8 MHz Crystal Oscillator KYX KSS800002030 with Load Capacitance 20 PF and Frequency Tolerance 30ppm

Price Negotiable

Price: Negotiable

MOQ: Negotiable

Delivery Time: Negotiable

Product Description

HC-49SSJJ/8.000MHZ

: (Kaiyuexiang)
:
:
: HC-49SSJJ/8.000MHZ
: KSS800002030


GENERAL
HOLDER TYPE	49USS AT CUT
MODE OF VIBRATION	FUND S&A
OSCILLATION MODE	KH-1240
TEST FACILITIES
STORAGE TEMPERATURE	-40TO +85
DRIVER LEVEL	100W
ELECTRICAL PARAMETER
NORMAL FREQUENCY	8.000 MHz
FREQUENCY TOLERANCE252	30ppm
TEMPERATURE STABILITY	20ppm
OPERATING TEMPERATURE RANGE	-20TO +70
LOAD CAPACITANCE	20 PF
MOTIONAL CAPACITANE	7PF MAX
SHUNT CAPACITANCE
EFFECTIVE SERIES RESISTANCE	250MAX
INSULATION RESISTANCE	500M OHMS MIN AT DC 100V
MECHANICAL PARAMETER
SOLDERABILITY	95%COVERAGE BY USING 90/10 SOLD AT 245FOR 5 SEC. DIPING AFTER IMMERSION IN ALPHA 611 FLUX FOR 5 SEC.
MECHANICAL ENDURANCE
SHOCK	Electrical characteristics shall be satisfied after dropping three time from the height of 50 cm onto Hard wooden board.
VIBRATION	(1)VIBRATION FREQUENCY 1055Hz (2)REPEATED PERIOD 12min (3)FULL CYCLE 1.5mm PP (4)DIRECTION X.Y.Z (5)TIME 2hours/each direction	Electrical characteristics shall be satisfied after supplying following Vibration.
STRENGTH OF TERMINALS/LEADWIRES	-1 PULLING: 900g tension weight for 30 sec. -2 BENDING: 90degree bending with 225gs tension weight.	No visual damages after test.
SEALING TIGHTNESS	No observation of gas bubble after specimen put in hot water at +90+95for 5 min.
SOLDERING DIP	Terminals/lead-wires dipped into solder melted tank at +2305 for 3sec. Dipping depth 2mm from the bottom of specimens body. Soldering portion shall be covered in over 90% of terminals/lead-wires dipped.	(After applying ROSIN flux)
SOLDER HEATING	Terminals/lead-wires dipped into solder melted tank at +35010 for 3 sec. Dipping depth 2mm from edge of terminals/lead-wires.	Electrical characteristics shall be satisfied after dipping.
ENVIRONMENTAL ENDURANCE
HUMIDITY	602, 9095% humidity for 250 hours.	Electrical characteristics shall be satisfied after test.
STORAGE IN LOW TEMPERATURE	-302 for 250 hours.	Electrical characteristics shall be satisfied after test.
STORAGE IN HIGH TEMPERATURE	+852 for 250 hours.	Electrical characteristics shall be satisfied after test.
TEMPERATURE CYCLE	3 cycles. Temperature shift from low to high, high to low shall be done in 1/min.	Electrical characteristics shall be satisfied after test.