cycles) . Temperature shift from low to high, high to low shall be done in 1/min (Refer to Fig-2) . | 3 1/2 |
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
Beijing Silk Road Enterprise Management Services Co., Ltd.
Location
16 Floor, Unit B, Jiatai International Mansion, No 41, Dongsihuan Zhong Road, Chaoyang District, Beijing
Contact Person
Sellina