Electronic Component KYX KBD135602030 Quartz Crystal Resonator with 13560 MHz Frequency Stability

Price Negotiable

Price: Negotiable

MOQ: Negotiable

Delivery Time: Negotiable

Product Description

Product Overview

The HC-49USSMD/13.560 MHZ is a Quartz Crystal Resonator manufactured by Shenzhen Kaiyuexiang Electronics Co., Ltd. It is designed for applications requiring precise frequency control.

Product Attributes

Brand: Kaiyuexiang
Origin: Shenzhen, China
Product Name: Quartz Crystal Resonator
Product Model: HC-49USSMD/13.560 MHZ
Original Manufacturer Model: KBD135602030

Technical Specifications

Parameter	Specification
General - Holder Type	HC-49USSMD
General - Mode of Vibration	AT CUT
General - Oscillation Mode	FUND S&A
General - Test Facilities	KH-1240
General - Storage Temperature	-40 TO +85
General - Driver Level	100W
Electrical Parameter - Normal Frequency	13.560 MHz
Electrical Parameter - Frequency Tolerance (252)	30ppm
Electrical Parameter - Temperature Stability	20ppm
Electrical Parameter - Operating Temperature Range	-20 TO +70
Electrical Parameter - Load Capacitance	20 PF
Electrical Parameter - Motional Capacitance	3PF MAX
Electrical Parameter - Shunt Capacitance	N/A
Electrical Parameter - Effective Series Resistance	80 MAX
Electrical Parameter - Insulation Resistance	500M OHMS MIN AT DC 100V
Mechanical Parameter - Solderability	95% COVERAGE BY USING 90/10 SOLD AT 245 FOR 5 SEC. DIPING AFTER IMMERSION IN ALPHA 611 FLUX FOR 5 SEC.
Mechanical Endurance - Shock	Electrical characteristics shall be satisfied after dropping three times from the height of 50 cm onto Hard wooden board.
Mechanical Endurance - Vibration Frequency	1055Hz
Mechanical Endurance - Vibration Period	12min
Mechanical Endurance - Vibration Full Amplitude	1.5mm PP
Mechanical Endurance - Vibration Direction	X.Y.Z
Mechanical Endurance - Vibration Time	2 hours/each direction
Mechanical Endurance - Strength of Terminals/Lead-wires - Pulling	Body of specimen shall be fixed, and 900g of tension weight shall be supplied gradually to axial direction of terminals/lead-wires for 30 sec. No visual damages after test.
Mechanical Endurance - Strength of Terminals/Lead-wires - Bending	Body of specimen shall be fixed, and 90degree bending shall be given, being supplied 225gs tension weight. No visual damages after test.
Mechanical Endurance - Sealing Tightness	No observation of gas bubble after specimen put in hot water at +90+95 for 5 min.
Mechanical Endurance - Soldering Dip	Terminals/lead-wires of specimen shall be dipped into solder melted tank at +2305 for 3sec. Dipping depth shall be 2mm from the bottom of specimens body. Over 90% coverage.
Mechanical Endurance - Solder Heating	Terminals/lead-wires of specimen shall be dipped into solder melted tank at +35010 for 3 sec. Electrical characteristics shall be satisfied. Dipping depth shall be 2mm from edge of terminals/lead-wires.
Environmental Endurance - Humidity	Electrical characteristics shall be satisfied after letting it alone at 602 in humidity of 9095% for 250 hours.
Environmental Endurance - Storage in Low Temperature	Electrical characteristics shall be satisfied after letting it alone at -302 for 250 hours.
Environmental Endurance - Storage in High Temperature	Electrical characteristics shall be satisfied after letting it alone at +852 for 250 hours.
Environmental Endurance - Temperature Cycle	Electrical characteristics shall be satisfied after supplying the following temperature cycle (3 cycles). Temperature shift from low to high, high to low shall be done in 1/min.